[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Keep looking, I'll buy a few hundred no prob but I want to but a small amount, one if possible, to make sure the threads are the same and the bottles are ok, I realize they are probably all from China but I want to check them out before I get a bunch of them, the 15ml black ones I got seem to be a little softer than the clear ones. I didn't like them at first but now I like them a lot. But the point is they could be different and I don't want 500 if I'm not gonna use em ya know. There's gotta be someone in the stated that has some, jm wouldn't sell me any, haha.
Hello everyone took me awhile to read through most all 101 pages here. Looks like I found a GOOD bunch of people here and a KILLER mod so let me ask a few questions please. First, does the 26650 run off a single 26650 battery with any kind of top, button, flat.After using probably one of the best built mods out there IMO (tested to my standards) it is nice to have rebuild kits, are they available and the cost. On the 26650 is there room for center pins (someone else had asked this) which would make top and bottom align and give better stability. And last the cost. Thanks for your time all!
Hey Swamper, thanks for reading the thread. I should have written in there that anyone can email me any questions they have if they don't want to swim thru the whole thread. .. I completely understand.
To answer your questions, you can use any battery you want, it's a single 26650. The 26650 holds a 15ml bottle. The only wear item on the device is the insulator in the (adjustable ) 510. I have had two people mess their up, I don't expect you'll be able to hurt that, or any other part on the mod, but if you do I'll send you a replacement for free. That's pretty much how I run the warranty system around here. If you break it I want to know how, so we all get to laugh at you, then I'll send you a new one, no costs.
I've also had people have trouble with their mods with the buttons becoming hard to press. This is due to the contacts being dirty. You don't have to take good care of these mods, but if it does stop working it's not broken, it's just dirty. It takes about three months of not cleaning to become noticeable.
To answer your questions, you can use any battery you want, it's a single 26650. The 26650 holds a 15ml bottle. The only wear item on the device is the insulator in the (adjustable ) 510. I have had two people mess their up, I don't expect you'll be able to hurt that, or any other part on the mod, but if you do I'll send you a replacement for free. That's pretty much how I run the warranty system around here. If you break it I want to know how, so we all get to laugh at you, then I'll send you a new one, no costs.
I've also had people have trouble with their mods with the buttons becoming hard to press. This is due to the contacts being dirty. You don't have to take good care of these mods, but if it does stop working it's not broken, it's just dirty. It takes about three months of not cleaning to become noticeable.
There is no reason to add pins/dowels for alignment. A pin that fits into a hole will always have to be a loose fit; in order to allow it to come in and out. This loose fit will not help to align the cap, the screws are stronger than any pins and they hold the cap tighter for sure. That's the reason I don't use magnets. They just have too much slop, and they came apart if you do anything rude to them.
I just took your advice and lay'ed the mod on its side to align the top during assembly... And it works like a charm. Thanks for the tip.
(Don't know why I didn't think of that)
(Don't know why I didn't think of that)
Looks like they would work. Only problem is you have to buy a 1000 at a time
That helps me with the search, now that I know what you are looking for.
The bottles in the link I posted have needle tips.
Ask if they can send you one bottle for you to test to see if it will work for you. If the bottles will work, I would be willing to go in for 250 of them, to split that order up. I will keep looking though and see if I can find a lower quantity place to purchase from.
Just find a us vendor, that's the hot ticket, I don't want to have to deal with shipping from china.
Hey doffy, you want a copper button on the bronze mod right? Sorry I'm losing it a lil bit..
I tried to order by it was like twenty bucks for shipping, I'll see if they can do something about that, I just want to try one before I get a bunch...bug u don't want to pay forty bucks for shipping..
..good score.!
..good score.!
I'm having that one done specially for you bud!
Oh wow....looks like Tom had some sort of an "attack" [emoji15] LOL
Sent from my iPhone using Tapatalk with my paws
Mommabird62
Sent from my iPhone using Tapatalk with my paws
Mommabird62
Last edited:
- Status
Similar threads
