[CLOSED]

[Tbev]

Agreed!


So the idea I'm kicking around is this. Fcuk evolve, if I would have used dna40 boards when people forest stayed asking for regulated feeders I would have been replacing them like vf / vs, plus I asked Brandon and he didn't give me any reason to give him another shot. So say w go with the sx350 J so you weenies that want temp control are happy. .. I want to use lipos that are removable and will supply enough voltage / miliamp to function at the boards full 100w output. Thoughts?

 

[Nautilusfan]

All for the sx350J chip! Lipos, maybe........ Charge time is the big issue with them but since they would be easily interchangeable? Correct?

 

[ST Dog]

I want to use lipos that are removable and will supply enough voltage / miliamp to function at the boards full 100w output. Thoughts?

That sounds better.
Not a fan of Lipo for a mod though. Charging with USB sucks too.

 

[mommabird62]

I had two authentic hana modz at one time. Had to send one in to replace the dna30 board with very little use under its belt. Was disappointed in that. And I take real good care of my gear. I then PIF'd it to someone in need. And the other one I kept to do my builds on. LOL

Still have some copper tube mechs and all of them are packed up except for my Vanilla Copper. I still enjoy using that one some. I just love copper [emoji6] And it is a really nice mod. The switch is smooth as buttah. LOL

So yeah, I feel real good about the dependability of my mechs and if things go all to heck with the g'vmnt, well they can just kiss my hiney because I know I have some equipment that will outlast me. (Have even started DIY juice. )And my sweet little brass beauty will be right there squonking away with my REOs [emoji5]️I have a feeling she is going to be one of my faves. Probably should come up with a name [emoji6] okay...speech over. Vape on my friends!


Sent from my iPhone using Tapatalk with my paws

Mommabird62

 

[Tbev]

That's why I want them to be removable if you charge them they the board (onboard, not removable ) you have to charge them at 1ma, I'd they are removable you can get a charger and charge them way faster, granted you have to buy a charger, ok but I'm leaning that way bc I'm talking about making the best mod available, I've never spared any costs building mods I'm not gonna start now. The question is are people willing to buy them, do people really want that badasz of a mod ? If enough people want it I'll build it.

 

[Tbev]

GDEAL`S BUTTONS

PEKO BUTTONS AVAILABLE FOR ORDER RIGHT NOW.
I will make these out of Navy Brass, 101 Copper and Aluminum
PM to order, please tell the PEKO guys, I get yelled at by "the help" for posting in those threads.

 

[Nautilusfan]

Yea charging would take for ever at 1A. I would think probably 5A would be good.

 

[ST Dog]

Yea charging would take for ever at 1A. I would think probably 5A would be good.

Then you need battery that can handle that rate.

2C would mean a 10Ahr battery. (10000 mA hr)
I wouldn't charge much faster than 2C.

 

[Hemptation]

TBrethen. My brother. The community is screaming for a high end regulated temp control squonker.

And honesty. I think there are 2 levels being dreamed about. A lower end version with removable 18650's And then the lipo version.

I have played enough with the ni200 at this point to tell you. You can get a satisfying Vape from 25-35 watts with temp
Control at 0.12 ohms. It's there. I have run 50 mils in one wick. And the coil was not that nasty. I have vaped all the juice out of an RTA and changed flavors with no ghost Flavor.

But every where I have been looking. This is what the community is screaming for. Lots of people are not just pissy with evolv about their chips. But the build quality of 200$+ devices that do not function properly due to quality of build. 510/chip not being 100% secure and buttons not being sealed etc.....
Whoever hits the market with this mod. Wins. And yes I hope it's you. Because I know the quality of the mod I will be getting if you build it I will buy extra lipid and a lipo charger if that's what is required. And I believe their is bypass on the sx chip. To turn into mech mode if that's desired.

I trust your opinion and view. And will. Continue to follow regardless. And will own a t-mod or 2 before the year is out

And you go regulated. And I might just sale my entire stash to own 4 of your mods. No doubt

 

[ST Dog]

I'm all for regulated voltage. I don't need easy adjustable vv/vw stuff. But it'd be nice to have a constant voltage across battery life instead of the drop in a pure mech. Just needs to be able to handle full power.

 

[Nautilusfan]

Then you need battery that can handle that rate.

2C would mean a 10Ahr battery. (10000 mA hr)
I wouldn't charge much faster than 2C.

Hmmmmm. This is true. Off to do some battery research

 

[Tbev]

Thats the trouble with the chip, you never get full power, you get as much power as you can get at the minimum battery voltage throughout the range of the batterys voltage. you give up that max for consistancy. Im trying to figure out if its doable to put an overkill lipo in there say one that is dead at whatever the lowest rewuired voltager for the chip to maintain max output, make sense...???

 

[mudram99]

Thats the trouble with the chip, you never get full power, you get as much power as you can get at the minimum battery voltage throughout the range of the batterys voltage. you give up that max for consistancy. Im trying to figure out if its doable to put an overkill lipo in there say one that is dead at whatever the lowest rewuired voltager for the chip to maintain max output, make sense...???

No Tom I'm lost because all of the regulated mods/chipsets I use have boost where they produce higher voltage than the battery/batteries alone. While I don't use them for that I am in the range you discussed earlier I prefer a steady constant vape through-out the use at lower wattage/voltage. Which when using a mech my optimum area is short lived. I can build to match it but the range doesn't last near as long as my regs. I realize it is probably due the juice I mix myself has a tight window of wattage that produces the best flavor.

 

[havok333]

This is the part where I once again wish I had studied electrical engineering in college, lol.

 

[Tbev]

I believe that is incorrect.
The chip your using does not produce more power than the batteries have.

If I'm wrong that's the answer I'm looking for. What chips are you talking about. ?

 

[mudram99]

Ok, you are correct in voltage with 7v being the max on a dual bat mod, but the wattage is some how increased up to say 150 watts in my ipv3 and will run for days at 18 to 20 watts, even little isticks last much much longer at that range than the equivilent build on my mechs to achieve a comparable vape.

 

[mudram99]

I guess what I am trying to say is if you don't mind the vape literally deteriorating with each press of the fire button on a mech they are indeed great. For someone who prefers a constant vape it can only be obtained with regulation.

 

[Tbev]

I think it's down regulating to accommodate for your build...That's why everyone thinks they last so long.

 

[Tbev]

Since a chip won't increase power, say like thru the use of a capacitor, I'm thinking a lipo with over kill specs, regulated down to acceptable ranges, even down to non sub ohm ranges, like the sx350j does, is the next step.

 

[mudram99]

I think it's down regulating to accommodate for your build...That's why everyone thinks they last so long.

You are correct through the use over abundant power it can be regulated DOWN to provide me with a much larger window of my optimum preferred range. Sorry for the incorrect info and thought as to what was going on.