Coppervape BF Mod
- Thread starter Layzee Vaper
- Start date
- th_trl_thread_readers 0
- Status
Howdy Morely!* sips coffee * "Squoooonkk"
* waves, holds up little sign reading "Saying 'Hey', ... "Hey."" *
Also just received my Kryton rda bf pin also ,
Just thought id update since not posted for a while , [emoji16][emoji106]
Sent from my ONEPLUS A3003 using Tapatalk
Just thought id update since not posted for a while , [emoji16][emoji106]
Sent from my ONEPLUS A3003 using Tapatalk
Hadaly caution:
Someone in a REO forum dropped a spring using a Hadaly with a metal drip tip.
The Hadaly screws sit high and in the path of a drip tip with a longer 510.
Check your builds with the cap and the drip tip on.
Someone in a REO forum dropped a spring using a Hadaly with a metal drip tip.
The Hadaly screws sit high and in the path of a drip tip with a longer 510.
Check your builds with the cap and the drip tip on.
You should build the Hadaly with the legs on top, coil down to place the coil in front of the airflow...if built like this, there should be no issue with the bottom of your drip tip making contact with the coil.
I wonder if it was the Drip Tip that made contact? Or if it was the rba Cover?
Cause there Doesn't look like there is a lot of Clearance between the Posts and the RBA Cover.
Remember: This RDA was Not Designed to use a Metal RBA Cover.
Different issue - that's not a Hadaley - but YES, someone also said trying a metal Narda cap on this one that it was shorting...
I wonder if it was the Drip Tip that made contact? Or if it was the RBA Cover?
Cause there Doesn't look like there is a lot of Clearance between the Posts and the RBA Cover.
Remember: This RDA was Not Designed to use a Metal RBA Cover.
that isn't the hadaly.I wonder if it was the Drip Tip that made contact? Or if it was the RBA Cover?
Cause there Doesn't look like there is a lot of Clearance between the Posts and the RBA Cover.
Remember: This RDA was Not Designed to use a Metal RBA Cover.
I don't see how that is even possible, unless they were using a pretty funky drip tip...plenty of clearance in mine
You are Both Correct. This Isn't a Hadaly.
But after looking at the Wasp RDA, putting a Metal NarDa RBA Cover on it might be a Bad Idea.
Last edited:
I knew about the problem a few months ago.
I tried a friction fit drip tip and it wasn't seating all the way.
I don't have an authentic, but the SXK and Shenray are the same, the screw head edge is about <1/2ml into the path of the drip tip.
Last edited:
Confirmed. Happened to me on Hadaly with a Clapton build and a SS UD rifled drip tip. Shorting on the edge of the screw head. I tasted it before anything bad happened. Too lazy to alter the screw or clamp, I just switched to the same DT in delrin.
Ok,i tried the modification on that no toy clone,and it went bad haha.The holes on the side were very easy to open up into 1 big hole,but when trying to do the same on the inside holes,the walls are so thin that they just chipped away,so i would not recommend trying to alter that rda,unless you only do the holes on the outside.Let me know how that goes and if you can snap a few pics of the process I would be very grateful.
I really want to increase the airflow on my NoToy. I love the look, i just need a little more airflow
This looks like it might work in CV bf 3fvape.com/rebuildable-atomizer-supply/14254-authentic-oumier-wasp-nano-mini-rda-rebuildable-dripping-atomizer-gold-brass-glass-22mm-diameter-3ml.html?search_query=+RDA&results=2751#.WO9-DqDTV-o
Sent from my ONEPLUS A3003 using Tapatalk
Wasp RDA
Sent from my ONEPLUS A3003 using Tapatalk
Wasp RDA
I have the stainless version on the way if it ever ships haha,looking forward to trying it out.This looks like it might work in CV bf 3fvape.com/rebuildable-atomizer-supply/14254-authentic-oumier-wasp-nano-mini-rda-rebuildable-dripping-atomizer-gold-brass-glass-22mm-diameter-3ml.html?search_query=+RDA&results=2751#.WO9-DqDTV-o
Sent from my ONEPLUS A3003 using Tapatalk
Wasp RDA
I purchased a speed revolution atty and I dont own a squonker.....Silly me, but i do have plans to get one.
My experience with a highend squonker didnt go to well so most likely will get a copper vape or franken skull clone to customize to my liking.
Also the speed revolution atty is clearly a Hellfire design and inspired atty. Thats one of the resons i purchsed it....
Sent from my LGMS550 using Tapatalk
My experience with a highend squonker didnt go to well so most likely will get a copper vape or franken skull clone to customize to my liking.
Also the speed revolution atty is clearly a Hellfire design and inspired atty. Thats one of the resons i purchsed it....
Sent from my LGMS550 using Tapatalk
After vaping for a few years I decided to give BF a try. My Copper vape finally came. I was all set for it had a hadaly clone all coiled and wicked ready. Two strands 28g ss twisted .4 ohm. My first go is going great.
Need O rings for the (now can't remember what the name is , No Legal or No Pity ) RDA , you know the one that has 3 air holes instead of the dual coil 6 air hole model that tears up the inside O ring until you sand off the sharp edge .
It's the 18 mm diameter model , anyone know the O ring size or would most any fit if around the same diameter ?
Thank you
It's the 18 mm diameter model , anyone know the O ring size or would most any fit if around the same diameter ?
Thank you
- Status
Similar threads
