[CLOSED]

[havok333]

Oh yeah, it's tiny, it's as absolutely small as humanly possible to make an 18650s and a 8.5(or 6ml, they are the same diameter) bottle. It's about 0.5in taller than an 18650 B.C. The threads in the 510 are 0.5in (that's how long they have to be for an atty) so that's how thick the cap is...and it hits just as hard as the 10ml, they are built the same way but the 10ml bottle actually holds like 14ml.

With a Thump on top, those micros are a ridiculous tiny setup!

Sent from my XT907 using Tapatalk

 

[MFToms59]

With a Thump on top, those micros are a ridiculous tiny setup!

Sent from my XT907 using Tapatalk

Exactly how I'm running them, single-side coil ~2.7mm ID 26g Nic 80.

 

[skillzizzo]

I had no idea that the micro was no bigger than a business card! That's amazing, Tom!

Agreed. My favorite is the pic tom posted of it in the change pocket of his pants before. I would Deffenitly be loosing a micro

 

[Kaezziel]

Hahaha! Id's funny that you said that, I found a micro underneath my car seat a week ago, prolly been there a month, hahaha!

Sent from my SM-G900V using Tapatalk

HAHAHA! Love it! That'd be a pretty cool surprise, though... better than finding loose change in the couch cushions!

 

[Tamer El-Meehy]

Tom..dropped you a line on the upgrade kits


Sent from my iPhone using Tapatalk

 

[Tbev]

Man these dna200 mods are turning out SOBADASS!
I'M STOAKED!!!
I'm gonna make you guys wait for pics tho, hahaha !

Sent from my SM-G900V using Tapatalk

 

[Tbev]

Ok maybe I'll share a little..just a couple teasers ...

 

[skillzizzo]

Getting pretty good at the engraving thing my freind. You ready to try out some of those designs I sent you awhile back brother. Looking good the little bear is pretty kick a-s

 

[poconojo]

New to the T-MOD forum. I just ordered an 18650 micro aluminum mod. These mods look awesome. Cannot wait to get it. I like dripping so I decided to get into the world of squonking. Can anyone recommend a good bottom fed rda that doesn't leak or have spit back?

 

[Doffy]

New to the T-MOD forum. I just ordered an 18650 micro aluminum mod. These mods look awesome. Cannot wait to get it. I like dripping so I decided to get into the world of squonking. Can anyone recommend a good bottom fed RDA that doesn't leak or have spit back?

not all three in one rda

good and don't leak i have never experienced in one rda together, others will disagree, lots will swear by whatever catfish made this week, then reject it next week

just dremel what you use to drip is the best bet

 

[poconojo]

not all three in one rda

good and don't leak i have never experienced in one rda together, others will disagree, lots will swear by whatever catfish made this week, then reject it next week

just dremel what you use to drip is the best bet

I know what you are saying. I have owned so many atomizers that others have said are the best, and I have yet to find one that is perfect. I will find something to use with it.

 

[tpedwards]

Doffy is kinda right. There are some that are better than others though. Couple of options that are readily available include- velocity clone, sapor, tsunami and the narda clone also.

Sent from my SM-G935F using Tapatalk

 

[LittleBird]

New to the T-MOD forum. I just ordered an 18650 micro aluminum mod. These mods look awesome. Cannot wait to get it. I like dripping so I decided to get into the world of squonking. Can anyone recommend a good bottom fed RDA that doesn't leak or have spit back?

I guess I'm one of those who likes his attys . If you can find a Stumpy, that's a great one. I haven't had any leaking or spit back -- but I don't build below .4 ohms (not a cloud chaser). OTH, I don't even own a dremel! Hope you love squonking!

 

[havok333]

Another atty that may work for you, a bottom fed Thump! Top air is leak resistant but some don't like the tiny chamber.
Also, the Maker is top air and works very well.

Sent from my XT907 using Tapatalk

 

[TheDigital99]

New to the T-MOD forum. I just ordered an 18650 micro aluminum mod. These mods look awesome. Cannot wait to get it. I like dripping so I decided to get into the world of squonking. Can anyone recommend a good bottom fed RDA that doesn't leak or have spit back?

Poconojo - What is your go to dripping RDA?

 

[poconojo]

Poconojo - What is your go to dripping RDA?

I use the Marquis(clone) and Quasar(original) for dripping right now. I am interested in something new though. I have been looking at the steam crave RDA right now. I looked at the stumpy and the thump and they may be a possibility. What do you use?

 

[TheDigital99]

I like a little more air in my Rda's... Right now my in my rotation is a Maker (Top Air), Stumpy, Drifter, Velocity V2

Sent from my VS986 using Tapatalk

 

[Tbev]

Oh yeah @poconojo ! I love the quasar, I still rock one on one of my mods, if you like that little chamber try the thump, very similar in changer volume so the flavor is on oar and the top air thump is as good as it gets besides the vector as far as keeping it from leaking, it's my second fave only bc I prefer the vector a little.

 

[poconojo]

Oh yeah @poconojo ! I love the quasar, I still rock one on one of my mods, if you like that little chamber try the thump, very similar in changer volume so the flavor is on oar and the top air thump is as good as it gets besides the vector as far as keeping it from leaking, it's my second fave only bc I prefer the vector a little.

The Quasar is one of the best atomizers for flavor on the market imo. I have a draw full of atomizers. I will give the thump a try. Also looking at the mark bugs chalice 3 clone. The original is just not to be found. Can't wait to get the mod i ordered. I don't know why I never tried a bottom feeder mod before. I am not into all these regulated mods today. I still like my old mechanicals. I also like quality machining, kind of the high end stuff. I still own all of my Super-t mods and GG stuff. T-mods look to be of great quality.

 

[73neb]

The Quasar is one of the best atomizers for flavor on the market imo. I have a draw full of atomizers. I will give the thump a try. Also looking at the mark bugs chalice 3 clone. The original is just not to be found. Can't wait to get the mod i ordered. I don't know why I never tried a bottom feeder mod before. I am not into all these regulated mods today. I still like my old mechanicals. I also like quality machining, kind of the high end stuff. I still own all of my Super-t mods and GG stuff. T-mods look to be of great quality.

There are genuine chalice 3's available. PM me for the website.