Coppervape BF Mod

Status
Not open for further replies.

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
Apr 16, 2010
41,624
1
84,752
So-Cal
I ordered a copper vape from gearbest on Nov.25 and I' m still waiting. Nov.28 I received a tracking number and so far it tracks nothing.
How long should one wait before canceling?

I'm not sure what to tell you?

Because 3 of my last 4 orders that have come from China, the Tracking has been Wacked.

The Tracking would just sit there doing Nothing. And then, in 1 Day, they would Magically appear at my Post Office and be Out for Delivery.
 

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
Gearbest best to uk is around 2 weeks , but there is Xmas and a lot more postal parcels than usual this time of year,people Order earlier an send earlier , but I wouldn't really go by tracking to be honest , you chose free delivery so expect min 2wks can be 5 days before tracking kicks in also

Sent from my ONEPLUS A3003 using Tapatalk
 
  • Like
Reactions: cdmcfud

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
Using a Hadaly on your CV?

What's the strongest but quickest heating build I can use on my Hadaly with this single 18650 mech? I usually use 24ga dual coils 3mm 5 wrap .25Ω on my Aromamizers and 3.5mm on my Boreas & Velocity at 69W Aro & Bor and 105W on the Velocity. I haven't built a single coil atty since I progressed from Kayfuns.
I have 22/24/26/28 ga kanthal & 28/32 fused clapton to work with.
Thanks
 
Last edited:
  • Like
Reactions: minimalsaint

benley73

Ultra Member
ECF Veteran
May 2, 2016
1,382
2,219
52
fasttech for me is the opposite its a lot slower to the uk , Than Gearbest or efuntop . Both have EU warehouse.
So sometime its pretty quick 5 days til 2wks fasttech can be 2ks min up to 30 days plus, An UK Customs are opening fasttech orders since they lie on the decoration for Customs, batteries being seized some have reported too.
So i guess it all depends on what your ordering if its in stock or not, and location of delivery, I been lucky as yet ,on my orders , all turned up , Im awaiting 2 from fasttech split my order up to post out quicker and 5 orders in bound from gearbest
2 are pre orders So not instock or released yet , like Vtbox 250w Dna , on sale 112£ used a code an got for 87.57£CV not bad for 250Dna with a removable lipo , hopefully its a decent one ,

Sent from my ONEPLUS A3003 using Tapatalk
 
  • Like
Reactions: cdmcfud

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
I went with a 4mm 22ga coil @ .26Ω - Rayon & DIY PB Toffee
Hits quick with good flavor/vapor but gets hot after 3-4 big blasts in a row.
No regrets.

15440361_1878293129068175_8092221301400479962_o.jpg


She's a beauty

15418461_1878293165734838_3584390632524224191_o.jpg
 

Mowgli

Runs with scissors
ECF Veteran
Verified Member
Mar 25, 2013
8,723
36,953
Taxachusetts
I have been running 3mm ID 26ga 5 Wrap (about .32 Ohms) SS in my Single Coil RDA's.

For me, and the Flavor I am looking for, they work the Best.
I usually just find a build that works good and run it.
It's so easy to build this I'll probably experiment a bit.
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
Got some nicer toppers on 'em tonight, and running good...
Black is a Catfished Maker with a fatso drip tip that looks stupid on everything else i have, and SS is a Hellfire Fury I just got in... :D

Both, I think running my "go-to" build: kanthal, dual 3mm, 27 gauge, 5 wrap for about 0.45 ohms.

2sofar-1.jpg
 
Got some nicer toppers on 'em tonight, and running good...
Black is a Catfished Maker with a fatso drip tip that looks stupid on everything else i have, and SS is a Hellfire Fury I just got in... :D

Both, I think running my "go-to" build: kanthal, dual 3mm, 27 gauge, 5 wrap for about 0.45 ohms.

View attachment 620019
i really like that fury, been looking for one for some time now. somewhat of a unicorn now, I guess. where were you able to score that one, if you don't mind?
 

Train2

ECF Guru
ECF Veteran
Verified Member
May 11, 2013
12,273
36,193
CA, USA
Bought from another ECF-er...
They are a bit hard to find - but worth it I think: small chamber, leak-proof...
And for some reason, no clones!
I might even like it better than my Nuppins!

i really like that fury, been looking for one for some time now. somewhat of a unicorn now, I guess. where were you able to score that one, if you don't mind?
 

Tagi

Super Member
ECF Veteran
Verified Member
Feb 26, 2014
682
1,192
Dallas Texas
Using a Hadaly on your CV?

What's the strongest but quickest heating build I can use on my Hadaly with this single 18650 mech? I usually use 24ga dual coils 3mm 5 wrap .25Ω on my Aromamizers and 3.5mm on my Boreas & Velocity at 69W Aro & Bor and 105W on the Velocity. I haven't built a single coil atty since I progressed from Kayfuns.
I have 22/24/26/28 ga kanthal & 28/32 fused clapton to work with.
Thanks

Use smaller wire and make a parallel coil. Heats up faster then the large wire and cools down faster which slows down heating up the top cap.

Will also require less power for same heat and vapor production leading to better battery life.

Try a 2 strand 28 gauge build. If its not warm enough bump the strands up until you get the heat you like.
 
  • Like
Reactions: Mowgli

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
Got some nicer toppers on 'em tonight, and running good...
Black is a Catfished Maker with a fatso drip tip that looks stupid on everything else i have, and SS is a Hellfire Fury I just got in... :D

Both, I think running my "go-to" build: kanthal, dual 3mm, 27 gauge, 5 wrap for about 0.45 ohms.

View attachment 620019


Fatso drip tip lol.
 
Status
Not open for further replies.

Users who are viewing this thread