Coppervape BF Mod

[Nomoreash]

25mm rda bf , looks interesting . Never heard of before though
ShenRay SR One Style RDA Silver 316 SS 25mm Atomizer w/ BF Pin

Sent from my ONEPLUS A3003 using Tapatalk

I got one from Focal, used it maybe twice. It's 25mm diameter with a deep juice well, beefy velocity style post and enough area for huge builds with massive airflow options. It's got 3 big airflow slots and 3 smaller holes with no way to adjust for single airflow, 2 or 3 can be open and adjusted but not just 1. Machining is great, airflow adjustment is a little tight but should loosen with some use. Comes with wide bore drip + adapter with a regular size ss tip and the usual bag of spares.

I'm a single coil flavor chaser and all my others are 22mm or smaller so it's huge to me. I'm sure it will shine with the right build and power but it's not my style. I ordered it by mistake, was searching for squonk attys, saw it came with a bf pin and put it in my cart without checking the specs.

 

[herb]

Ive not tried them all yet herb , im still waiting on some too arrive , dual coil id say desire Yuri RDA sqounker mode and Wolfpaw bf mode are my favorites , but thats personal preference , wolfpaw has more room for better builds , liking a lot the Atty O for single coils, but Like I say still awaiting others to arrive , been distracted from Bf coppervapes by the coppervapes kf v5 and the TF gt v3 which both rta,s given superb flavours from single coil builds on low watts low volts perfect for a single battery mod , plus I've converted over a 24 mm Kennedy RDA to sqounker as well as the Virus RDA with dual clamp goon styled deck over to BF too , The Yuri does do very well though as a dual not tried single in it might do well being only 22m , flavours are dam near perfect from it an its a cheap rda for a none Clone ,

Sent from my ONEPLUS A3003 using Tapatalk

I was wondering about that Coppervape Kayfun V5 , sounds great.

 

[herb]

25mm RDA bf , looks interesting . Never heard of before though
ShenRay SR One Style RDA Silver 316 SS 25mm Atomizer w/ BF Pin

Sent from my ONEPLUS A3003 using Tapatalk

Shows a very basic deck , $19.99 though , ShenRay makes outstanding quality clones .

Now Benley , you know what you must do , you must obtain this RDA immediately at any cost . it's a must have item and we all know Benley gets what Benley wants.

Please break out the wallet , i will wait for you to purchase & tell you that you did the right thing because there was just no getting around it .

Let me know after the order is completed.

 

[benley73]

I was wondering about that Coppervape Kayfun V5 , sounds great.

Matey , dont wait , its really worth getting , its one i will definitely recommend , you can have it restricted or not , but the flavours are superior to many other RTA,s out there , it really is that good , an for 10£ im buying more to last since after may 2017 we in uk will no longer be able to buy an risk getting seized at customs , so im going to order at least 3 more 2 for family one extra for me , [emoji106][emoji106][emoji106]

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

An runs on such low wattage too , so battery life for days this shines at 20w -40w , but 25w is great so even Single battery dna 75w This is perfect match

Sent from my ONEPLUS A3003 using Tapatalk

 

[TheWestPole]

Well 2 new atties both Coppervapes BF Atties too , the split atty by copper vapes Bellow with a funny looks , plug to make single coil builds this one has a 1.2ml tank underneath ,

Sent from my ONEPLUS A3003 using Tapatalk

Coppervape BF Split RDTA came in last week, and I think I found the perfect atty for the windowless squonker conversion of iStick 100. For those who don't know, when you squonk the Split you are refilling the ~1.5 ml tank, so squonking is infrequent, about six times only for each full bottle of juice. Other functional benefits are being able to see when you are running low in the tank, and getting the consistent hit of an RDTA rather than the ups and downs of a typical BF RDA.

There are issues with the Split, most with the plug used for single coil. Shaving/grinding it down to fit better fixed that. The flavor is excellent single coil, mainly because of its small chamber. Have not tried dual coil yet.

 

[benley73]

Im vaping supreme Aromamizer 25mm and lyte , mod farther 30mm , boreas , bellus , Cloudnus ,rdta , billow v3 plus an this coppervapes taifun gt 3 and coppervapes kayfun v5 are being used more since i got flavour match an better than ones i listed for such lower power , means better battery lower juice usage too , [emoji9]win win , there not big cloud chucker but deffo flavour producer ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Shows a very basic deck , $19.99 though , ShenRay makes outstanding quality clones .

Now Benley , you know what you must do , you must obtain this RDA immediately at any cost . it's a must have item and we all know Benley gets what Benley wants.

Please break out the wallet , i will wait for you to purchase & tell you that you did the right thing because there was just no getting around it .

Let me know after the order is completed.

Lol idk im trying to slow down on spending at moment , i posted incase other might of tried sn then i get a review from s user before i decided lol ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Coppervape BF Split RDTA came in last week, and I think I found the perfect atty for the windowless squonker conversion of iStick 100. For those who don't know, when you squonk the Split you are refilling the ~1.5 ml tank, so squonking is infrequent, about six times only for each full bottle of juice. Other functional benefits are being able to see when you are running low in the tank, and getting the consistent hit of an RDTA rather than the ups and downs of a typical BF RDA.

There are issues with the Split, most with the plug used for single coil. Shaving/grinding it down to fit better fixed that. The flavor is excellent single coil, mainly because of its small chamber. Have not tried dual coil yet.

View attachment 621603 View attachment 621605

I thought id hsve to shave the plug down a little , since it catches the screws , on deck sides , yes i did see bf have hole into the tank also , so it refills tank not deck , but still gets Job done not built yet will do later in week , been playin with two coppervapes rta,s kfv5 an tf gt 3 both single coil both around 5mls both great flavours , kfv5 wins though , but i do like the juice flow control on tf gt 3 attached to drip tip twisting , herb kfv5 by Coppervapes yes i recommend its built very well , no markings plain ss tank , with glass and metal tank too ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[MyMagicMist]

If you like dual coils i think the included RDA is very good , for singles it's horrible but thats understandable .

Can enjoy dual or single either way here. Can build a dual deck with a single and do fair to well using it, too. All in building it good and getting the wick correct, ensuring proper air flow, keeping wick wet. Not as much trouble as it might seem or sound.

 

[MyMagicMist]

Are spare firing pins offered for these mods?

Fast Tech offers repair kits which have a screw for firing, leaf spring arm, another 510 connector. These kits run around $3 USD. The kits do not include the 510 to 10ml bottle nib assembly though. I found those on Fast Daddy's in a kit they charge about $6 USD to buy, of course Fat Daddy's kits include a good bit for that price.

 

[MyMagicMist]

The eLeaf Pico Squeeze Mod looks pretty identical to the DripBox 60W.

 

[herb]

Can enjoy dual or single either way here. Can build a dual deck with a single and do fair to well using it, too. All in building it good and getting the wick correct, ensuring proper air flow, keeping wick wet. Not as much trouble as it might seem or sound.

I tried it with a single coil and it's just not near as good with the single as other BF RDA's are , sure you can get it to work but it performs much much better as a dual coil .

Just my opinion of course

 

[herb]

Lol idk im trying to slow down on spending at moment , i posted incase other might of tried sn then i get a review from s user before i decided lol ,

Sent from my ONEPLUS A3003 using Tapatalk

I was just busting balls Benley , you are the man !!!!!

 

[herb]

Matey , dont wait , its really worth getting , its one i will definitely recommend , you can have it restricted or not , but the flavours are superior to many other RTA,s out there , it really is that good , an for 10£ im buying more to last since after may 2017 we in uk will no longer be able to buy an risk getting seized at customs , so im going to order at least 3 more 2 for family one extra for me , [emoji106][emoji106][emoji106]

Sent from my ONEPLUS A3003 using Tapatalk

Thats awesome , i need to get me one of those .

Thanks

 

[benley73]

Thats awesome , i need to get me one of those .

Thanks

These are from Gearbest good price 10£ uk GBP so a great bargin especially the build quality ,not one thing wrong with it , no leaks no drips no condensation at all ,threads are nice smooth , works as good as Original since compared to a pals he was ...... lol , coppervapes KF v5 only thing it doesn't have is the logo its logo less , which is fine for me ,
i know its a Clone an saved me 100£ from original ok you can purchase ones with logo but UK customs would steal it for that , also they nearly more than twice as much for brandings logos pointless does nothing for vape , so logo less helps me stop promoting a company that over charges since this is a 1.1 at a tenth of cost ,
comes with bag of spares Orings , a multi screwdriver key ring an metal SS tank which gives 1 ml extra capacity , but im ordering more since i enjoy it , id deffo recommend it , Ive got a new RTA Tank to test this weekend Sherman 28mm rta just Arrived ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Thats awesome , i need to get me one of those .

Thanks

I just ordered 3 more whilst i can , This is it now lol , im awaiting the no pity clone from 3f site , im awaiting some more mods ect from gearbest an such an that is hopefully tje last of my tanks rda mods im getting now i can just concentrate on Buying concentrates , since im running low of a few

Sent from my ONEPLUS A3003 using Tapatalk

 

[zoiDman]

I just ordered 3 more whilst i can , This is it now lol ...

Where have I Heard that Before?

 

[BreSha6869]

Aaaaaaand......?
How ya gonna build it?
I have it in a cart, but I often throw stuff out of the cart before I buy...

So I built dual vertical 24g kanthal coils @ 0.29ohms on the LE 86 and it is awesome. Better than my NarDA or Tsunami awesome.

Might be that my build just turned out perfect, but this is a great BF tank IMO.

Negatives? I hate slot/flathead screws/grubs and I will be replacing these with philips or hex ASAP. Also, the inside bottom of the atty isn't very nicely machined. Lastly, if you want to install horizontal coils, I strongly suggest winding them backwards/lefty. The outside posts are lower than the inside/positive post, so regular coils can be a bit of a PITA.

Amazing for $8-ish though!

 

[b.m.]

ShenRay makes outstanding quality clones .

I agree.My first one from them was the Origen little,and it is very nice,so i have a Hadaly and another Origen little both by Shenray on the way to me.