Catfish atty mods.

[phibbus]

Woot! Divo and Reactor arrived. Big thanks CH, and fantastic work, as previously.

I've only coiled and mounted the Divo, yet. Ohms came out slightly higher than what I'm used to getting with my 8 wraps of 28ga, so I'll have to tinker a bit. I finally more or less mastered getting 2mm RxW wick threaded into the coil, though, and flavor and production are awesome. Squonking and recovery are perfect, of course.

Draw is slightly tight for me (same as on the Cyclone AFC when I tried single coil with the non-AFC-sized airhole.) I'm a little confused by the fact, since I think it's the same 1mm that the RM2 uses, and it seems more open on that atty. I'm pretty sure I don't want to go all the way up to 1/16", though. Any suggestion on a ssize, Chowder?

I want to give the Reactor a try in single coil with stock hole, too, but I'll probably be drilling out that dimple for duals, as well.

Thanks again, sir. You're like the BF Leonardo da Vinci

 

[Chowderhead1972]

I love ya Chowder but my order got mixed up lol! I got someone's SS Odin and someone got my black one. If anyone who got a black but ordered a SS wants to do a trade please pm me!

I will work it out... Does the box have a silver dot sticker? on it or a black one? Trying to see where I screwed up. If nothing else I will send you my black cap. Let's see if there was a mix up on another one today though.

 

[Kentastic]

You're like the BF Leonardo da Vinci

HAHAHAHAHA....

 

[Chowderhead1972]

Woot! Divo and Reactor arrived. Big thanks CH, and fantastic work, as previously.

I've only coiled and mounted the Divo, yet. Ohms came out slightly higher than what I'm used to getting with my 8 wraps of 28ga, so I'll have to tinker a bit. I finally more or less mastered getting 2mm RxW wick threaded into the coil, though, and flavor and production are awesome. Squonking and recovery are perfect, of course.

Draw is slightly tight for me (same as on the Cyclone AFC when I tried single coil with the non-AFC-sized airhole.) I'm a little confused by the fact, since I think it's the same 1mm that the RM2 uses, and it seems more open on that atty. I'm pretty sure I don't want to go all the way up to 1/16", though. Any suggestion on a ssize, Chowder?

I want to give the Reactor a try in single coil with stock hole, too, but I'll probably be drilling out that dimple for duals, as well.

Thanks again, sir. You're like the BF Leonardo da Vinci

This batch of Reactors has both holes drilled from the factory albeit super tiny, I have never seen a drill bit as small as that. Looks like #80 or smaller.

As to the Divo: airflow is purely subjective and varies widely. I find #53 (1.46mm) an acceptable balance but that's just me.

 

[pennysmalls]

I will work it out... Does the box have a silver dot sticker? on it or a black one? Trying to see where I screwed up. If nothing else I will send you my black cap. Let's see if there was a mix up on another one today though.

The dot on my box is actually white. I have no problem waiting to see if anyone else chimes in about a mix up with theirs.

 

[Loopy1224]

****** The Hobo is a go******** I have ten (10) authentic Hobo V2s on the way they should be here by Friday but I'm going to take it slow on these so they will be ready next Friday (9/16) at the earliest. I have new drilling equipment on the way as well to improve the quality of my product, trying to alieviate off center holes and broken bits, hopefully I can experiment with the new set-up over this weekend and be well prepared for next weekend.



I'm only doing a short run on this one. The price will be $100 and will come with a 15ml bottle of Cuttwood Unicorn Milk in either 6mg or 12mg. If you want to vape like a Boss here's your chance. I will order colored top caps and drip tips as needed At $20 each.

1. Loopy1224, add stainless steel drip tip

2. X-Puppy, 12mg, add copper hat and drip tip

3. Caveat 12mg add black top hat, black drip tip

4.

5. YePsTeR, 12mg, add black top hat and SS drip tip

6. Beckdg, 6mg, add black top hat and drip tip ***please include original unmodified copper screw in my package***

7. Sedge, 6mg, black hat & tip

8. VeeHa 6mg, Black hat & Tip

9.

10.

Done...

I actually ordered 12 but I'm keeping 2. These things are sick!


Sent from my iPhone using Tapatalk

 

[Chowderhead1972]

The dot on my box is actually white. I have no problem waiting to see if anyone else chimes in about a mix up with theirs.

I went back and looked at my shipping list and I had you down for a SS Odin, Divo, and a Plumeveil. I went back and read your pm from 10/2 and you are correct. Send it back and I will send you a black with an I'm sorry gift.

 

[pennysmalls]

You are the bomb Chowder! I'll get it out before close of business Friday, if I can't get it out tomorrow.

 

[moresalt]

My package arrive today also. Everything is in perfect order. Cleaned and now drying. Normally Az is dry enough that by the time I type that they would be dry already, but we have rain today so it'll take a little longer.

 

[eratikmind]

Thank you, CH! I was not expecting my 2 atties to arrive so soon. Excellent job, as well, I might add.

 

[stvan1]

Oh I am loving this Divo. Great job Tom. Great flavor tons of vapor and looks great too. Thank you.

 

[Walter Ego]

Divo and Magma arrived today. Great job as always CH.

 

[phibbus]

This batch of Reactors has both holes drilled from the factory albeit super tiny, I have never seen a drill bit as small as that. Looks like #80 or smaller.

As to the Divo: airflow is purely subjective and varies widely. I find #53 (1.46mm) an acceptable balance but that's just me.

Thanks again Chowder. Yikes, I didn't realize the Reactor's was that tiny when I first looked at it. Only one is drilled through on mine, though.

I guess I'll order a range of bits and drill up until I hit the sweet spot.

 

[distortoblotto]

Tom, another word of Thanks. Divo #1 up and vaping like a boss. Most excellent job as well.

 

[beckdg]

Most m2.5 grubs use the same .090 wrench. Why the issue? Authentic odin uses SAE hardware.

Correct me if I'm wrong. I believe this is in reference to this post...

Oh no! Not sure I want one if it's not metric. Please let me know when you get them in.

I have standardized on a 1.5mm hex driver for all my atty post screws. For a 2mm thread I use cap heads, 2.5mm gets button heads and 3mm gets grub screws.

One driver for all recoiling makes life a lot easier behind the wheel of a big rig when pressed for time and storage space constantly.

 

[MsLoud]

Divos arrived Tom!! LOVE them! Thank you so much for everything you do

 

[muzichead]

I received my Black Odin today and coiled it up and am quite happy with it so far. Really diggin' the look...

 

[phibbus]

Yikes, I didn't realize the Reactor's was that tiny when I first looked at it. Only one is drilled through on mine, though.

Scratch that. Both holes are fully drilled. Had a small piece of debris caught in one, so the light wasn't coming through.

 

[Chowderhead1972]

Correct me if I'm wrong. I believe this is in reference to this post...



I have standardized on a 1.5mm hex driver for all my atty post screws. For a 2mm thread I use cap heads, 2.5mm gets button heads and 3mm gets grub screws.

One driver for all recoiling makes life a lot easier behind the wheel of a big rig when pressed for time and storage space constantly.

If it's that big of a deal to you I will re-Tap them to the closest metric size just make a note I have taps for m2, m2.5, m3, and m4 suffice to say I have you covered. I also have grubs in those sizes as well. I might do the same on mine actually

 

[muzichead]

Here's the family pic...