Convert your m401/EVO to the perfect drip smoker

[kishd]

I got tired of filling carts and getting inconsistent vapour and hit with my EVO. Pulling off the cart and dripping onto the bridge was also becoming cumbersome.

Using a drill bit I drilled the back of the cart where the small draw hole is and enlarged it so that the cart became a straw with large holes on both sides.

I now just add two drops of e-liquid through the hole at the back and puff away. As soon as the vapour decreases I just add another drop No more fiddling.

 

[Adik Ted]

Put 5 or 6 drips into a plastic milk carton top and just dip the atomiser bridge into that.

 

[kishd]

Bit difficult to dip while on the move. However the tip of my juice bottle fits nicely into the "straw" so I can top up without fiddling with the e-cig.

 

[Adik Ted]

True kishd. I've only just fully understood what you meant in your first post and I may give it a go if I can get hold of one of those dropper bottles. The method I suggested (which was posted by another forumite) isn't in the least messy and almost all the juice ends up on the bridge rather than inside the atomiser (as can be seen by how little juice comes out when blowing out the atomiser after a few days). Maybe your method would shorten the atomiser/battery life but I'd settle for that for a simple way of dripping when out and about. On the thread where I read the dipping suggestion someone suggested blocking the hole on a cart, filling it with cart padding, saturating that with juice and sealing with the plastic plug. When out and about he would remove the plug and push the atomiser bridge into the padding as a means of 'dripping'. Your way does sound easier.