Compatible Tanks with Smokeless Image Volt?

[moneymike000]

I would like to have the option to switch to a tank instead of the standard Smokeless Image cartomizers. What are some good compatible tanks?

 

[Baditude]

May I ask what Smokeless Image battery that you hope to put a tank on?

 

[Renzuli]

Welcome to ECF , but not many tanks are going to work very well with that particular setup . They are small , low mah batteries and won't really support tanks very well . You can get some CE3's or 4's and give them a go . Unless someone here knows of something else , I'm afraid your out of luck . And before long , you will be replacing those , with something bigger , and better anyway . So just use em , till you get ready to upgrade .

 

[moneymike000]

May I ask what Smokeless Image battery that you hope to put a tank on?

The X2 1000 mah version.

 

[Baditude]

The X2 1000 mah version.

The slimmer 3.5 ml Smokteck DCT polypropylene tank sold by My Vapor Store should be able to fit a blank Smokeless Image XL size (45mm) cartomizer. This is just the tube and end caps, which is what you are really looking for. Of course, you will need a drip tip for a mouth piece and a carto punch tool.

The tank will likely look slightly top heavy on the X2. Also, use only the stainless steel version carto.

http://www.myvaporstore.com/Pro_DCTank_Tube_p/510dcttp.htm

 

[moneymike000]

The slimmer 3.5 ml Smokteck DCT polypropylene tank sold by My Vapor Store should be able to fit a blank Smokeless Image XL size (45mm) cartomizer. This is just the tube and end caps, which is what you are really looking for. Of course, you will need a drip tip for a mouth piece and a carto punch tool.

The tank will likely look slightly top heavy on the X2. Also, use only the stainless steel version carto.

Pro DCTank Tube

This will work out perfectly. Thank you so much!

 

[kiwivap]

Welcome to ECF , but not many tanks are going to work very well with that particular setup . They are small , low mah batteries and won't really support tanks very well . You can get some CE3's or 4's and give them a go . Unless someone here knows of something else , I'm afraid your out of luck . And before long , you will be replacing those , with something bigger , and better anyway . So just use em , till you get ready to upgrade .

Their batts go up to 1300 mah Renzuli.

 

[kiwivap]

I would like to have the option to switch to a tank instead of the standard Smokeless Image cartomizers. What are some good compatible tanks?

They have bottom coil T3s coming which are popular. Also, a simple thing to do is get an 808-510 adapter. They cost about $2 and then you can use both 808 and 510 tanks. Here's a pic of my X2 with a vivi nova. I used an 808-510 tank adapter. This is the big 3.5 ml vivi and I just put it on to show how an adapter works. I'd use a mini vivi nova with an X2 so it looks more streamlined. And I'd use a 2.8 ohm vivi head, or 2.4 ohm.

 

[Johnnie Price]

What's wrong with the CE3 Smokeless Image already sells?

 

[kiwivap]

The CE3 holds 1.5ml. They give a great taste but after I cleaned them I couldn't get them to work as good, and some leaked. That was my experience. I also got tired of fiddling around with syringes.
I think the T3s will be better, which they are going to stock.

 

[Johnnie Price]

The CE3 holds 1.5ml. They give a great taste but after I cleaned them I couldn't get them to work as good, and some leaked. That was my experience. I also got tired of fiddling around with syringes.
I think the T3s will be better, which they are going to stock.

So they didn't leak before cleaning?

I ask because I'll actually be upgrading to the 1300 X2 soonish, and with a pack of 5 for $10 I'd be happy to make them disposable parts. And I don't think I'll mind the syringe.

Aesthetics matter as much to me as form and function.

Thanks in advance.

 

[Mookie]

There is also an even smaller tank at 2.5ml that might work: eGo Tank Cartomizers, eGo Tank Clearomizers | MadVapes

 

[kiwivap]

So they didn't leak before cleaning?

I ask because I'll actually be upgrading to the 1300 X2 soonish, and with a pack of 5 for $10 I'd be happy to make them disposable parts. And I don't think I'll mind the syringe.

Aesthetics matter as much to me as form and function.

Thanks in advance.

I had a couple leak before cleaning. They really just aren't my thing. I like the Vision vivi novas a lot, partly because I can use colored metal tanks with them - form and aesthetics for me. And I will try the T3s.