[CLOSED]

Status
Not open for further replies.

Downtownjeffbrown

Vaping Master
ECF Veteran
Verified Member
Nov 17, 2013
3,563
14,826
Northwest Indiana
+1

It's a matter of sustained amps, 1.2Ω is my preference using AW '490s ;)

However they are rated at 15C, higher than I realized :blink:

I use the same batteries and never go lower than 1.0-0.8 ohms but thank u for your guys concern I try to be as careful as I can be.

I also have some efests but have AW also. If there are better 14500 batteries out there I can't find them :(

>^.^< Sent From Meow G2
 
Last edited:

Uno mas

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Jan 5, 2013
9,199
30,440
San Antonio, TX
I use the same batteries and never go lower than 1.0-0.8 ohms but thank u for your guys concern I try to be as careful as I can be.

I also have some efests but have AW also. If there are better 14500 batteries out there I can't find them :(

>^.^< Sent From Meow G2

The 15C was for the AW 18490s, would have to look up the 14500s, little light on options I believe, I do have the protected AW's for my better half's ProVape and keep the builds between 1.6 - 1.8...
 

classwife

Admin
Admin
Supporting Member
ECF Veteran
Verified Member
May 9, 2010
98,582
161,123
69
Wesley Chapel, Florida
I was wondering why this thread hasn't been locked in a while. Thanks for the order btw!


laughing-emoticon.jpg




HAaaaaaaaaaaaaaaHAHAHAHAHAAAAAaaaaa !!!!!!
 

Downtownjeffbrown

Vaping Master
ECF Veteran
Verified Member
Nov 17, 2013
3,563
14,826
Northwest Indiana
Just checked the AW IMR 14500 3.7 V 600mAh battery...
Max. continuous discharge rate : 4A

You are right at max discharge, please be careful :)

What about the Efest 700mah 3.7? I've got 4 of those and 2 AW

How would I check the efest?

>^.^< Sent From Meow G2
 

Cob24

Ultra Member
ECF Veteran
Verified Member
Nov 18, 2013
2,149
5,277
A place some call paradise
I've got a mini 2.1 no sub ohm kit. I keep my coil right around .85ohms. I use the aw-imr batteries.

I've got a new sl/lp grand sitting here staring at me waiting on batteries. I've got two 18650 aw-imr batteries coming tomorrow (the lower mah version). The coil I've got on my new lp rm is at .725.
Any concerns I should have on either of those? Since y'all are doing research?
 

Uno mas

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Jan 5, 2013
9,199
30,440
San Antonio, TX
I've got a mini 2.1 no sub ohm kit. I keep my coil right around .85ohms. I use the aw-imr batteries.

I've got a new sl/lp grand sitting here staring at me waiting on batteries. I've got two 18650 aw-imr batteries coming tomorrow (the lower mah version). The coil I've got on my new lp rm is at .725.
Any concerns I should have on either of those? Since y'all are doing research?

.725Ω would draw 5.379 amps at 3.9v... Nuthin' to be concerned about ;)

If you are interested here's a calculator to figure your numbers...
 
Last edited:

Uno mas

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Jan 5, 2013
9,199
30,440
San Antonio, TX
So what was so concerning about my coils at .8 to 1.0ohms?

>^.^< Sent From Meow G2

Different batteries, Cob was discussing the 18490 and 18650, if I understood correctly you were talking about 14500s ? Huge difference in amp output...
 

Downtownjeffbrown

Vaping Master
ECF Veteran
Verified Member
Nov 17, 2013
3,563
14,826
Northwest Indiana
Different batteries, Cob was discussing the 18490 and 18650, if I understood correctly you were talking about 14500s ? Huge difference in amp output...

Ah he has a mini 2.1 OK

Wish I could use these bad boys in my mini reo lol ;)
a7ate3y6.jpg


>^.^< Sent From Meow G2
 

Cob24

Ultra Member
ECF Veteran
Verified Member
Nov 18, 2013
2,149
5,277
A place some call paradise
He's quite punctual with his shipping.
You are gonna love it though. Welcome to the crew

I just received 4 new 18650 batteries. Two for my nemesis and two for my lp/sl grand. I tell you these things can't charge fast enough. I wanna try my new toys. I've already got the coils built on my kayfun and reomizer.
 
Status
Not open for further replies.

Users who are viewing this thread