Copper Penny Mod Problems

[HeiSINberg]

I was just wondering if anyone else has this mod yet and has any issues with it so far? Cause im having a few problems and I just got it in the mail today. None of my atomizers fit all the way down onto the mod itself, my patriot, tobh, atomic, etc, dont fit. I have about 6 or 7 mech mods so I know my way around them I just dont get it, ive tried adjusting everything I could and nothing works. And the top cap threading on this thing is just plain pitiful, for a 200$ mod made in the U.S. im just disappointed. Its all chipped and jagged and plain missing in some sections of the threading. The top cap is hardly even secured on the mod, half turn on and half turn off and onto the floor. Im just straight disappointed and was hoping for some advice or if anyone else has these same problems. Help is appreciated and thank you.

Sent from my SCH-I545 using Tapatalk

 

[Cloud Junky]

I was just wondering if anyone else has this mod yet and has any issues with it so far? Cause im having a few problems and I just got it in the mail today. None of my atomizers fit all the way down onto the mod itself, my patriot, tobh, atomic, etc, dont fit. I have about 6 or 7 mech mods so I know my way around them I just dont get it, ive tried adjusting everything I could and nothing works. And the top cap threading on this thing is just plain pitiful, for a 200$ mod made in the U.S. im just disappointed. Its all chipped and jagged and plain missing in some sections of the threading. The top cap is hardly even secured on the mod, half turn on and half turn off and onto the floor. Im just straight disappointed and was hoping for some advice or if anyone else has these same problems. Help is appreciated and thank you.

Sent from my SCH-I545 using Tapatalk

I would return it...

 

[HeiSINberg]

I would return it...

Im trying too. I contacted Jvapes where I purchased it and I also emailed the company who made it, mad industries. I was just hoping it wasnt only me with the bad luck on this.

Sent from my SCH-I545 using Tapatalk

 

[ImThatGuy]

Have you tried adjusting the top pin? It has a double adjustable top pin.

I haven't heard anyone with fitting problems.

 

[HeiSINberg]

I adjusted both pins, none fit with battery installed. Guess im just the lucky one!

Sent from my SCH-I545 using Tapatalk

 

[HeiSINberg]

Update: Talked to the owner of Mad Industries, awesome guy, hes gonna fix the threading issue and positive pin for me. I had to send it back to him but hell, at least he stands behind his company and products. I'll post back with pics and another update when I receive it back from him next week sometime.

Sent from my SCH-I545 using Tapatalk

 

[Dowtish]

Dude! this is not good! I just ordered the same mod from the same place last night. I hope they werent a bad batch.

 

[HeiSINberg]

He still has my mod and is fixing everything. My thing is im not the only one that had the atomizer and pin problem. Its all over his instagram page. I havent even used this mod lol kinda upsetting to be honest. I hope you have better luck.

Sent from my SCH-I545 using Tapatalk

 

[Dowtish]

He still has my mod and is fixing everything. My thing is im not the only one that had the atomizer and pin problem. Its all over his instagram page. I havent even used this mod lol kinda upsetting to be honest. I hope you have better luck.

Sent from my SCH-I545 using Tapatalk

I just got mine today. Absolutely no issues. Very relieved

 

[HeiSINberg]

Good im glad! I just got mine back from him today and its perfect. Im actually very pleased with this mod. Hits like a beast!

Sent from my SCH-I545 using Tapatalk

 

[Joka]

Pictures anyone? =p

*cAtCh YoU oN tHe Flip SiDe*

 

[HeiSINberg]

Pictures anyone? =p

*cAtCh YoU oN tHe Flip SiDe*

I can post pics for you once I get out of work. Sorry Im not comfortable taking this out of the house yet lol id cry if I dropped it.

Sent from my SCH-I545 using Tapatalk

 

[Dowtish]

 

[HeiSINberg]

Another update: I actually did get this mod back from Mad Industries and they fixed everything I had a problem with. The threads are all thick and smooth, he sanded down the nipple on the 510 pin so everything sits flush now, and he sent out an extra pair of positive pins incase anything were to come up and not sit flush. They even polished it before sending it back to me. Great company and I do appreciate what they've done for me. But I have decided to sell this mod, I just wanted to address that yes everything is fixed. It was brought to my attention that I should do so with me making this thread I dont want anyone getting the wrong idea, I would never sell someone a faulty item, or at least post in the for sale thread without saying the problems it has.

Sent from my SCH-I545 using Tapatalk

 

[MattyRetro]

Good to hear that everything got fixed promptly and correctly for you. I saw your F/S thread and then your post about this issue. That is cool of you to explain everything and make sure the next owner is getting what they are supposed to get.

 

[HeiSINberg]

Good to hear that everything got fixed promptly and correctly for you. I saw your F/S thread and then your post about this issue. That is cool of you to explain everything and make sure the next owner is getting what they are supposed to get.

Thank you, a friend through here brought it to my attention and it made sense. I dont want people thinking im trying to pawn it off on someone else without having these problems addressed first. I would never do that to anyone. Too many good people here on ECF no one deserves that.

Sent from my SCH-I545 using Tapatalk

 

[Claviger]

Mine is flawless. Every type of atomizer I have put on sits flush and leaves no gaps in the tube if I adjust the battery pin correctly....

Glad he fixed it for you!!

Threads are silky as they come! Only mod I want now is the 4nine and I think I'll have hit mod heaven.