COV - Clouds of Vapor Giveaway Thread!!!

Status
Not open for further replies.

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
Happy Father's Day to all you dads out there...

Also, thanks for all the info on the DNA and ZNA...I wouldn't go with a kayfun or any huge tank. Very happy with my ARO and Evod tanks. They are a good size for me. How heavy is the DNA with batt? I had looked at the Z Max but PB talked about how heavy it was and same with the E LVT

I didn't put it on a scale but I say just a tad bit less than a mvp
 

Bigbuyer

Unregistered Supplier
ECF Veteran
Sep 5, 2009
3,839
1,252
Florida, USA
going to a shoot long distance this weekend.See if I can still pop the 12 x 24 steel at 1 mile.Will start with the 1000 meter target and work outwards.It'll be great to get out in the open air again.....


Ding Wins! He gets a 30ml bottle of COV4! Please PM me with your info and what nic you want. More winners coming!
 

Uncle

Resting In Peace
Supporting Member
ECF Veteran
Verified Member
Jun 15, 2011
32,527
116,452
CONGRATULATIONS

:rickroll: "Ding"/aka "Whodat" :rickroll:
(Ya' "Ding-A-Ling" - "YOU" . . .;))


AND - THANK YOU "BigBuyer"/"COV" . . .


For the contest and opportunity to enter . . .​




thumbs%20up%20smiley.gif
 

Ding

Vaping Master
ECF Veteran
Verified Member
Jul 25, 2013
8,717
12,591
Molon Labe
Getting the wick right is the hardest part. Try to keep it up off the deck, you'll end up with a lot of juice through the air hole on the deck

How so Curly.On mine I get the vertical (s) depending if I use 1 or 2 coils I just pull the cotton through one coil and weave it though the other on the second one and tuck it down into the base.On a single I just pull a length of cotton throught it and tuck the cotton around the bottom of the base.You do want a semi tight,not loose cotton wick in the coils. I think I am talking about the same thing,coil holes are going up,as in ya could look down through them instead of being sideways right.?
 
Last edited:

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
How so Curly.On mine I get the vertical (s) depending if I use 1 or 2 coils I just pull the cotton through one coil and weave it though the other on the second one and tuck it down into the base.On a single I just pull a length of cotton throught it and tuck the cotton around the bottom of the base.You do want a semi tight,not loose cotton wick in the coils. I think I am talking about the same thing,coil holes are going up,as in ya could look down through them instead of being sideways right.?

Has just been my experience, resolved by lifting the cotton up and away from the top of the building deck then back down to to the sides out of the juice channels
 

CurlyxCracker

Ultra Member
ECF Veteran
Verified Member
Jan 29, 2014
2,006
2,584
Williamsport, PA
How so Curly.On mine I get the vertical (s) depending if I use 1 or 2 coils I just pull the cotton through one coil and weave it though the other on the second one and tuck it down into the base.On a single I just pull a length of cotton throught it and tuck the cotton around the bottom of the base.You do want a semi tight,not loose cotton wick in the coils. I think I am talking about the same thing,coil holes are going up,as in ya could look down through them instead of being sideways right.?

Wait, you mean you thread wick THROUGH the coil instead of around it?
 

Uncle

Resting In Peace
Supporting Member
ECF Veteran
Verified Member
Jun 15, 2011
32,527
116,452
JUST AS AN FYI:


There is a discussion on ECF about using the "Rayon-wick" for coiling (http://www.e-cigarette-forum.com/fo...ck-better-flow-flavor-saturation-nic-hit.html) and there a lot of people that are excited about using this as a wick material . . . You can find it at "Sally's Beauty Supply" at a reasonable price it is called "CelluCotton" (I personallly know it absorbes liquids very very well - and Ya' can get it at 10' & 500' lengthens: Graham CelluCotton Cotton Coil) . . . BTW: If "You" know someone (usally a professional hairstylist/cosmetologist) with a "Sally's Membership" Card Ya' can get it even for less . . . :D

Just Sayin' . . . ;)
 

Ding

Vaping Master
ECF Veteran
Verified Member
Jul 25, 2013
8,717
12,591
Molon Labe
well some do,some don't I guess.I can fog up the house with my helios which I use the verticals on.I just drag a length of twisted cotton through each coil with tweezers,heck I don't even cut it to each coil,just one long wick through both coils then tuck the rest into the base,maybe trim the ends some.
 

Ding

Vaping Master
ECF Veteran
Verified Member
Jul 25, 2013
8,717
12,591
Molon Labe
JUST AS AN FYI:


There is a discussion on ECF about using the "Rayon-wick" for coiling (http://www.e-cigarette-forum.com/fo...ck-better-flow-flavor-saturation-nic-hit.html) and there a lot of people that are excited about using this as a wick material . . . You can find it at "Sally's Beauty Supply" at a reasonable price it is called "CelluCotton" (I personallly know it absorbes liquids very very well - and Ya' can get it at 10' & 500' lengthens: Graham CelluCotton Cotton Coil) . . . BTW: If "You" know someone (usally a professional hairstylist/cosmetologist) with a "Sally's Membership" Card Ya' can get it even for less . . . :D

Just Sayin' . . . ;)

I thought rayon was some kind of 1980's pants...I guess I can cross homie depot,my underwear and the ammo shops off the lookie list.:)
 
Status
Not open for further replies.

Users who are viewing this thread