Coppervape BF Mod

[zoiDman]

That done did it ,,, I'm so stupid I was looking at those holes and wondering why they were there.
if it had been a snake ,,,,,,,,,,

For mods where you Can't adjust the 510 Height, these work very well.

KP Mod Guard - 5 Pack

 

[TheWestPole]

it appears you've shattered the record for over squonking.

Hahaha. Yeah, looks like the tank is about to burst.

 

[zoiDman]

I just saw this on FT...

$17.88 YFTK Speed Revolution Styled RDA Rebuildable Dripping Atomizer - 316 stainless steel / 18mm diameter at FastTech - Worldwide Free Shipping

Looks/Sounds like it is BF Ready. And the Reduced diameter would probably make it a Good flavor rda.

 

[woita]

3fvape has it too - Speed Revolution Style RDA Silver 316SS Rebuildable Atomizer w/ BF Pin

seems to be a clone of the "speed revolution" by luca creations

beware - the original has a 1.2mm airhole ... so mtl-only I would say

 

[zoiDman]

3fvape has it too - Speed Revolution Style RDA Silver 316SS Rebuildable Atomizer w/ BF Pin

seems to be a clone of the "speed revolution" by luca creations

beware - the original has a 1.2mm airhole ... so mtl-only I would say

Wow... 1.2mm is a Small Hole. It also looks like the Air Hole may be kinda High up on the RDA cover.

I think someone Needs to Take One for the Team and get it though. And then do a Review.

 

[woita]

there are some videos up on youtube and it seem that it's got a deep juice well. so the air-hole might end up in line with the coil.
but it still is tinyyy and it would mean the coil is right under your nose...

 

[b.m.]

beware - the original has a 1.2mm airhole ... so mtl-only I would say

Should be pretty easy to drill that hole out a bit bigger if needed though.I've had to do that on a few rda's.I want to drill out my little no toy clone,but there isn't much left between the holes to start with,so i may just turn the 3 small holes into 1 big one haha.

 

[Rathamar]

Should be pretty easy to drill that hole out a bit bigger if needed though.I've had to do that on a few rda's.I want to drill out my little no toy clone,but there isn't much left between the holes to start with,so i may just turn the 3 small holes into 1 big one haha.

Let me know how that goes and if you can snap a few pics of the process I would be very grateful.

I really want to increase the airflow on my NoToy. I love the look, i just need a little more airflow

 

[b.m.]

Let me know how that goes and if you can snap a few pics of the process I would be very grateful.

I really want to increase the airflow on my NoToy. I love the look, i just need a little more airflow

Will do,depending on if it's successful or not haha.I'm the same as you though,i really like the look of it,but the airflow is just too tight for me,so it has sat on the shelf from the first time i used it.I'm thinking i will probably use my dremel with a diamond burr or whatever it's called,and just grind the metal out between the holes,creating 1 sort of oval shaped big hole like the wide open one in the cap,that way you can still use that large hole to close it down some if needed.I will probably mess with it this weekend,so i'll let ya know how it goes.

 

[nocigsnomore]

Got it from FT a few days ago, and finally got it great when I made a 24g kanthal, 5 wraps, 3mm coil. It came shiny clean. Didn't even have to rinse the bottle.

 

[eGoinMD]

Color me impressed. Order of 2 V2 parts kits shipped on 3/25, arrived today in Maryland. Coppervape back in action!

 

[zoiDman]

Color me impressed. Order of 2 V2 parts kits shipped on 3/25, arrived today in Maryland. Coppervape back in action!

Good Deal!

 

[Highwayman1224]

Got it from FT a few days ago, and finally got it great when I made a 24g kanthal, 5 wraps, 3mm coil. It came shiny clean. Didn't even have to rinse the bottle.

View attachment 646159

You're gonna love it!! I've had mine for several months and no problems with it, great bang for the buck!!

Sent from my LG-H910 using Tapatalk

 

[eGoinMD]

Getting the Coppervape/O16 combo back in business makes me wonder how I can open up the airflow on my KFL'S to match, or at least come close, to the O16 at about 2 or maybe 3/10 in airflow openness. They will be my "really hard use"(on Kato box mods) mods.

It was a literal pain trying to squonk a kato/kayfun combo though

 

[nocigsnomore]

You're gonna love it!! I've had mine for several months and no problems with it, great bang for the buck!!

Sent from my LG-H910 using Tapatalk

Yeah it's greeeeat So light and comfortable to hold. Less is really more! Will order one more and put the Dripbox 2 in the "wasted money" box. The Goon 22mm deserves something better.

 

[zoiDman]

Here is kinda an Unusual BF RDA...

$15.61 YFTK Noname Plug-In Styled RDA Rebuildable Dripping Atomizer - stainless steel / 19.8mm diameter at FastTech - Worldwide Free Shipping

The thing that caught my Eye was that it is 19.8mm. And has a Dedicated Single Coil Deck.

What made me Smile though was the PEEK Air Flow "Ramp". I could see someone Dripping into this RDA and say'n ...

"Why does the e-Liquid keep coming out of the side hole?"

LOL

 

[badinfluence357]

Anyone modded one of these with a wood or ultem button with magnets?
I think the button is so ugly.The mod is awesome looking thanks to CCs design but the button has to go....

Sent from my LGMS550 using Tapatalk

 

[Mr47]

Wow... 1.2mm is a Small Hole. It also looks like the Air Hole may be kinda High up on the RDA cover.

I think someone Needs to Take One for the Team and get it though. And then do a Review.

Received the speed revolution style rda from fasttech today, build quality is excellent the orings are perfect, has a deep juice well and is simple to coil and wick. The air hole is 1.2mm at first I was thinking I will have to drill it out to 1.5mm at least but I have left it stock as it is a comfortable draw and the flavour is awesome it beats the notoy rda in my opinion.
Currently have 5 wraps of 26 awg kanthal on it at .64ohms and it's running like a champ, will definitely be ordering another one of these and also YFTK Strike Style RDA 18mm Black Rebuildable Atomizer w/ BF Pin as it has four air hole sizes to choose from.

 

[Mr47]

Received the speed revolution style rda from fasttech today, build quality is excellent the orings are perfect, has a deep juice well and is simple to coil and wick. The air hole is 1.2mm at first I was thinking I will have to drill it out to 1.5mm at least but I have left it stock as it is a comfortable draw and the flavour is awesome it beats the notoy rda in my opinion.
Currently have 5 wraps of 26 awg kanthal on it at .64ohms and it's running like a champ, will definitely be ordering another one of these and also YFTK Strike Style RDA 18mm Black Rebuildable Atomizer w/ BF Pin as it has four air hole sizes to choose from.

 

[zoiDman]

Received the speed revolution style rda from fasttech today, build quality is excellent the orings are perfect, has a deep juice well and is simple to coil and wick. The air hole is 1.2mm at first I was thinking I will have to drill it out to 1.5mm at least but I have left it stock as it is a comfortable draw and the flavour is awesome it beats the notoy rda in my opinion.
Currently have 5 wraps of 26 awg kanthal on it at .64ohms and it's running like a champ, will definitely be ordering another one of these and also YFTK Strike Style RDA 18mm Black Rebuildable Atomizer w/ BF Pin as it has four air hole sizes to choose from.

Very Cool.

I have had one on my Wish List. My just have to move it to the Cart.