Coppervape BF Mod

[NGAHaze]

I can see the advantage of losing about 100 grams

You'll be adding grams if you go with the brass version of the CV.

 

[benley73]

Yes go with Aluminium model its built well can be polished up if you choose to shiny [emoji41]

Sent from my ONEPLUS A3003 using Tapatalk

 

[eGoinMD]

Aluminum for the win. I have no desire for another brass mod. I already have a Phantus Mini(which I love in concept, and if it was aluminum like the Microstick/Microbig, it would be in every day rotation) sitting unused based solely on weight. At least the Kato lasts all day, which makes up somewhat for the weight.

 

[ThaFuzz]

Woooo, finally my next shipment processed through customs, should be here by tuesday. 2 cv kits, bottles, 2 Derringer v3s, and some beauty rings.

 

[benley73]

Well 2 new atties both Coppervapes BF Atties too , the split atty by copper vapes Bellow with a funny looks , plug to make single coil builds this one has a 1.2ml tank underneath ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Second one is coppervapes version of atty O ,

bf pin

Deck

Now im just awaiting on the Narda clone an the sxk clone from 3f vapes that i posted map code for a few days ago , just received also my coppervapes Tf gt 3 very nice flavourful vape at 20w single coil build 5ml ,along with Coppervapes KF v5 (5ml) Glass an ss tank inc , build quality is superb on all , well done coppervapes ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[MyMagicMist]

My coppervape came with the Old Style RDA. And it was kinda a Train Wreck. I haven't tried the New Style RDA like is shown in this Picture.

This RDA is rather nice, nicer than I expected for being stock. On their Fake Book page, I inquired if they will release this RDA on its own and possibly manufacture a brass toned one. I was using this one on my silver CV this morning, have now swapped over to my brass CV w/ the brass toned Goonie (a Goon clone w/ a 2.5m squuonk pin).

 

[benley73]

You want to hsve a look at all tbe other 10 coppervapes rda,s they make a lot nice than that one , i dont use it myself , but do like the others they make

Sent from my ONEPLUS A3003 using Tapatalk

 

[BreSha6869]

I recieved this today....

$8.90 LE 86 BF Styled RDA Rebuildable Dripping Atomizer - stainless steel / 24mm overall diameter at FastTech - Worldwide Free Shipping

Not bad for $8.

 

[Train2]

Aaaaaaand......?
How ya gonna build it?
I have it in a cart, but I often throw stuff out of the cart before I buy...

I recieved this today....

$8.90 LE 86 BF Styled RDA Rebuildable Dripping Atomizer - stainless steel / 24mm overall diameter at FastTech - Worldwide Free Shipping

Not bad for $8.

 

[BreSha6869]

Aaaaaaand......?
How ya gonna build it?
I have it in a cart, but I often throw stuff out of the cart before I buy...

Good point. I have NOT built it yet. I am going to finally try a pair of my pre-wound 0.5ohm Fasttech kanthal coils. 100 for just over $5. $5.61 Kanthal A1 Pre-Coiled Resistance Wire for Rebuildable Atomizers (100-Pack) - 24 AWG / 0.5mm dia. / 0.5ohm / 21.8*21.8mm leads at FastTech - Worldwide Free Shipping Apparently these are great. I have well over 2000 feet of wire, so I guess I bought these as I'm lazy!

I'll report back once I actually vape with it.

 

[benley73]

I recieved this today....

$8.90 LE 86 BF Styled RDA Rebuildable Dripping Atomizer - stainless steel / 24mm overall diameter at FastTech - Worldwide Free Shipping

Not bad for $8.

Yeah its pretty decent vape from it , i have one too posted last week on here further back ,

Sent from my ONEPLUS A3003 using Tapatalk

Now this one looks like it could be fun either basic dual builds or single or dual vertical builds possibly to make quads ? ,

Coppervapes version of the split atty

 

[benley73]

Have a look here , lots of coppervapes atties an such ,
coppervape - Best coppervape Online Shopping | GearBest.com Mobile

Sent from my ONEPLUS A3003 using Tapatalk

 

[BreSha6869]

24mm LE 86 , Bf pin ,Im liking

I set up dual Nichrome build
0.50 Ohm 2.5mm id ,
Give a Pretty decent performance ,

flavours pretty dam nice in fact if i do say so [emoji7],
has a plug for single builds , by blocking of one side of the Deck
works great as a dual ,
Includes 2 slot airflow on either side , , Top cap can slide round to close down airflow slightly or fully.
Orings when wet can be a bit slippy so spins when screwing down or undoing ,
Has nice wide bore drip tip ,

12mm wide inner bore size ,So vapes and flavours are plentiful, ,

At 6.99$ on efuntop , sqounker pin is installed on delivery ,
Uses flat head Screws milled into on deck edges as posts , deck is easy to use, unusual setup ,

Center post has a sqounker hole through it to bf the deck ,
Which also has cut outs to allow the wires to run through both side of the deck, T shaped top with a flat head screw at Either side ,

Allowing you to just wrap wire around the side and clamp down , so possibly fits some fat wires ,

Overall im liking this very small rda for 24mm it has a height of around 15.4mm not including the drip tip , Which helps to maximise flavours ,I believe

Would i recommend this atty , YES im liking the flavours ,

With my lill 2.5mm id coils i can put out some decent clouds too , but best is the flavours,p pics ...

Could do with beefier O rings to allow ypu to screw down the RDA tight and allow you to unscrew from the mod , instead its spins, but for this price im sure i can find some spares from others , 24mm shorty stumpy type RDA ,
Clone of the LE 86 ,bottom feed RDA , actually enjoying it , [emoji7]

Sent from my ONEPLUS A3003 using Tapatalk

Cool. I missed this last week.

I'm going to build mine tomorrow with 28ga SS as I haven't touched stainless in ages.

 

[herb]

This RDA is rather nice, nicer than I expected for being stock. On their Fake Book page, I inquired if they will release this RDA on its own and possibly manufacture a brass toned one. I was using this one on my silver CV this morning, have now swapped over to my brass CV w/ the brass toned Goonie (a Goon clone w/ a 2.5m squuonk pin).

If you like dual coils i think the included RDA is very good , for singles it's horrible but thats understandable .

 

[benley73]

Ive got the (Sa RDTA , ) (AO RDA) ( TF gt 3 RTA) (KF v5 RTA). Was looking at The TA RDA an possibly the LT RDA ,. Possibly pick them up , im liking the 2 RTA,s an the rda,s ive already get , think ive possibly got well more than i need for now since ive got the Clone of dot mod rta (SxK pt rta 2ml ) on way , 28mm Sherman Rta on the way
An the 30mm supreme plus , on pre order , ive already got a ton of other rta,s , along with a prototype UD 25mm rta , to play with which im liking a v2 version of one of there best tanks from last year , I need to stop buying now , just went on a mad spree to get in all the ones i liked before this daft uk 2ml tank size limitations comes in , since we now have , a 10ml juice bottle capacity for the imported juices in effect

Sent from my ONEPLUS A3003 using Tapatalk

 

[herb]

Have a look here , lots of coppervapes atties an such ,
coppervape - Best coppervape Online Shopping | GearBest.com Mobile

Sent from my ONEPLUS A3003 using Tapatalk

Okay Benley , since you have acquired every BF RDA on the planet whats the scoop , which one blows the others away as far as single coil setups without leakage ?

Not looking for "it's OK or it's pretty good" i want the names of the ones that dominate the others lol.

 

[benley73]

Okay Benley , since you have acquired every BF RDA on the planet whats the scoop , which one blows the others away as far as single coil setups without leakage ?

Not looking for "it's OK or it's pretty good" i want the names of the ones that dominate the others lol.

Ive not tried them all yet herb , im still waiting on some too arrive , dual coil id say desire Yuri RDA sqounker mode and Wolfpaw bf mode are my favorites , but thats personal preference , wolfpaw has more room for better builds , liking a lot the Atty O for single coils, but Like I say still awaiting others to arrive , been distracted from Bf coppervapes by the coppervapes kf v5 and the TF gt v3 which both rta,s given superb flavours from single coil builds on low watts low volts perfect for a single battery mod , plus I've converted over a 24 mm Kennedy RDA to sqounker as well as the Virus RDA with dual clamp goon styled deck over to BF too , The Yuri does do very well though as a dual not tried single in it might do well being only 22m , flavours are dam near perfect from it an its a cheap rda for a none Clone ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

25mm RDA bf , looks interesting . Never heard of before though
ShenRay SR One Style RDA Silver 316 SS 25mm Atomizer w/ BF Pin

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Bottom feed pin included with this rdta style dripper with tank

Ashura Style Silver 22mm RDTA Rebuildable Dripping Tank Atomizer

Sent from my ONEPLUS A3003 using Tapatalk