Control head wobles?

[DaxFX]

Hey guys i just notice if i grab my evic by the battery tube i can move the control head side to side, its really very small movement and almost not noticable. But you can feel. Are you guys can notice the small wigle? they are like that? I really dont care because still feel solid and deas not woble if i dont forced a bit, but is something to make me think is wearing out something.

Sent from my iVap using Tapatalk HD

 

[crxess]

Neither of mine have any movement.
A wobble is not a forced movement but a free rocking motion.

Sounds like your battery tube is not fully tight.

 

[DaxFX]

Ok sorry my bad english, is not a woble is a forced movement.

Is not the battery tube i have 2 one in black and one in chrome and both tight very well and i can move the hed a bit side by side just a tiny bit


Sent from my iVap using Tapatalk HD

 

[crxess]

Kind of odd
Both the Black and Chrome are Non original tubes. May be a difference in thread machining.
Mine are
(1) original silver tube
(1) Ego-T 18350 tube (silver)

Don't think it will cause any problems though.

 

[DaxFX]

Kind of odd
Both the Black and Chrome are Non original tubes. May be a difference in thread machining.
Mine are
(1) original silver tube
(1) Ego-T 18350 tube (silver)

Don't think it will cause any problems though.

both tubes are joytech original, my evic is the chrome version with top ring and battery tube in chrome and the black is the joy evic set with battery tube and top ring and both tubes say eVic

Sent from my iVap using Tapatalk HD

 

[crxess]

Sorry, by non-original I meant the Evic was designed with 1 tube - the Silver.
The Chrome/White and Black tubes/caps were released as accessories later. Then per customer request
Some have been added as complete color kits.

Still these could easily be coming from different machinist/equipment or even facilities. One thing I have learned about China products - there is no such thing as Standardized.

Anyway, as stated, they should not give you any problems.

 

[DaxFX]

The chrome white and black are joytech original product, my evic came with the chrome body with the original sealed box so no way the vendor could change the body, and the black body was inside a joytech black box with serial very similar as the box for usb and charger inside of the eVic package

my evic is the newest version with 2 screw holding the top cap that now you can buy in diferent colors. Check at myvaporstore.com they dont carry the silver one anymore just the newest version in black white and chrome and they are authorized joyetech retailers. Any way i found my problem as you all now the selector ring is very loose to the feel and when i was getting the feeling is the head movement was only the ring and the way i was holding the evic, mmmmm no beer at the time LOL

Sent from my iVap using Tapatalk HD

 

[rasmith1959]

Any way i found my problem as you all now the selector ring is very loose to the feel and when i was getting the feeling is the head movement was only the ring and the way i was holding the evic, mmmmm no beer at the time LOL

Sent from my iVap using Tapatalk HD

I have a V2 eVic also and my control ring is loose as well. Phil Brusardo also mentioned this when he reviewed the eVic on YouTube. One thing pbrusardo did in the review was he ripped off the USB port cover, now I can understand why. If one is not careful, it can be a pain to get back in place properly.

Sent from my Galaxy Nexus using Tapatalk 4 Beta