- Status
How would you compare the Vapeonly to T3? I'm very happy with T3, I bought the Vapeonly after comments of bad contacts of the T3 with the eVic. Those heads look feeble compared to the massive T3 heads, and I see potential leaking problems with plastic screwing onto metal...
The only massive thing about the t3's head is that the head itself serves as a base. The size of the wicks is the same for both the vapeonly and t3 ( take them apart to see for yourself). If anything, the vapeonly's head is harder to disassemble; things are tighter-fit. Having said that, personally I find both slightly disappointing with the stock coils. I have re-wicked both and they are performing much better but both suffer from gurgling at low liquid levels.
I find them very comparable in vape and built quality. Have not had any issues with the BCC after removing a wick like i do on the T3. The only advantage of the BCC is the larger capacity and the option to use any 510 drip tip.
Do you have enough airflow? If you don't it can become a juice straw. Unscrew it a little and draw a little less hard.
Everybody complains about gurgling. I find that when my level is low I have to draw a little less hard. If some liquid does seep in, I blow it out and the problem is solved. I've vaped them almost dry, just blowing once or twice. What voltage are you vaping? It does require you up the voltage a little, I usually vape the 1.8 ohm at 4.2v
Airflow to the BCC is from the bottom so if it is too flush with your device juice will accumulate in the mouth piece. Make sure you are getting proper airflow.
I swear I saw it, but I can't find it! It's the BOD or BOB mod for eVic, you can use in 18350 or 18650 form, it's telescopic...
- Status
Similar threads
