Catfish atty mods.

Status
Not open for further replies.

Rossum

Eleutheromaniac
Supporting Member
ECF Veteran
Verified Member
Dec 14, 2013
16,081
105,232
SE PA
Oh. My. God.
That is Pure genius.
It was inspired when the mod in question leapt out of my shirt pocket onto a tile floor. This bent the lower battery contact enough that the mod wouldn't fire (but there was no other damage). I was a bit frustrated at that point because I didn't have the hex key needed to take the mod apart with me. :D
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
Dag nab it!

Any way to fit a center post from other atties to finish the bf conversion?


Sent from my iPhone using Tapatalk

Probably but I can send them back or sell them cheap. I will find plumes is SS although I have been using a brass centered Zenith for over a month and I have yet to grow a tail or see any oxidation or discoloration yet. I will be using the plume that I drilled for personal consumption until the CLT's come. Awesome atty btw.
 

pennysmalls

Squonkmeister
ECF Veteran
Verified Member
Jul 26, 2013
3,138
8,472
53
Indiana
*****SS Magma's are in also $48 shipped.
"DIBS" List
1. X-Puppy
2. Nugget40
3. Beckdg
4. rasci2
5. pennysmalls
6.
These will be drilled today and shipped tomorrow

I'll hold off on the plumviel for now and take a magma instead. I'll wait and see if you find some that will work out better. So that will be two atties for me with the Cyclone that MsLoud let me take. I'm not sure how you're payment process works chowder?
 

beckdg

ECF Guru
ECF Veteran
Verified Member
Oct 1, 2013
11,018
35,706
TN
******* Plume veil is a bust for now*******

Apparently there are a bunch of versions of the clone already. The one I got has a brass center post. If you want one any way I will sell them drilled and ready for $25 shipped first class or I will send them back. The Magma's came out fine. I will be doing a run of Infinite CLT's very soon. Hildecat sent me one to mod and other than the copper screw in the 510 (that I will be replacing) it is awesome. Similar concept to the plume minus the lower holes.

i will take a CLT, most definitely! will be running coast to coast, so if it's soon please make sure i'm in on the dibs list. please, please, please.

same with the plume veil once you find a SS version.
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
*****SS Magma's are in also $48 shipped.
"DIBS" List
1. X-Puppy paid shipped
2. Nugget40 on the lamb
3. Beckdg paid shipped
4. rasci2 paid shipped
5. pennysmalls paid shipped
6. Tangerov. Paid shipped
These will be drilled today and shipped tomorrow

Does anyone know Nugget40? He put up a dibs and fell off the planet... I have sent pm's to no avail. I will release the last SS Magma of the week for sale tomorrow.

The other five just shipped. If you want tracking info pm me your zip code and I will send it to you...

********Divos are out for delivery*******

Looks like the infinite Plume and CLT are going to be a go... Ordering 15 of each, I have a way with distributors.

I also have 10 cyclone/afc sets on the way... Shipped from California today. Still no afc caps though. Working on it.
 
Last edited:

Nautilusfan

Vaping Master
ECF Veteran
Verified Member
Fine fine fine.... I'll submit to all the peer pressure.
Innen-sechskant-schraubendreher ordered.

At that price I can't pass up ordering 2 of them.
You'll really like it. Makes life a lot easier! Especially for older eyes like mine :D
 

X-Puppy

Cloud Hound!
ECF Veteran
Verified Member
Sep 13, 2013
2,262
12,612
Marysville, Washington, USA
Probably but I can send them back or sell them cheap. I will find plumes is SS although I have been using a brass centered Zenith for over a month and I have yet to grow a tail or see any oxidation or discoloration yet. I will be using the plume that I drilled for personal consumption until the CLT's come. Awesome atty btw.

Dibs on a brass post Plumeviel. One of my favorite mods has a brass juice post and I haven't grown a tail either. Do you pickle them or should I do that when I get it?
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
Dibs on a brass post Plumeviel. One of my favorite mods has a brass juice post and I haven't grown a tail either. Do you pickle them or should I do that when I get it?


We don't need no stinking pickles..... Please send me a GOOD clone and I will hook it up. These are not good clones. Don't waste the money. I have decided that these are going back, I love you guys and I can't take your money for this crap... I just don't want my name or Catfish attached to these things.
 

Kentastic

Not Batman
ECF Veteran
Verified Member
Dec 30, 2013
1,878
10,303
Central Californication
Ok, so I'm a little lost. The Divo list looks full and Chowder took away Mama's Divo for himself (joke) and is sending out the others I'm assuming from the first order. I'm first on the second (and last available) Divo order. What is the status on those? I also assume a Divo is not on the way to me even though Chowder has my address.... I assume this because I haven't done paid fur it yet.

Also it looks like Black Magma's are out, SS Magmas are sold out, Cyclones are out. So what is left in the works? Or is this a good time for a break?

Oh I'm also incredibly slow.... I just got the whole Catfish name thing. LOL in my defense I've been very busy with work/home chit since Chowder officially opened for business. Hell I'm 500 miles away from home right now due to work and have had very little sleep.... maybe that's why my brain latched onto to the name of this thread when looking for bottom feeders... :p

Kentired in San Diego
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
Mine came too.
I paid $9, but had to reach $35 for free shipping anyway...
:D
hex_zps90378139.jpg




HA. My hex key for my cyclone is here!

7c913dbf5c4b864918a5a22b1c032371.jpg


7d7d724766e6b1a4fbc02308ea315406.jpg


In case anyone needs one for the cyclones picked up from chowder. Got it from amazon for 7.24 shipped from KC Tool. Now THIS, I can't possibly lose.


Burping out loud using Tapatalk
 

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
Ok, so I'm a little lost. The Divo list looks full and Chowder took away Mama's Divo for himself (joke) and is sending out the others I'm assuming from the first order. I'm first on the second (and last available) Divo order. What is the status on those? I also assume a Divo is not on the way to me even though Chowder has my address.... I assume this because I haven't done paid fur it yet.

Also it looks like Black Magma's are out, SS Magmas are sold out, Cyclones are out. So what is left in the works? Or is this a good time for a break?

Oh I'm also incredibly slow.... I just got the whole Catfish name thing. LOL in my defense I've been very busy with work/home chit since Chowder officially opened for business. Hell I'm 500 miles away from home right now due to work and have had very little sleep.... maybe that's why my brain latched onto to the name of this thread when looking for bottom feeders... :p

Kentired in San Diego

Ok... I guess this has become a little hard to follow at this point.

*********Current status**********

Black Magma's are sold out, considering ordering more, let me know if you are interested.

SS Magma's 4 of 6 sold 2 more spoken for but no contact so far. I have 8 more on the way late next week hopefully.

Zenithv2 6 on the way same order to arrive late next week none spoken for officially yet.

Divo first 10 gone. Second batch of six currently in New Jersey, may be delivered today, if so will be ready tonight. You are on the list.

Plumeveil have 8 in stock with 6 more on the way, all going back due to poor quality. I have found great plumes, from infinite, hopefully I will have 15 coming very soon. (Trying to order direct from infinite, made contact, waiting to hear back again)

Infinite CLT I'm trying to order 15 on the same order as the infinite plumes. Very nice atty! (Thanks for the intro Hildecat)

Cyclone/afc SS 2014 10 on the way will be here early next week, none spoken for yet.

EHPRO Atomics 5 in stock ready to go

Quasar all ss deck, brass cap 2 available ready to go

Madz Modz Reactor v2 sold out hunting for more; tips on who has them are welcomed, trying to contact them directly has failed.

I'm not in a holding pattern, very much active but I'm trying to follow what you guys are looking for but selling out quickly if you have attys that you are looking for or suggestions I'm all ears. I was out last week but I did have orders coming from all over the world. As those orders continue to trickle in I will make them available to you via this forum and "Dibs lists". Check back frequently..
 
Last edited:

Chowderhead1972

Unregistered Supplier
ECF Veteran
Feb 19, 2013
9,112
31,913
Clarksburg, Maryland, United States
I would Love to dibs plus pay for a CLT and a zenith! I can haz do it now. :D


Burping out loud using Tapatalk

The MOQ is 20 on the Infinite CLT and the Infinite Plumeveil each both of very high quality, I need to gauge interest before committing to the CLT in those numbers.

Or

Infinite CLT dibs list:
1.
2.
3.
4.
5.
6.
7.
8.

How about the Infinite all stainless no gold plating Plumeveil?

1.
2.
3.
4.
5.
6.
7.
8.

My plan is to keep these in line with my current price range of $40-$50 shipped but I need to know these will sell. I'm convinced these are great attys but are you? These will become my new flagship attys along with the Magma and Cyclone.
 
Last edited:

TheKiwi

Vaping Master
ECF Veteran
Verified Member
Dec 2, 2013
7,548
18,586
Durham, North Carolina, United States
The MOQ is 20 on the Infinite CLT and the Infinite Plumeveil each both of very high quality, I need to gauge interest before committing to the CLT in those numbers.

Or

Infinite CLT dibs list:
1. TheKiwi
2.
3.
4.
5.
6.
7.
8.

How about the Infinite all stainless no gold plating Plumeveil?

1.
2.
3.
4.
5.
6.
7.
8.

My plan is to keep these in line with my current price range of $40-$50 shipped but I need to know these will sell. I'm convinced these are great attys but are you? These will become my new flagship attys along with the Magma and Cyclone.



Burping out loud using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread