Catfish atty mods.

[element77]

Infinite CLT dibs list: I'm pricing these at $49 shipped first class w/tracking 304ss hardware on order to make these awesome.

1. TheKiwi
2. beckdg
3. Rasci2
4. Stvan1
5. Freedogg
6. jmhenckel81
7. X-Puppy
8. Texaslimo
9. Brookj1986
10..
11.
12.
13.
How about the Infinite all stainless no gold plating Plumeveil? Pricing these at $46 shipped First Class w/tracking.

1. beckdg
2. Walter Ego
3. X-Puppy
4. Borescoped
5. mk13
6. AalWani
7.Caveat
8. Brookj1986
9.
10.
11.
12.
13.
My plan is to keep these in line with my current price range of $40-$50 shipped but I need to know these will sell. I'm convinced these are great attys but are you? These will become my new flagship attys along with the Magma and Cyclone.


Magma list $48 shipped first class w/tracking
Magma SS next list:
1. Texaslimo
2.stvan1
3. oldmerc
4. Reserved. (guest)
5.
6.
7.
8.

(Updated) ***Announcing the VA Cyclone (2013) with afc SS attys. I think $105 plus your choice of shipping is fair. +$3 for First class w/tracking or +$6 for priority. As always shipping is by the box not the atty.
1. mikepetro (1st class) phillips
2. TyCreek
3. TyCreek
4. Caveat (with phillips)
5. AalWani
6. motabrownie
7.
8.
9.
10.

Just to get it all out there I have 6 Zeniths coming in with the Magma order, $45 shipped first class w/tracking
1.Element77
2. TheKiwi
3. Brookj1986
4.
5.
6.

buy 2 free shipping attys and you will automatically upgrade to priority.
Orders to Canada will have a $20 shipping charge, not my choice... My actual cost is about $21 to Canada.

 

[Rossum]

Hyuk. I have a mint non AFC top cap I got when I bought my cyclone from chowder. Might bust that baby out one day. It's definitely the smallest top cap I've ever seen on an atty.

The only problem is that the stock airhole is SO tiny and I have no means of drilling it out. Face palm

The standard Cyclone cap is quite thin. I don't drill them. I ream them a bit with the awl/reamer on a Swiss Army knife. This lets you increase the hole size progressively until you get it where you like it. IMO, this is the best approach for people who prefer a relatively tight draw like I do. However, it's probably not the best approach for people who like lung hits and the wide open airflow that requires.

 

[beckdg]

I'm shocked that there's no interest in the zenith v2. Really? I mean what's there not to like. Delrin drip tip holder. Wide post slots. Airflow control for tight to cloud chasing size. Excellent flavor.

I'm stumped.

I would but I have 2 authentic 2.5s and a 2.0 clone already.

 

[freedogg]

Tom you should have received my Atomic to mod.

I'm also on the CLT list.

Could you OR anyone else please put me on the Plumeveil list.

Thanx!!

 

[Chowderhead1972]

I'm shocked that there's no interest in the zenith v2. Really? I mean what's there not to like. Delrin drip tip holder. Wide post slots. Airflow control for tight to cloud chasing size. Excellent flavor.

I'm stumped.

Agreed! The Zenith is my daily driver. Easy to clean, easy to coil, easy to re-wick, 9/10 flavor. Only downside is it's polished and plain looking. I'm keeping 1 of the six for my other Reos.

 

[Chowderhead1972]

Tom you should have received my Atomic to mod.

I'm also on the CLT list.

Could you OR anyone else please put me on the Plumeveil list.

Thanx!!

So your the one..... It arrived yesterday but I was swamped with attys. I will do it today now that I know who it belongs to. Payment info on the way....

 

[Chowderhead1972]

Infinite CLT dibs list: I'm pricing these at $49 shipped first class w/tracking 304ss hardware on order to make these awesome.

1. TheKiwi
2. beckdg
3. Rasci2
4. Stvan1
5. Freedogg
6. jmhenckel81
7. X-Puppy
8. Texaslimo
9. Brookj1986
10..
11.
12.
13.
How about the Infinite all stainless no gold plating Plumeveil? Pricing these at $46 shipped First Class w/tracking.

1. beckdg
2. Walter Ego
3. X-Puppy
4. Borescoped
5. mk13
6. AalWani
7.Caveat
8. Brookj1986
9. Freedogg
10.
11.
12.
13.
My plan is to keep these in line with my current price range of $40-$50 shipped but I need to know these will sell. I'm convinced these are great attys but are you? These will become my new flagship attys along with the Magma and Cyclone.


Magma list $48 shipped first class w/tracking
Magma SS next list:
1. Texaslimo
2.stvan1
3. oldmerc
4. Reserved. (guest)
5.
6.
7.
8.

(Updated) ***Announcing the VA Cyclone (2013) with afc SS attys. I think $105 plus your choice of shipping is fair. +$3 for First class w/tracking or +$6 for priority. As always shipping is by the box not the atty.
1. mikepetro (1st class) phillips
2. TyCreek
3. TyCreek
4. Caveat (with phillips)
5. AalWani
6. motabrownie
7.
8.
9.
10. Destroyed, afc cap SPF to mother natural.

Just to get it all out there I have 6 Zeniths coming in with the Magma order, $45 shipped first class w/tracking
1.Element77
2. TheKiwi
3. Brookj1986
4.
5.
6. Chowderhead1972

Buy 2 free shipping attys and you will automatically upgrade to priority.
Orders to Canada will have a $20 shipping charge, not my choice... My actual cost is about $21 to Canada.

 

[Chowderhead1972]

Tom you should have received my Atomic to mod.

I'm also on the CLT list.

Could you OR anyone else please put me on the Plumeveil list.

Thanx!!

Done, thanks....

 

[Chowderhead1972]

*********To all on the the Dibs list: ********

Please pm me for payment info today is the day....

 

[Walter Ego]

*********To all on the the Dibs list: ********

Please pm me for payment info today is the day....

Woo Hoo

 

[freedogg]

Thanx Tom!!

PayPal sent.

So your the one..... It arrived yesterday but I was swamped with attys. I will do it today now that I know who it belongs to. Payment info on the way....

 

[jakematic]

Hyuk. I have a mint non AFC top cap I got when I bought my cyclone from chowder. Might bust that baby out one day. It's definitely the smallest top cap I've ever seen on an atty.

The only problem is that the stock airhole is SO tiny and I have no means of drilling it out. Face palm

Easy peasy.

Use a hex shank drill but, put it in a hand driver, and take your time.
Once it sounds 'scratchy' it's about to break through the thin metal to the other side.

That's what I've done with 4 of mine and it works very well - take less than 5 minutes including rat-tail filing the interior.
At 1/16" I can do nice full lung hits

 

[beckdg]

*********To all on the the Dibs list: ********

Please pm me for payment info today is the day....

Just sent Da monies. I haz'd ur Addy already.

Thanks tom.

 

[mikepetro]

Payment sent, and addy PM sent.

Thanks........

 

[TheKiwi]

Payment sent!!!

NOW GIMME MAH ATTIES! Hehe

 

[brookj1986]

PM and payment launched in your direction.

Looking forward to the priority upgrade ... will help with my impatience.

Sent from my Galaxy Note 3 via Tapatalk.

 

[Chowderhead1972]

I will update who has paid and otherwise tonight at work.. You guys have made it rain..... Everything will ship Monday when the post office opens. Sending tracking info will be Monday. I hope you guy love the CLT and Plume, I'm pretty sure no one else is going to go through the aggravation, they were the most time consuming attys to date that I have done. All cyclones including this batch will come with the standard Allen's installed and (3) Phillips replacement screws in the bag. I love you guys and I love my Hudy drivers but I understand that not everyone enjoys the tiny Allens. My way of saying thanks.

Again a huge thanks to everyone that made this possible!! You guys are awesome!

 

[Chowderhead1972]

I'm not much for advertising juice but I just tried Cuttwood Unicorn Milk and it is honestly the best juice I have ever had bar none. Try a 15ml it will change your life. I have never been a Juice fanboy before but I think I am now. I love their marketing as well, the only sell three juices in two sizes. 15ml and 120ml. Sample or all in your choice.. Genius!

I Will accept 120ml bottles@18mg as payment.

 

[BobC]

Easy peasy.

Use a hex shank drill but, put it in a hand driver, and take your time.
Once it sounds 'scratchy' it's about to break through the thin metal to the other side.

That's what I've done with 4 of mine and it works very well - take less than 5 minutes including rat-tail filing the interior.
At 1/16" I can do nice full lung hits

That's what I use when I'm lazy, but I do it by hand

 

[BobC]

I'm not much for advertising juice but I just tried Cuttwood Unicorn Milk and it is honestly the best juice I have ever had bar none. Try a 15ml it will change your life. I have never been a Juice fanboy before but I think I am now. I love their marketing as well, the only sell three juices in two sizes. 15ml and 120ml. Sample or all in your choice.. Genius!

I Will accept 120ml bottles@18mg as payment.

If I don't make it myself, I don't vape it,
DO you know where that juice was before you put it in your mouth?