COV Wetbox - atomizer ready (almost) - Read inside for more 510 atty details and slight changes needed

Status
Not open for further replies.

JuniorNA

Ultra Member
ECF Veteran
Feb 2, 2010
1,134
325
43
NJ
Just wanted to say that i give this little baby a 9 out of 10. It's amazing. Its simple, effective, and I have the battery and juice in 1 small box the size of a tictac box. It doesn't get any better than that. For a constant vapeman like myself, it was so annoying to have to drip liquid every 5-6 hits. Now i just have to squeeze 1 or 2 times and I'm set. No more napkins, no more juice everywhere, no more juice on hands which transfer to keyboard, mouse, phone :p

One thing I will say. Not all 510 attys will work with the wetbox. The reason is because the feeding tube assembly is too long for some atomizers, so what happens is the feed tube is touching the coil, which then grounds out the connection and the atomizer won't fire. All you have to do here is cut .25 inches of the feeding assembly and that is just enough to keep the atty from being grounded and not firing, and also long enough to still drip up to the atty on 2 or 3 squeezes. You'll know the atty is ready when you see a little juice coming outside of the 510 female connection on the wetbox.

Once you see that, (a little tad of juice coming out of the connector) your atty is ready go. I like to keep my attys flooded at all times because I can't stand the taste of burnt coil. So all my attys are debridged and dewicked which means you need to drip more...which is why I NEEDED the wetbox out of convenience...again, now instead of dripping nonstop, i just squeeze the bottle and I'm good to go.

Anyone else have an other issues with 510 attys not working?

A 2nd option if you do not want to cut the feeding tube You could also get a 801 or 901 t 510 adapter (not sure if it's 801 or 901), but basically you want a 510 male on 1 side, and a 510 female on the other...what that does is LIFT the atty about .25 inches which resolves the grounding issue. That way you can still keep the same needle length, and that will feed the juice into the atty just the same.

So you can either cut the feed tube, or get the adapter to extend the atty a little higher, both have the same results in the end.

I'm loving this thing, and the 14500 batteries LI-Ion last a good 10-12 hours....and I'm a heavy vaper, about 3-5 hits every5 minutes.

That's all I have to say! just wanted to express my feelings on how great this is, and how great COV is as a local supplier, and non local too since he's a fast shipper.
 
Status
Not open for further replies.

Users who are viewing this thread