is a Audi A6
Last edited:
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Ok, all y'all need to stop with the name changes! My little bird brain can only absorb so much! It's like waking up one morning to discover that Bruce is now Caitlyn 
Please, I'm not wanting or meaning to offend anyone ...
Please, I'm not wanting or meaning to offend anyone ...
Last edited:
That is a good oneOk, all y'all need to stop with the name changes! My little bird brain can only absorb so much! It's like waking up one morning to discover that Bruce is now Caitlyn
Had some spare time tonight so took the time to give the Tmod an overhaul.
First stripped it of its clear coat, it had taken on a yellow tinge darker in some areas, not sure what exactly it was but wouldn't rub off so sanded the baby back to alu, then gave it a deep clean and sanded off all the contact points. On rebuild also dropped on my copper button I hadn't yet used
Also you'll notice the different bottle. I was getting a bit of leakage on the original one from the top seal where it came out of the bottle cap. If anyone is in the market for the best bottles there is the new Sunbox "V3 Cappy" bottles fit perfectly, they ain't cheap but best bottles for filling, you can go right to the top and lose no juice through the tube when doing up, 100% leakproof too! I grabbed an extra 10 hoping I could replace all the bottles in my other mods, first one I tried and it fits like a glove
Next for the first time trying I made a dual coil Twisted Quad 30 Gauge, ramp up time is super quick, 7 wraps fell in at 0.35
End result this baby is hitting like a frigging freight train! It's like having a new mod, stumpy wearing the chuff cap with no spit back is rocking but seriously thinking I'm going to have the drop the nic level down. So the moral of the story give the Tmod a good old clean down, sand off all the contacts and you will be repayed tenfold [emoji6]
Sent from my iPhone using Tapatalk
First stripped it of its clear coat, it had taken on a yellow tinge darker in some areas, not sure what exactly it was but wouldn't rub off so sanded the baby back to alu, then gave it a deep clean and sanded off all the contact points. On rebuild also dropped on my copper button I hadn't yet used
Also you'll notice the different bottle. I was getting a bit of leakage on the original one from the top seal where it came out of the bottle cap. If anyone is in the market for the best bottles there is the new Sunbox "V3 Cappy" bottles fit perfectly, they ain't cheap but best bottles for filling, you can go right to the top and lose no juice through the tube when doing up, 100% leakproof too! I grabbed an extra 10 hoping I could replace all the bottles in my other mods, first one I tried and it fits like a glove
Next for the first time trying I made a dual coil Twisted Quad 30 Gauge, ramp up time is super quick, 7 wraps fell in at 0.35
End result this baby is hitting like a frigging freight train! It's like having a new mod, stumpy wearing the chuff cap with no spit back is rocking but seriously thinking I'm going to have the drop the nic level down. So the moral of the story give the Tmod a good old clean down, sand off all the contacts and you will be repayed tenfold [emoji6]
Sent from my iPhone using Tapatalk
Attachments
Robbie, do you take restoration commissions?
Thanks LB thats the beauty of the Tmod, take some sandpaper and some elbow grease and that mod will be spanking again. Next overhaul I'll revisit with a finer grade, sand under water it started taking on a mirror finish, that in itself though creates havoc with my OCD and finger prints! The quad twisted has helped, seriously though nic sick is kicking in at 6mg. Amazing difference though, surprising what a bit of maintenance on the contacts does.
Sent from my iPhone using Tapatalk
Super X V3 Cappy bottle link, they also do a 10+1 free pack, well worth it for existing/future mods plus by time you pay shipping
Single Bottle €8.90
SunBox Store - "Cappy V3" 10 ml Bottle with Tube - for E8
10+1 bottle pack €89.00
Scan down to bottom of above link and 10 bottle tab is there to be clicked (for some reason I can't copy it)
Sent from my iPhone using Tapatalk[/url]
Single Bottle €8.90
SunBox Store - "Cappy V3" 10 ml Bottle with Tube - for E8
10+1 bottle pack €89.00
Scan down to bottom of above link and 10 bottle tab is there to be clicked (for some reason I can't copy it)
Sent from my iPhone using Tapatalk[/url]
I've sprung for some expenseive mods and attys but I'm not sure I coulld spend $11 on a bottle. Does the offset feed tube cause any problems?
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
Nope cause the black top can rotate so it's in line, was perfect fit and supply tube perfect size and length. Really is a top bottle, seems weird getting excited about a bottle but the filling of it right to the brim is worth an extra 2 or 3 ml alone
Sent from my iPhone using Tapatalk
Oh they were in stock earlier. If imagine they make a good profit at the cost so expect stick levels to be back up soon, just keep a watchful eye on them
Sent from my iPhone using Tapatalk
Ok, all y'all need to stop with the name changes! My little bird brain can only absorb so much! It's like waking up one morning to discover that Bruce is now Caitlyn
Please, I'm not wanting or meaning to offend anyone ...
LOL I'm with you LB. only one name change per day y'all! Takes me that long to memorize who the new one goes to. LOL And changing the avi at the same time really gets me cornfusled [emoji12]
Sent from my iPhone using Tapatalk with my paws
Mommabird62
I grabbed a pack. I hope they were in stock. They got added to my cart and paid and a confirm email recd. hey Robbie, do they close completely for filling extra bottles for the road?
Also, can you unscrew and remove the bottle from the mod or is it a pop off cap?
Prolly questions I shoulda asked before confirming order eh?
I grabbed a pack. I hope they were in stock. They got added to my cart and paid and a confirm email recd. hey Robbie, do they close completely for filling extra bottles for the road?
Also, can you unscrew and remove the bottle from the mod or is it a pop off cap?
Prolly questions I shoulda asked before confirming order eh?
The bottle can unscrew, the black top is two part top, part of it stays attached to the bottle then a thin part that fixes inside to the cap unscrews , this bit has the tube passing through it, this design means juice does not squirt out of the tube when tightening up.
Ref travelling with the bottles they don't have a sealing top but you could either fold the tube over and hold this way with an elastic band or use something like these. Note each bottle is supplied with its own tube.
Sent from my iPhone using Tapatalk
LOL I'm with you LB. only one name change per day y'all! Takes me that long to memorize who the new one goes to. LOL And changing the avi at the same time really gets me
Sent from my iPhone using Tapatalk with my paws
Mommabird62
Sorry to confuse. I should have waited a day or two to change my avi. Didn't think about that.
No problem marshall! I got you and sloth all memorized now [emoji1] Now it's safe for sXd to switch his LOL
Sent from my iPhone using Tapatalk with my paws
Mommabird62
No problem marshall! I got you and sloth all memorized now [emoji1] Now it's safe for sXd to switch his LOL
Sent from my iPhone using Tapatalk with my paws
Mommabird62
As much as I want to change my screen name, it just doesn't make sense for me. I have YouTube, Instagram, Facebook and a whole lotta history on here that would get erased by a user name change.
You know not how much I wanna change it. My Xbox live gamer tag (my current username) is kinda beat. The other is so much more fitting.
- Status
Similar threads
