dct 3.5ml tank on an e-power??

[deezdrama]

Been vaping for a couple weeks with cheap rechargeable ecigs from the mall....

Thankfully found ecf and got some good suggestions and ordered an e-power kit from ccv,

I also picked up extra low resistance carts, some drip tips,and some prepunched carts for the 3.5ml dct tank i also ordered.


My concern and question is.....


Will i need a special cone to use the tank on the e-power to still have a streamlined clean look???

anyone have a pic of an epower with a tank on it?

thanks in advance!

 

[mooreted]

I use a little shorty cone on mine to cover the threads. Madvapes has them.

 

[UncleHelmet]

mooreted is on point, madvapes is the only place off the top of my head for one but I have seen them on other sites, you just have to dig a little. Happy vaping!

 

[deezdrama]

Thanks guys

 

[deezdrama]

Will this ego cone thread onto my e-power?

eGo Chrome Cone for the 3.5 mL Dual Coil Tank Cartromizer

 

[mooreted]

This is the one I have:

Silver eGo Shorty Cone

 

[Warren D. Lockaby]

Will this ego cone thread onto my e-power?

eGo Chrome Cone for the 3.5 mL Dual Coil Tank Cartromizer

I could be mistaken but I don't believe it will work / fit an E-Power. You might want to contact Madvapes to check, but I have an E-Power 14650 and AFAIK the threading isn't the same (nor, I believe, is the diameter of the unit). Anyway IMO you still have a superior PV in the E-Power, by virtue of the fact that it uses non-proprietary batteries, plus it is a regulated 3.7 volt unit. I love mine!

Best of luck, & Happy Vaping!

 

[deezdrama]

ya, from my research people are saying they are different threads, but then others with an epower told me they personally use shorty cones from madvapes with a tank on there epower.

worst case scenario, ill get the dremel out n remove the threads and have a slide on sleeve... that would work right? its just there to cover the threads and gap between bat body and the tank.

i ordered one of each 4 styles they had, we will see when they arrive i guess

 

[deezdrama]

ya, from my research people are saying they are different threads, but then others with an epower told me they personally use shorty cones from madvapes with a tank on there epower.

worst case scenario, ill get the dremel out n remove the threads and have a slide on sleeve... that would work right? its just there to cover the threads and gap between bat body and the tank.

i ordered one of each 4 styles they had, we will see when they arrive i guess

 

[mynameisrob]

I also did not think the short cone would fit on the E-Power. The E-Powers threads and battery tube are both wider than the eGo/kGo threads and tube, so I dont see how it would fit.

To answer your other question though, the cone for the 3.5ml tank does NOT fit on an E-Power, and Im 100% postitive about that. Heres the same cones for the tanks from Hoosier. They sell the 3.5ml one like the one you posted, and also sell the 6ml one.
Adapter for Dual Coil Tanks
If you click on the link, and look at the description for them, It says (does NOT fit E-Power).
The tank cones have the same threading as the eGo shorty cones, so thats why I dont see how the shorty cones will fit on the E-Power, but these wont.

Oh and I know you asked if anyone had a picture of what the 3.5ml tanks look like on an E-Power.
Here ya go:
As you can see, I dont use anything to cover the threads. I do agree that the shorty cone would look nice, but personally I dont care that much.
The left one is a black E-Power with a regular 3.5ml tankand a Ressurector in it.
The right one is a Stainless Steel E-Power with a 3.5ml tank that has polished chrome end caps and a Ressurector in it.
Both E-Powers also have the Big-Belly Drip tips on them, which are nice on the tanks bc they stop the tank from being able to slide up since the bottom of the drip tip is slightly fatter than the carto.

Hope this helps!

 

[deezdrama]

I also did not think the short cone would fit on the E-Power. The E-Powers threads and battery tube are both wider than the eGo/kGo threads and tube, so I dont see how it would fit.

To answer your other question though, the cone for the 3.5ml tank does NOT fit on an E-Power, and Im 100% postitive about that. Heres the same cones for the tanks from Hoosier. They sell the 3.5ml one like the one you posted, and also sell the 6ml one.
Adapter for Dual Coil Tanks
If you click on the link, and look at the description for them, It says (does NOT fit E-Power).
The tank cones have the same threading as the eGo shorty cones, so thats why I dont see how the shorty cones will fit on the E-Power, but these wont.

Oh and I know you asked if anyone had a picture of what the 3.5ml tanks look like on an E-Power.
Here ya go: View attachment 83656View attachment 83657
As you can see, I dont use anything to cover the threads. I do agree that the shorty cone would look nice, but personally I dont care that much.
The left one is a black E-Power with a regular 3.5ml tankand a Ressurector in it.
The right one is a Stainless Steel E-Power with a 3.5ml tank that has polished chrome end caps and a Ressurector in it.
Both E-Powers also have the Big-Belly Drip tips on them, which are nice on the tanks bc they stop the tank from being able to slide up since the bottom of the drip tip is slightly fatter than the carto.

Hope this helps!

seems your correct about them not fitting acording to that description, too bad i already ordered 3 of em from madvapes, the beveled shortycone,and the straight shorty cone, and the shorty cone made for the 3.5ml tank,

I guess I will just see if i can dremel out the threads and use it as a drop or slide in cone to cover the threads, ill let u guys know how that works out. I did also get a couple of the big belly driptips.

I cant beleive noones making a shorty cone for the e-power, maybee I should of just ordered a standard e-power cone and shortened it, I might try that with my e-power cone anyway and then just order another one to have a fullsize one onhand if im not using the tank.


Thanks for the pics, they look great!

 

[deezdrama]

double post sorry