Coil Building* is the itaste mvp ohm regulated?

[EastCoastCloudChasers]

i was wondering if there is a regulator that makes the itaste mvp 2.0 not go under a certain ohm? by building my own coil in an rda or kayfun can I build a low ohm coil like .5 to .8?

 

[EBates]

http://www.reddit.com/r/RBA/comments/1rnnf1/how_low_can_i_go_with_my_itaste_mvp_20/

 

[Jscheiben]

I was running a 1 ohm on my MVP, it would fire at .9 ohm but not much lower I think.

 

[lamebore]

your mvp2 should read below one ohm coils but it certainly wont fire them. And thats a good thing. I think the amp limit of this battery is around 3 or 3.5 and you will be pulling more than that if you go under one ohm on a fresh battery. The lowest coild my mvp 2 read was .5

 

[Btsmokincat]

I have two MVP2's both with Kayfuns on them. One is 1.7 Ohms and the other is 1.3 Ohms. I definitely find the 1.7 Ohms works better and makes better use of the VV/VW range.

Just a small tip... If you have an android device download "Vaper's Toolbox" app, it's free on Google Play. It is an awesome app that you put in what you are using and the Ohms you want and it tells you how many wraps to make! It works awesome and was made by a member here: ScottP!

 

[Hijack]

I have two MVP2's both with Kayfuns on them. One is 1.7 Ohms and the other is 1.3 Ohms. I definitely find the 1.7 Ohms works better and makes better use of the VV/VW range.

To O.P. Because you have vv/vw you don't need to use sub ohm coils. That's more for mech mods where the voltage is fixed. It should actually preform better with a 1.5-2.0 Ohm.