Check atomizer help

[Noraj1067]

One of my Atlantis tanks sometimes says check atomizer on my Hanna clone. The coil is only a day old. I've checked the bottom pin and it looks the same as my other tank. It so,strikes creates vapor but it's much less than usual. Otherwise it says check atty. Amy ideas as to whats going on?

also the coil life I'm getting is seriously wrong. I'm only getting two days out of a coil if I'm lucky. Im vaping at 27 watts, all quality Julie in mostly 50/50. I prime it before using, and line the holes up correctly. I've gone through multiple boxes from multiple vendors. I don't understand what I'm doing wrong =(

 

[smacksy]

One of my Atlantis tanks sometimes says check atomizer on my Hanna clone. The coil is only a day old. I've checked the bottom pin and it looks the same as my other tank. It so,strikes creates vapor but it's much less than usual. Otherwise it says check atty. Amy ideas as to whats going on?

also the coil life I'm getting is seriously wrong. I'm only getting two days out of a coil if I'm lucky. Im vaping at 27 watts, all quality Julie in mostly 50/50. I prime it before using, and line the holes up correctly. I've gone through multiple boxes from multiple vendors. I don't understand what I'm doing wrong =(

Hana clone isn't the best mod to be trying to vape the Atlantis. Try another mod as see if you have the same problem..if the problem disappears you will know it's your mod and not the Atlantis..[emoji4]

Sent from my DROID RAZR HD using Tapatalk

 

[BOX MOD LYFE]

From what I have heard, the pin at the bottom of the Atlantis has a habit of getting pushed up. It would stop working if it did and probably say check atomizer. Yours could be just on the verge of being pushed to far in, which would be why it sometimes works. As for your coils, make sure to thoroughly wet them before using them. You can drip enough drops directly into the coil before reassembling or just give it 30 min after you put it back together.

 

[HecticEnergy]

What ohm coil are you using in your atlantis?

 

[Noraj1067]

The Atlantis stock coils are 0.5 ohms

 

[smacksy]

Stock Atlantis coil says .5 ohms but I put a box of 5 brand new coils on the ohm meter for testing..they ranged from a low of .55 to a high of .61..not one out of 5 was at the advertised spec of .5 ohms...no big deal really... I simply bump the wattage for my desired sweet spot anyway, judging by how it vapes..usually between 35-40w using these coils... Also if the coil isn't tightened down in the base the pin might not protrude long enough to make solid contact on the mod..
You can see in the pic how far my pin protrudes to ensue good contact whether I'm running it on a mech or on my IPV3...works great first time, every time, and coils are lasting an average of a little over a month vaping it everyday.. [emoji39]

Sent from my DROID RAZR HD using Tapatalk