You got it bud, I'll get her spiffed up. I'll put the new internals in too.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
If you want one or two, or ten, shoot me an e-mail or pm. The kit has new contacts so I need to know what mod you need it for.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Dropbox - 510 Screw Jig.mp4
Bummer, I thought it would post the video here.... It's a link to a video, guess it's better than nothing
Bummer, I thought it would post the video here.... It's a link to a video, guess it's better than nothing
Would definitely need a couple and one for the dually.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tom will this include the copper contact thing too ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Looks like it... being an over-squonker I constantly overflow several atties with the original 510; Thump, Stumpy, Marquis and Manta , I'd need a wet-suit for the new ones
BTW, I'm enjoying my 26650 much more since switching to the Green Efest, should'a listened to Tom a whole lot sooner.
BTWII, love the shape of the dna 200, could you photograph it next to a Dually and 26650 for comparison for those on the fence?
Scroll back through the thread the 200 is pictured beside a dualy the sxj and a single 18650. Isn't to far back
Thanks, I didn't see it with the 18650, but next to the Sxj and his White Derlin Mod (which I love)
Green effest's ! Haha, I felt like a total as$hole recommending an effest, but they simply don't make any better cells. The greens last longer and I'm not gonna say that they can handle anything but I run them at 0.2ohm all day.
I'll post some pics, in a sec.
Sent from my SM-G900V using Tapatalk
I'll post some pics, in a sec.
Sent from my SM-G900V using Tapatalk
I cant find thise pics, I swapped sd cards a little bit ago. It's a tad longer, bottle to backend , like 0.1in at its widest point its 1.3in vs the dually which is 1in on the dot and its the same height, its shorter than the sx and the mech mods , well that I'm not positive, it might be the exact same. The bottom line is its small, it's very very small for what it is, all the damn stuff inside. I could have made it even smaller if it was just a lipo but it needs to hold the lipo or the dual 18650s tray so I had to go a little bigger.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Sorry, yeah, new copper contact, insulator, nut and pin, the new pins are all stainless now.
Sent from my SM-G900V using Tapatalk
Yeah, that's a big difference!
New pin
Sent from my SM-G900V using Tapatalk
Sent from my XT907 using Tapatalk
So the last four SX350J mods ever are finished and available now. I'm posting them here first, I'll give it 24 hours until I post them elsewhere. They are brand new, that's the protective film on the screen. First come first serve.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
I NEED EVERYONE'S INPUT!!!!
If you could have a DNA75 8.5ml mod which runs off of 3.7v that means you can run a lipo or an 18650 what configuration would you prefer?
A. Built in , non removable lipo, that you can charge in the mod, (charges slower).
B. Removable lipos, so you can carry multiple lipos and swap them out. (you'll need a lipo charger to charge them externally)
C. 18650, removable, Keep it simple.
What do you think ?
If you could have a DNA75 8.5ml mod which runs off of 3.7v that means you can run a lipo or an 18650 what configuration would you prefer?
A. Built in , non removable lipo, that you can charge in the mod, (charges slower).
B. Removable lipos, so you can carry multiple lipos and swap them out. (you'll need a lipo charger to charge them externally)
C. 18650, removable, Keep it simple.
What do you think ?
I'm definitely making a dna75 mod, it will probably be an 8.5ml, maybe 10ml, definitely magnetic door, definitely as small as humanly possible.
Since I've been running the lipo in the DNA200 I've gotten a couple maxamps lipos and a couple cheap lipos, the cheap lipos are not as good, but they are pretty dam good. If I made the 75 with removable lipos you can buy three lipos, they are only like five bucks each, and swap them like you swap 18650s, it's just add convenient, if not more convenient, and they are cheaper actually, and you can charge them in ten minutes. I like the single 18650 setup, don't get me wrong, but the removable lipo setup may have the edge... That being said, I'll build whatever you guys want.
Sent from my SM-G900V using Tapatalk
Since I've been running the lipo in the DNA200 I've gotten a couple maxamps lipos and a couple cheap lipos, the cheap lipos are not as good, but they are pretty dam good. If I made the 75 with removable lipos you can buy three lipos, they are only like five bucks each, and swap them like you swap 18650s, it's just add convenient, if not more convenient, and they are cheaper actually, and you can charge them in ten minutes. I like the single 18650 setup, don't get me wrong, but the removable lipo setup may have the edge... That being said, I'll build whatever you guys want.
Sent from my SM-G900V using Tapatalk
- Status
Similar threads
