CE2 Clearomizers & Totally Wicked E-Liquid Review

[Huuwap]

Unfortunately I can't say I had much in the way of a good experience with either the CE2s or TW. I really wanted to like the CE2s, I've been pondering purchasing them for quite a while, but they're just not for me.

I don't think I mentioned it in the video, but the liquids I used in the video are all 60% or more PG.



Thanks for watching!

 

[VapingMattCA]

With the CE-2s you need to remove the cup seal and then use the top black o-ring with totally level side facing the toward the mouth piece end of the tube in place of it. This will solve the wicking issue you are having. All I use is CE-2s and love them. Gotvapes (GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more) will have a new CE-2 Fluxo Supreme which has a completely different easy fill seal in a week or 2. CE-2s with that rubber seal over the cup are terrible as it doesn't allow enough juice to make it to the coil.

 

[Huuwap]

Do you have a good way to remove the cup seal? I tried that a few days ago and couldn't get it to budge.

 

[VapingMattCA]

I use a small screwdriver that comes with those kits used to tighten screws on glasses. I pry up all the way around with the exception of where the wicks are. You can also bend the tip of a paper click so it has a 90 degree bend on 1 end.

 

[Nomoreash]

I use a paperclip that I've bent at one end to a L or slight hook shape. Work that bend under the center of the seal and pull slightly, don't do it all at once the first time or it might rip. Just work your way around the seal pulling up gently each time and it'll work loose.

After you remove it once it's much easier if you want to put it back in for some reason and remove it again, although I just toss em. From the factory the seem to be slightly stuck to the tube which is why you have to work your way around the seal to loosen it up.

 

[Huuwap]

I did manage to force one of these little cup things out, but I don't see any way to keep it out. It seems like it needs to be in there or juice is going to flow right down the air hole.