[CLOSED]

[super_X_drifter]

Been a tmod owner all of two weeks, and already knows it inside out

Sent from my GT-I9506 using Tapatalk

Yes, this is one mod that right off the bat I felt the urge (and comfort level) to disassemble the 510 assembly and put it back together. I haven't removed the insulator yet, but should it ever fail, I would attempt it. I hate to send mods away for anything. This mods firing mechanism, tube assembly and 510 adjustment is the simplest, yet most effective and burly I've ever had. It's pretty damn ingenious just how simple and effective it is.

But I regret to inform you that I will be sending my yellow back to get Reptiled and either blasted finish or snipered beforehand that reptile is calling my name and if I weren't leaving town Ida already sent it to get some scales

 

[inspects]

Yes, this is one mod that right off the bat I felt the urge (and comfort level) to disassemble the 510 assembly and put it back together. I haven't removed the insulator yet, but should it ever fail, I would attempt it. I hate to send mods away for anything. This mods firing mechanism, tube assembly and 510 adjustment is the simplest, yet most effective and burly I've ever had. It's pretty damn ingenious just how simple and effective it is.

But I regret to inform you that I will be sending my yellow back to get Reptiled and either blasted finish or snipered beforehand that reptile is calling my name and if I weren't leaving town Ida already sent it to get some scales

After seeing that Patina mod here....mine are heading to the paint shop...I asked Tom to send them unpainted....

 

[Tbev]

My goal was to build it to handle the lowest sub ohm builds no problem, all day long, while keeping it simple to work on so I could just send any parts that needed to be replaced, that's pretty much it. Nothing ever wears out it should last forever by just in case I can always pop a part in the mail and get ya back in the game. I didn't have much faith in the USPS so I wanted to deal with them as little as possible, I do have to say, besides done of the halfwits that work in the front office of the PO, I can't really complain.

 

[Doffy]

Yes, this is one mod that right off the bat I felt the urge (and comfort level) to disassemble the 510 assembly and put it back together. I haven't removed the insulator yet, but should it ever fail, I would attempt it. I hate to send mods away for anything. This mods firing mechanism, tube assembly and 510 adjustment is the simplest, yet most effective and burly I've ever had. It's pretty damn ingenious just how simple and effective it is.

But I regret to inform you that I will be sending my yellow back to get Reptiled and either blasted finish or snipered beforehand that reptile is calling my name and if I weren't leaving town Ida already sent it to get some scales

the blasted feels really nice in hand

i want a bright cerakote parallel tmod after this patina bronze. not sure what colour, but the yellow is tempting

 

[Doffy]

My goal was to build it to handle the lowest sub ohm builds no problem, all day long, while keeping it simple to work on so I could just send any parts that needed to be replaced, that's pretty much it. Nothing ever wears out it should last forever by just in case I can always pop a part in the mail and get ya back in the game. I didn't have much faith in the USPS so I wanted to deal with them as little as possible, I do have to say, besides done of the halfwits that work in the front office of the PO, I can't really complain.

my positive contacts on those other aluminium squonkers were always wearing out

my tmod with daily use doesn't have the slightest mark on it

 

[Tbev]

my positive contacts on those other aluminium squonkers were always wearing out

my tmod with daily use doesn't have the slightest mark on it

I hear that! I wouldn't recommend cleaning your contacts with sandpaper if they were mincy enough to wear out.. I know sandpaper seems a little overkill bit it works well and your not gonna hurt my contacts.


BTW..I just popped open a bottle of GUSH, it's gusher flavored juice and it's pretty kic kass, I reccomend it.

 

[Tbev]

Hey T, I just got the nichrome, much appreciated! I just threw a six wrap of 26ga. I normally do four or five wraps, it's great, significant difference, I'm a fan, thanks bud!

 

[super_X_drifter]

My goal was to build it to handle the lowest sub ohm builds no problem, all day long, while keeping it simple to work on so I could just send any parts that needed to be replaced, that's pretty much it. Nothing ever wears out it should last forever by just in case I can always pop a part in the mail and get ya back in the game. I didn't have much faith in the USPS so I wanted to deal with them as little as possible, I do have to say, besides done of the halfwits that work in the front office of the PO, I can't really complain.

I think you done nailed your goal bro. Bullseye . Nice shot man.

 

[MFToms59]

Hey T, I just got the nichrome, much appreciated! I just threw a six wrap of 26ga. I normally do four or five wraps, it's great, significant difference, I'm a fan, thanks bud!

My pleasure and happy to be of assistance.

 

[inswva]

Wondering if these bottles would work... hard to beat 50 bottles for $13.50. $8.50

Amazon.com : 10ML 50pcs Empty plastic dropper bottle/Dropping Bottles(Drops of plug can removable)plastic bottle Eye Liquid Dropper : Beauty

Vktech 10ml Dropper Bottles, Plastic, 50 Pcs: Amazon.com: Industrial & Scientific

And here's 50 needle tip bottles for $12.99

http://www.amazon.com/Density-Polye...=1434634443&sr=1-15&keywords=10ml+bottle+ldpe

 

[TheDigital99]

Wondering if these bottles would work... hard to beat 50 bottles for $13.50. $8.50

Amazon.com : 10ML 50pcs Empty plastic dropper bottle/Dropping Bottles(Drops of plug can removable)plastic bottle Eye Liquid Dropper : Beauty

Vktech 10ml Dropper Bottles, Plastic, 50 Pcs: Amazon.com: Industrial & Scientific

I bought those.. They fit and squonk... But they squonk hard, I have 1 in right now and I am abusing it to see if I can soften it up


Don't know why the forum lined through the link

 

[inswva]

I bought those.. They fit and squonk... But they squonk hard, I have 1 in right now and I am abusing it to see if I can soften it up


Don't know why the forum lined through the link

Forum didn't do that, I did, lol. And, I didn't realize that the links I provided are from Chinese vendors so shipping times may be an issue.

 

[TheDigital99]

Forum didn't do that, I did, lol. And, I didn't realize that the links I provided are from Chinese vendors so shipping times may be an issue.

Hmm.. maybe they are different bottles then, mine came from a US vendor....

I am digging through all my all vape stuff... I think I may have some 10 ml bottles in there

 

[super_X_drifter]

Wondering if these bottles would work... hard to beat 50 bottles for $13.50. $8.50

Amazon.com : 10ML 50pcs Empty plastic dropper bottle/Dropping Bottles(Drops of plug can removable)plastic bottle Eye Liquid Dropper : Beauty

Vktech 10ml Dropper Bottles, Plastic, 50 Pcs: Amazon.com: Industrial & Scientific

And here's 50 needle tip bottles for $12.99

Low Density Polyethylene (LDPE) 10ml Squeezable Dropper Bottle Eye Liquid Drop Needle Tip (Pack of 50): Amazon.com: Industrial & Scientific

Those VK tech are the bottles I bought that don't work

 

[RobbieVape]

Just on those bottles the last lot I bought at this price range from china were terrible. Super thin so squonk easy but the concern was the smell! Read a few articles on the cheap one that cases of the plastic taste leaking into the juice. Id say look at a better quality to erase any chances of that occuring


Sent from my iPhone using Tapatalk

 

[motabrownie]

Hows those Vector top caps coming along? Im finally used to the airflow but the drip tip is still a major bummer.

 

[super_X_drifter]

Just on those bottles the last lot I bought at this price range from china were terrible. Super thin so squonk easy but the concern was the smell! Read a few articles on the cheap one that cases of the plastic taste leaking into the juice. Id say look at a better quality to erase any chances of that occuring


Sent from my iPhone using Tapatalk

Reading that, I just took my amazon purchased bottles off and put the original TMOD bottles back on. Since I have 4 of em, I can just swap between a full and an empty bottle on the fly. Not as easy for a lazy person than having 10 full ones on standby but better than vaping leached petroleum products

 

[Tbev]

I use the needle tip bottles, but if you go cheap you can get some nasty side effects. I always get a couple to try out then place a big order, that's a pretty good deal from amazon but I don't want al random colors, sometimes the different colors are harder/softer than others.

 

[petemoss]

I use the needle tip bottles, but if you go cheap you can get some nasty side effects. I always get a couple to try out then place a big order, that's a pretty good deal from amazon but I don't want al random colors, sometimes the different colors are harder/softer than others.

ah crap, I didn't want to hear that about side effects. I understand that the softer plastics are made with the bad chemical that causes off-gassing. At the doctor's office waiting room yesterday they had a video about "brain fog". I think I may have that!

 

[Tbev]

Softer isn't necessarily bad, I just meant I don't want different colored caps bc I didn't want them to be different.