@Tbev ..a stupid question here...does the dually work in series, in parallel, or can it work both ways?
[CLOSED]
- Thread starter Tbev
- Start date
- th_trl_thread_readers 0
- Status
Thanks DoffyParallel
Push firm. Mine connects to one battery with a slight button touch. But needs a former maybe 1mm or less push to connect the two.
Great mods. Mine is in constant use.
Tbev prototyped a series/lipo MOSFET, but was concerned we'd asplode ourselves
Sent from my LG-H815 using Tapatalk
it is a fantastic mod I have to agree. And the two-touch thing is interesting..but is it OK to connect to one battery only (if you don't push down hard enough)?It'll fire. Just won't have the same grunt, and will unevenly discharge cellsThanks Doffy
Sent from my LG-H815 using Tapatalk
You def, want it use both, otherwise your just carrying the other one around. Send me an e-mail, you should send it in for an upgrade actually, I have a new contact setup for the dually that makes the throw super short and ensures both cells get used evenly.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Will do. Actually I need upgrade kits for all 3 tmods I have.
Sent from my iPhone using Tapatalk
I had my dually upgraded to the new contact system, not the new Squonk pin yet... And it is an improvement over the previous! Definitely worth the upgrade
Sent from my VS986 using Tapatalk
Last edited:
yepp and i scrapped the dna75 idea,i like 11.2 v...but hey i dont care what anyone does.if you are having fun then thats what matters.i just didnt understand how the 75...vs...the 200 worked and when it was explaind i was like...well the 200 is way more how i vape so why bother...ya know...my opinion only.
I have a couple original mechs on sale, $250 Orange one has the lizard pattern, green one is acid etched.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
I vote for replaceable lipo. As small and light a mod as practical given
battery life.
Low/no sag is a wonderful thing.[/QUOTE]
battery life.
Low/no sag is a wonderful thing.[/QUOTE]
I've been trying different lipos in the 200 and I gotta say I like them much better than 18650s, besides performance, which it's better, they charge quick, they are easy to carry, even tho you don't really need too. I carry a lipo around sometimes and it's great not having to worry about it arching in my pocket either, I love em! I've been using a 1300mah lipo that's not quite as good as the maxamps 1800mah, but it only costs five bucks, that's like half of a vtc, talk about full power till the end, no sag, for five bucks, it's killer, lipos agree my fave for sure.
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
I'm using a lipo charger, says thunder something on it, pretty popular, you can get a defect lipo charger for twenty, thirty bucks that will work just fine
Sent from my SM-G900V using Tapatalk
Sent from my SM-G900V using Tapatalk
Upgraded both my dually and micro 18650 with the new squonk pin and it makes a huge difference... I have to make sure not to over squonk... Definitely recommend if you run low ohm coils and have to squonk frequently
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
Was it easy to do or did you send it to Tom?
Received the upgraded positive set up. I am diggin it. Seems to have also made the button push a little easier too.
Also received a matchy button.
@Tamer El-Meehy He was able to just send me the updated positive assembly without sending him the mod.
Also received a matchy button.
@Tamer El-Meehy He was able to just send me the updated positive assembly without sending him the mod.
cool!!..was it easy to do?? I'm asking because I want to avoid sending my three mods halfway around the globe and back to get the upgade.Received the upgraded positive set up. I am diggin it. Seems to have also made the button push a little easier too.
Also received a matchy button.
@Tamer El-Meehy He was able to just send me the updated positive assembly without sending him the mod.
Oh, that's how you meant.
Yes. just unscrew the nut, slide the copper bar off, unscrew the positive pin, then unscrew the white positive pin insulator.
New one goes in with the steps reversed.
The nut is a tight fit as its one of those nylon lock nuts.
One of the most important things to me when I design a mod is the ability to totally replace all the internals without having to send it in. If you want I'll walk you thru the whole thing, it's easy, and the locknut doesn't really need to be tight, that's why I use the nylon locknut, it won't back off.
I will have to agree, it squonks a good amount better, the regular pins are probably bigger than anyone else's, but these ones are really big, they are also thicker walls so you can be mean to them and not worry about breaking them.
Sent from my SM-G900V using Tapatalk
I will have to agree, it squonks a good amount better, the regular pins are probably bigger than anyone else's, but these ones are really big, they are also thicker walls so you can be mean to them and not worry about breaking them.
Sent from my SM-G900V using Tapatalk
- Status
Similar threads
