Complete wicking tips

[Jepes]

First post, I have been trying to find a complete Guide on properly wicking my mini rda but only able to get a few details :
-coil should glow all at the same time during test fire (how to achieve this? Should my coil look like a tight spring to do so?)
-wick should be touching the coil but not too tight or too loose. (any other trick to determine the sweet spot aside from trial ang error?)


I'm only days old into vaping and already able to reduce my analog by 80%. Hope to fully quit my analog because I have hypertension and very acidic.

Sent from my cherry Mobile S120 Flame aka Karbonn A21 using Tapatalk 2

 

[FACE MEAT]

Congrats on cutting down on the analogs. There's a ton of info here regarding wrapping wicks. The search function reveals countless threads.

 

[Sheila Michele 1971]

not only does searching the forum turn up a ton of posts, but if you search youtube, you will find all sorts of tutorials.

Also, you might want to cut your nicotine using an RBA even if you dont go the sub ohm route. Had to cut mine in half even using 1.7 ohms.

 

[Jepes]

Congrats on cutting down on the analogs. There's a ton of info here regarding wrapping wicks. The search function reveals countless threads.

I don't have much time for "tons and countless" but I think I really have to find time

not only does searching the forum turn up a ton of posts, but if you search youtube, you will find all sorts of tutorials.

Also, you might want to cut your nicotine using an RBA even if you dont go the sub ohm route. Had to cut mine in half even using 1.7 ohms.

I'll start cutting down by next week. I use to smoke a pack a day so it may be a bit hard to do so.


Sent from my cherry Mobile S120 Flame aka Karbonn A21 using Tapatalk 2

 

[AttyPops]

If you haven't already....get some standard cartos and/or an atomizer or something too.

This is so you A) have some backups handy B) get a feeling for the "pre-wound" stuff

I wouldn't recommend an RBA right "out of the gate". But I admire your gumption.

 

[Jepes]

If you haven't already....get some standard cartos and/or an atomizer or something too.

This is so you A) have some backups handy B) get a feeling for the "pre-wound" stuff

I wouldn't recommend an RBA right "out of the gate". But I admire your gumption.

I would have but costs way too high here, IDK maybe because God knows why. But I do love to tinker.

Sent from my cherry Mobile S120 Flame aka Karbonn A21 using Tapatalk 2