Coppervape BF Mod
- Thread starter Layzee Vaper
- Start date
- th_trl_thread_readers 0
- Status
Which facility did your package go to? Both my Coppervape and Narda packages hit Chicago early this morning (placed separate orders thinking that the Coppervape might be delayed for a while but they both shipped the same day). Hopefully they don't get sent to the Cedar Rapids, Iowa facility which is a customs inspection facility. Had a couple things sent there before which delayed delivery by about a week. Otherwise I should have them sometime next week..hopefully.
Well hopefully you get your package soon! If not, I'd be bugging the hell out of the USPS.
Has anyone seen anywhere to get cheap clone caps like this for the o-atty
O-Atty Wide Bore Slam Caps
Sent from my iPhone using Tapatalk
O-Atty Wide Bore Slam Caps
Sent from my iPhone using Tapatalk
Good question - nope. They just came out with the O-atty clone this week - haven't seen any cap options for it...
Damn! Hopefully O-atty will sell well enough for them to start selling clone caps!
Sent from my iPhone using Tapatalk
Has anyone considered the desire yuri rda , its a 2 post velocity has 3 air slots so can be run in both dual coil or single coil mode , an looks to be perfect for putting a BF pin in to the base ,it dont come with a bf , but has the right setup an deck ,for it 22mm atty ,
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Has anyone considered the desire yuri RDA , its a 2 post velocity has 3 air slots so can be run in both dual coil or single coil mode , an looks to be perfect for putting a BF pin in to the base ,it dont come with a bf , but has the right setup an deck ,for it 22mm atty ,
Sent from my ONEPLUS A3003 using Tapatalk
Looks good to me.
Just needs a hollow 510 pin nice roomy 22mm an three air slots ,so can do Single or dual builds so does look ideal time i put an order in for mod makers uk for some BF pin s
Sent from my ONEPLUS A3003 using Tapatalk
Has anyone considered the desire yuri RDA , its a 2 post velocity has 3 air slots so can be run in both dual coil or single coil mode , an looks to be perfect for putting a BF pin in to the base ,it dont come with a bf , but has the right setup an deck ,for it 22mm atty ,
Sent from my ONEPLUS A3003 using Tapatalk
I have one. It is a Nice BF-able RDA.
I got it because I could run it in Single Coil Mode (Not sure why All RDA OEM's don't include a 3rd Air Slot?). It worked pretty well with my standard NarDa Build - 26ga NiChrome 80 @ .6 Ohms.
It just didn't have as much Flavor as my NarDa. So since I was going to run it in Single Coil Mode, I ground off the Tops of the Posts and Shortened the RBA Cover to reduce the chamber size.
This Helped a Lot in the Flavor Department. But it Still was quite what I was getting from my NarDa. So I went down to a 26ga SS build @ .35 Ohms.
With the Lower Ohm SS build and the Reduced Chamber it is Pretty Close to the Flavor of my NarDa's. And the Velocity style deck makes it Very Easy to build on.
Overall, I would say that it is a Very Good RDA. With Very Good Build Quality. And if I didn't own a NarDa, it would be at the Top of my Flavor RDA List.
I ordered the Fat Daddy bottom feeder pins in both sizes thanks to the helpful advice on this forum. I have one that fits the Magma RDA perfectly so i am going to convert that one.
Thankfully i finally got my package after repeated calls to PO offices , i had to challenge the PO employee to an all out brawl to the death for him to give it up . He said he decided to keep my mods for himself and i said i don't think so punk .
Anyways that topper that comes with the Coppervape sucks as a single coil atty but rocks as a double . As others said you should block one air slot for a single but i forgot .
I am very impressed with the quality of it as others have mentioned .
Thankfully i finally got my package after repeated calls to PO offices , i had to challenge the PO employee to an all out brawl to the death for him to give it up . He said he decided to keep my mods for himself and i said i don't think so punk .
Anyways that topper that comes with the Coppervape sucks as a single coil atty but rocks as a double . As others said you should block one air slot for a single but i forgot .
I am very impressed with the quality of it as others have mentioned .
Im currently using the wolfpaw RDA as bottom feed since they included one with it in its little chest box along with 2 strips of bacon cotton , and the 2 sets of claptons an mini tool ect , but put un dual spaced fused clapton an it rocks flavours great looks stunning woth it stabilised wood drip tip , works well too [emoji16] very happy since was a cheap original atty
Sent from my ONEPLUS A3003 using Tapatalk
The wood drip tip is turning out very handy can chain vape with hot atty an the stabilised wood tip stays cooler than the delrin tip , not only does it look great works dam well too for chain hitting the atty
Last edited:
Now the search for the ultimate single coil flavor RDA that would work well for BF. I prefer a somewhat cooler vape so it may be difficult.
No Name No Toy looks good but no clones yet.
No Name No Toy looks good but no clones yet.
What about this one chamber is reduced eith big posts it can be bottom fed dual or single build , Ch RDA Atomizer-14.85 and Online Shopping | GearBest.com Mobile
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Would a cthulhu rda shuriken, with its clamp style deck the 510 is none adjustable but pertrudes through the deck so maybe possible to put in a Bf pin or not just wondering since its pretty cramped in there they have a larger atty coming out similar style 24mm or 25mm coming soon so if its similar post an deck design maybe both could be converted just wondering , if any one has seen or used any of these as only 11£ for shuriken at mo
Sent from my ONEPLUS A3003 using Tapatalk
Or this one
Cthulhu Hastur RDA 2S atomizer
Material: 304 Stainless Steel
Top air flow adjustable
Come with squonker pin ( bottom fill ) and normal pin
Swirling air flow ( bigger airflow than V1 )
Spit-back protection derlin drip tip
Velocity style posts
2.0mm wire holes
5mm juice well
PEEK insulators
Includes 510 adapter, come with something that makes it single coil option by blocking off one side
Sent from my ONEPLUS A3003 using Tapatalk
Or this one
Cthulhu Hastur RDA 2S atomizer
Material: 304 Stainless Steel
Top air flow adjustable
Come with squonker pin ( bottom fill ) and normal pin
Swirling air flow ( bigger airflow than V1 )
Spit-back protection derlin drip tip
Velocity style posts
2.0mm wire holes
5mm juice well
PEEK insulators
Includes 510 adapter, come with something that makes it single coil option by blocking off one side
Last edited:
I am blown away at the flavor of my just converted Magma , easy as pie to convert and just using one airflow hole with a single coil build is amazing . Really intense flavor which is what's the most important to me.
- Status
Similar threads
