Coppervape's Skyline Clone

[benley73]

No probs [emoji106]


Sent from my ONEPLUS A3003 using Tapatalk

 

[Mada]

Soooo, you like the Hussar better overall then ?? That's about twice I have seen that same type reaction on the Skyline. Interesting !!

Yep, after second build and different flavor , Hussar is much better 'for me'

 

[Bigbob2322]

Yep, after second build and different flavor , Hussar is much better 'for me'

I agree and juice doesn't turn dark brown in the Hussar.

 

[52anddone]

My Lemo v1 and a few others would turn juices dark after a few tanks full also. I always disliked that feature, but could never detect a taste difference, just looked bad.

 

[godfatherI]

I have to add that I have had no juice turn on me. Maybe it's my build; maybe it's the particular tank I have (ordered from CV directly). At this point, my kayfun v5s are gathering dust.


Sent from my iPhone using Tapatalk

 

[benley73]

Skyline standard on New VT 75C which has Arrived eventually ,
got for 80£ , Gearbest ,
not as cheap as the 45£ paid for chrome
VT 75 ,
Or the C1D2 VapeDroid
but hey new DNA Board
New one is a very nice slim mod either way.
Wonder if they will make an SS chromed Version of this one Id be getting a second if they did,
Im not at only 4 dna 75s
+ 2 others.
Just much more pocket friendly than my dual / triple an lipo DNA,s

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Well just installed a SS clapton took out the inserts , wicked with Rayon this time , on VT,75C , put in TC .an wow thus shines , Flavours have increased wicked it tightish , cut tails to edge of deck used my Dentist pick to stuff wicks down into juice channel just where it comes in lifted wicks a little where they enter each edge of coil , after like 8 draws to break in rayon a little ,only one Airflow open on base.

Using Fruitloops cereal mix of my own one of my favourite juices , know exactly what this tastes like from many builds an tanks ,
Id say Flavour have improved more on par with hussar now , and slightly better than Taifun GTV3 , dont usually use rayon much but since using a Clapton that heats up fast , 21.5w 427f , 0.80 ohm build
Im liking the size of this new mod a lot , thumb or trigger firing , chamfered 510 so a 22mm atomiser dont look big unlike the VT75 Original version

Its definitely drinking quite a bit ,[emoji6] ,
Will need to connect to pc see what avalible themes are out there , but overall im liking this combo more each time i use it ,
Just knocked it down to 20.5 w stop it from occasionally spitting from build ,
Gone through a tank full in 10mins [emoji39] delicious ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

A Tank full in 10 minutes ?? Are you tipping it up and just guzzling it ??

Looks like my SkyLine and 8 extra air disks have shipped from FT, so I should get them in about 3 weeks (which is a normal time frame, for me at least). I forgot to add that my Sweet-Vapes order has also shipped Aspire Cleito 5ml Fat Boy Glass Tube $3.00

I will also remember about that o-ring tip you gave out benley, thanks again for that.

 

[benley73]

A Tank full in 10 minutes ?? Are you tipping it up and just guzzling it ??

Looks like my SkyLine and 8 extra air disks have shipped from FT, so I should get them in about 3 weeks (which is a normal time frame, for me at least). I forgot to add that my Sweet-Vapes order has also shipped Aspire Cleito 5ml Fat Boy Glass Tube $3.00

I will also remember about that o-ring tip you gave out benley, thanks again for that.

Im just chain vaping away, an bam 3-4ml gone especially when my misses isnt around i can let rip,
second one is setup without Airdisk or Bubble tank so is smaller capacity, Its a good DTL draw + SS Clapton build Rayon wick so just flows
with no harsh or deterioring Vape. Can even set on higher power or higher temp, or longer draw using the small Capacity Original glass tank ,
Im happy that Filling , closing off jfc is so so much easier to do with that smaller Oring on top now,
Then only fill to just about under the top caps juice slots not right to brim ,
So this is probably why I've never experienced the juice being forced out of airflow when i open my Jfc control back up.
Where only talk a few extra drops any way to total max capacity,

Think im Going to order some more Ijoy 26650s also
since the ones i have after charge discharge cycle tests 2 are 4650 mah and other cells a little less.
Some report even higher 450mah extra is nice, Can be extra vape time when needed,

I Can go through 2-3 plus of these a day if chain vaping away on some of my nicest Flavours it feels like i could be drinking them at times lol, constant refills,
(have a lot of stress at moment with partners illness)
So better than going back to smoking,
Will picj up some restocking of concentrate too , 2 orders at different sites on for 65£ other for 80£ dont like to actually run out.
+ will then pickup
Some spare Cleito Bubble glass.
for my stash, might even pick up 3rd Husaar an skylines , will see what funds i have left after other Orders,


I m not going to be able to easily replace stuff in coming months or years with TDP,
gotta think for years to come, just received my 5 spare glass tanks for Skyline.
my 4 nano tank hussar kits ,
2 x extra 2mm
2 x extra 1.3mm posative Airflow pins for hussars ,
2 of everything is my current might need 3 lol
Since 95% vaping just single coil RTA,s now ,


Sent from my ONEPLUS A3003 using Tapatalk

 

[52anddone]

benely, you don't need to explain to me your juice usage, I was only trying to be witty, not to pry or get into your business. I agree though, stress will up your juice consumption for sure. Sorry to hear that about your partner.

You DTL, that explains it. I am a MTL tootle puffer and can go all day at 10w and under 4ml usage. Thanks again for those filling and o-ring tips, will come in handy for me.

I forgot you had to mess around with all that TPD crap over there, you have my sympathy for sure.

As soon as my FT order comes in I'll have (3) Coppervape Hussars/ (2) 1.3 air tube kits, (1) SkyLine/(1) extra 8 air disk set/(2) of those Cleito Fat Boy glass tubes. The Hussar is so Great I decided to get the SkyLine also.

 

[benley73]

DTL is just how i set this one up wanted to try a certain build an Rayon , an works well ,
Usually im restriced DTL ,MTL ,

Ive got 2 Hussar,s in use but one is just in SS tank mode,
got some home made CBD in that one would really mess up the pc tanks , thats in MTL setup ,
It helps chill me when really need it but only use it on sparingly,

just been messing with VT 75 c mod , just come across that when in TC and JFC is shut on Skyline , no matter if coil/ wick is soaked , it throws up temperature protection,
Found that pretty handy,
Tried to video it ,

but having to use mobile with one hand an use JFC ect video came out crappy ,



Wonder how its sensing that with a soaked wick , wonder if the new chip is a little more refined
Open it up a little or more an it fires,
I mean thats how TC should work ,
But I'd expect it to still fire until wick dries a little ,

Sent from my ONEPLUS A3003 using Tapatalk

 

[kiba]

Wonder how its sensing that with a soaked wick , wonder if the new chip is a little more refined

We were talking about this on evolv bc we were having to turn the temp way up or down from where we normally would, it uses the same maps & according to evolv it works the exact same way as the other dna's. At first I thought it had something to do with the battery I use in the 75c, (mine uses a single 20700) but ofc others are using different batts & same problem.

I think what you are seeing there is part of the inaccuracy some peeps (including me) are having w/ TC rn, they are working on a firmware update though... actually it might be out, put my 75c aside for a while & haven't checked, probably check tonight.

It's going to be fine though, they'll figure it out like always & as far as more refined, the Evolv way of doing TC with TFR maps is already 100% more refined than any other board, so I'm good w/ that.

Sent from my SM-G955U using Tapatalk

 

[Kusie]

Did somebody by chance measure the diameter and thickness of the inner and outer o rings in the base as shown in this image posted by @Moonwalker earlier in this thread? Like to replace them, still have some minor juice leaking problems...

 

[benley73]

We were talking about this on evolv bc we were having to turn the temp way up or down from where we normally would, it uses the same maps & according to evolv it works the exact same way as the other dna's. At first I thought it had something to do with the battery I use in the 75c, (mine uses a single 20700) but ofc others are using different batts & same problem.

I think what you are seeing there is part of the inaccuracy some peeps (including me) are having w/ TC rn, they are working on a firmware update though... actually it might be out, put my 75c aside for a while & haven't checked, probably check tonight.

It's going to be fine though, they'll figure it out like always & as far as more refined, the Evolv way of doing TC with TFR maps is already 100% more refined than any other board, so I'm good w/ that.

Sent from my SM-G955U using Tapatalk

Im not having a problem with it , as such , Its working fine,
Like i say ,
it shows up temp protection as it should when JFC is shut but id of expected maybe to get one or 2 draws before hand since the feed to the wick is turned off,
soon as open it to allow flow
It fires right away ,
Just found it interesting , since this is On the new mod/ chip

Was just wondering how the heck it knows JFC is shut ?

Like its extra sensitive or something , i actually like that it does this , kind of handy if for get to open Jfc up after having mod in pocket or such

Sent from my ONEPLUS A3003 using Tapatalk

 

[benley73]

Did somebody by chance measure the diameter and thickness of the inner and outer o rings in the base as shown in this image posted by @Moonwalker earlier in this thread? Like to replace them, still have some minor juice leaking problems...

Dont you have Replacement in spares bag ,
then you measure them ?

Sent from my ONEPLUS A3003 using Tapatalk

 

[Kusie]

Wow, yes you´re right, LOL, I didn´t think of that at all... just took out the bag, the two large ones for the upper and lower tank sealing seem to be 1,5 mm thick, and the other ones are all 1 mm... funny though as the smaller o-ring in the upper picture looks as thick as the large one, 1,5 mm... go to try that out when I wick the Skyline next time. I normally never use or care for the spare o rings included in chinese clones since they mostly are of very low quality and give a bad "burned" rubber taste...
K.

 

[52anddone]

What I have found Kusie, is that more times than not, the o-rings out of the spares bag work better than what came on the atomizer new, and I will change out a bad o-ring that came already installed with one out of the spares bag. Not all the time, but most of the time. Nowadays, I have such a stock of 1mm, 1.5mm, and 2mm that are high quality Buna-N 70D o-rings, that I just measure the ones that came on the atomizer and change them out if necessary with those. I get most of my replacement o-rings from either metric orings or Buna-N 70D O-Rings : The O-Ring Store LLC, We make getting O-Rings easy!

 

[52anddone]

At first I thought it had something to do with the battery I use in the 75c, (mine uses a single 20700) but ofc others are using different batts & same problem.

Hey kiba, how do you like those 20700's as opposed to the older 18650 betteries, do they run longer or are they just a higher amperage battery ??

 

[52anddone]

My Tracker says "Your item was accepted at 3:05 am on July 23, 2017 in CHINA." I prolly won't see it at my door till sometime in the first part of August though, but it is moving from FT at least. That's my SkyLine I'm posting about folks. After all this time I still get antsy when I have incoming vape articles.

 

[mogelwarfare]

My skyline arrived yesterday , im vaping a 1.5 ohm build @14 watts . The build im doing is 28ga kanthal @ 2.5mm .

alltough inlike the tank , its gurgling (bubbling) when i start inhaling . If im not inhaling strong it doesnt do that . Whats the reason behind that ? Do inhave a defective unit ?

I rebuild that coil 3 times , allways with gurgling , one time it was suddenly leaking . Im using cotton bacon v2 and im sure im using enoguh cotton (didnt "fluff" the ends , it sitted flush inside the coil )

Anyone has a tipp?