I wish I could put my hands on either one of those two right now. The Divo is a long shot, the Cyclones will be back eventually.
Catfish atty mods.
- Thread starter Chowderhead1972
- Start date
- th_trl_thread_readers 0
- Status
Yes seems like logic of a sortWhat attys does Chowderhead have that are not for LP exclusively?
That's a great question... What's out there? I'm up for supporting the high top fellas.. I believe there is igo that is all stainless that would work.. I did one for Kentastic and a few for Mama Tried, maybe they will post the details.
Got the Divo in a day early and the flavor on it is outstanding! Thanks Chowder. I might open the airflow up a bit but I'll give it a couple days before I decide.
An IGO-S is my current favorite, been using them for 6months. It fits on the Grand, newer Woodvils, mini 2.1, and obviously LP's
Very minimal chamber, thick vapor at .8-.5 single builds. 2 post single coil design, all SS and the post are really close together for those tight micros without a lotta "leg". Best flavor of the atty's I've used, (RM2, atomic, igo-w and s ,A7's)
Very minimal chamber, thick vapor at .8-.5 single builds. 2 post single coil design, all SS and the post are really close together for those tight micros without a lotta "leg". Best flavor of the atty's I've used, (RM2, atomic, igo-w and s ,A7's)
I'm curious why not much is said about a BF converted IGO-T ... they're lightweight and enough room for dual coils.
Smaller than an Odin so they fit a LP REO without a big obvious hangover and don't make it top heavy.
Smaller than an Odin so they fit a LP REO without a big obvious hangover and don't make it top heavy.
It seems to me like the Igo S are a little hard to find as well. There is also the A7 and A7 mini (FT has the minis) although both of these use the center post for airflow. Maybe if you drilled an air hole into the top cap they would work better.
Also my Divo came today. Took me a couple tries to set it up because I kept over tightening but otherwise build wasn't bad. I can't really vape it right now because I am sick as hell at the moment.
Also my Divo came today. Took me a couple tries to set it up because I kept over tightening but otherwise build wasn't bad. I can't really vape it right now because I am sick as hell at the moment.
I would like another one of these please Chowderhead1972. Or if anyone who bought one decides they do not want theirs I'll buy it from you. PM me.
It's a Vicious Ant Chaplin drip tip... or a clone of one. I have one authentic and about three clones. Can't tell if it's real or Maybelline.
Not trying to step on Tom's toes here, but Rob has the Igo-S BF in stock and ready to ship anytime... http://www.reosmods.com/index.php?p...category_id=32&option=com_virtuemart&Itemid=3
you left me off
That's what I get for spamming Chowder's thread.
-------
Infinite CLT dibs list: I'm pricing these at $49 shipped first class w/tracking 304ss hardware on order to make these awesome.
1. TheKiwi
2. beckdg
3. Rasci2
4. Stvan1
5. Freedogg
6. jmhenckel81
7. X-Puppy
8. Texaslimo
9.
10..
11.
12.
13.
How about the Infinite all stainless no gold plating Plumeveil? Pricing these at $46 shipped First Class w/tracking.
1. beckdg
2. Walter Ego
3. X-Puppy
4. Borescoped
5. mk13
6. AalWani
7.Caveat
8.
9.
10.
11.
12.
13.
My plan is to keep these in line with my current price range of $40-$50 shipped but I need to know these will sell. I'm convinced these are great attys but are you? These will become my new flagship attys along with the Magma and Cyclone.
Magma list $48 shipped first class w/tracking
Magma SS next list:
1. Texaslimo
2.stvan1
3. oldmerc
4.
5.
6.
7.
8.
(Updated) ***Announcing the VA Cyclone (2013) with afc SS attys. I think $105 plus your choice of shipping is fair. +$3 for First class w/tracking or +$6 for priority. As always shipping is by the box not the atty.
1. mikepetro (1st class) phillips
2. TyCreek
3. TyCreek
4. Caveat (with phillips)
5. AalWani
6. motabrownie
7. Brenetics(priority)
8.
9.
10.
Just to get it all out there I have 6 Zeniths coming in with the Magma order, $45 shipped first class w/tracking
1.
2. TheKiwi
3.
4.
5.
6.
Buy 2 free shipping attys and you will automatically upgrade to priority.
Orders to Canada will have a $20 shipping charge, not my choice... My actual cost is about $21 to Canada.
Added myself to the Cyclone list
Sent from my iPad using Tapatalk
Last edited:
No smashed toes here... I'm looking for a source of IGO-T s that I can muscle for a price we can all be happy with. IGO-S I will leave to Rob.
I spoke to Rob for over an hour yesterday in regards to attys, paypal, Reos in general, and the new 510 connection that he promises is bulletproof. I can't wait for the new 510. I get a lot of PMs of from you guys about connectivity issues and almost all if not all of them are a result of a 510 that has been pushed in to far with previous attys. Some attys have longer 510's than others; the Magma clone and the RM2 are the longest I know of. If screwd in too deep it will work fine until you try an atty with a shorter connector. The shorter connector will either not connect at all or make an intermittent connection more commonly. The intermittent connection will allow your coils to heat up but the heat will come on slow and will result in an inconsistent vape. The good news is Rob will fix them for a very fair price ranging from $10 to just rebuild the 510 on an otherwise new Reo to $30 for a full rebuild including bottle, tube, all contacts etc.
Igo s replaced my Rm2 on the Reo. Fun little fella. I still haven't tried anything other than those 2 on a BF. So I'm excited about the plumeveil. I see an LP in my near future.
Spotted this on that Fog Frog site.
Anyone tried this little thing? Orieco Torch.
Looks like it's tiny enuf for a std. REO.
Frogger 16.99
Made-in-China $7/ea for 20
One guy has one
Anyone tried this little thing? Orieco Torch.
Looks like it's tiny enuf for a std. REO.
Frogger 16.99
Made-in-China $7/ea for 20
One guy has one
I got two of these on my desk right now they will not fit a Standard Grand Looks to be 22ml or there abouts.
Spotted this on that Fog Frog site.
Anyone tried this little thing? Orieco Torch.
Looks like it's tiny enuf for a std. REO.
Frogger 16.99
Made-in-China $7/ea for 20
One guy has one
LOL me too.
Real, fake no logo, fake with logo.
I think...
Dang, those need a cleaning. I use them a lot...
Real, fake no logo, fake with logo.
I think...
Dang, those need a cleaning. I use them a lot...
Yo chowder keep us posted on the new 510!
I'm excited about that. Although that means I needa send my REO back.... Uh oh. Separation anxiety
I'm excited about that. Although that means I needa send my REO back.... Uh oh. Separation anxiety
huh. It looked so small in pictures, lol.
Actually now I see one of the sites says it's 20. Not sure I'd trust that...
Are you using them? Are they good? Just curious, and my REO's LP.
Actually now I see one of the sites says it's 20. Not sure I'd trust that...
Are you using them? Are they good? Just curious, and my REO's LP.
I have not had the chance to use it yet or mod it to BF but will set it up as a dripper over the weekend and let you know how its works out.
Small chamber but the air flow is kind of strange off center from the posts and has a 4 different options for air flow. You have to place the coil near the air flow you would like to use. Strangest atty I have found yet. Hope it works.
Small chamber but the air flow is kind of strange off center from the posts and has a 4 different options for air flow. You have to place the coil near the air flow you would like to use. Strangest atty I have found yet. Hope it works.
Last edited:
- Status
