Also a double PCB with 3A limit Protection Circuit Module (PCB) for 7.4v Li-ion (18650/18500) Battery Packs (2Round)
- Status
I definitely agree with the idea of adding protection. I just do it with a simple zener cutoff circuit. Also the NoEgo's cut off at 3.5V. For a 3 cell pack I will have to run them down unprotected to see how they drain to figure out a safe zener voltage ratting to use. Using a simple 9.6 V base will be too low as the cell closest to the negative will drain more so it could run lower than 3.2V wile the one on the positive side is still around 3.5V. I am guessing 10V ~ 10.2V cutoff for 3 cells should be good.
I agree that VV is a nice way to hit the "sweet spot" and that it doesn't have to be changed around much, I was only saying that running 4AA's is pretty much where my spot is, so I don't need (at the moment) to bother with VV... Yeah, they're big and clunky - my current PV is a 4AA box with a 2AA box glued to it to hold the switch, LED and atty connector - but I kinda like it that way, as it definitely prompts a lot of "what the $(&^ is THAT?" questions and gives me an excuse to evangelize
Fear not though, I'm sure that as the disease progresses, I'll eventually wander into VV territory, if for no other reason than to be able to say I've been there done that
BTW, I've gotta say, you've been quite the inspiration for me WRT coming up with ideas for "out there" mods - keep it up!
....... Yeah, they're big and clunky - my current PV is a 4AA box with a 2AA box glued to it to hold the switch, LED and atty connector - but I kinda like it that way, as it definitely prompts a lot of "what the $(&^ is THAT?" questions and gives me an excuse to evangelize
Get a DoD dripper setup to put on top, people leave you alone, "umm, crazy person -- very bad medicine!!"
) And they don not have to be big and clunky, flashlight mod is possible and very easy, and
it keeps nurse Crachet from sticking needles in me.
Attachments
Get a DoD dripper setup to put on top, people leave you alone, "umm, crazy person -- very bad medicine!!"
And they don not have to be big and clunky, flashlight mod is possible and very easy, and
it keeps nurse Crachet from sticking needles in me.
Dang, Stosh! I never did anything with my flashlight! (now where'd I put that thing........
Dear Gummy,
Just stopping in for my checkup after your admonishment on the B&D Screwdriver thread. You'll be happy to know that this afternoon I just received a fresh batch of 510 connectors from Madvapes to replenish my stock (bonus, I ordered the regular ones, got the pre-wired ones instead... harder to keep intact in my pocket though). Now I'm actuvely on the hunt for items to mod that won't get me in TOO much trouble
Still trying to figure out how to work with FEMO clay well enough to be able to make a mod out of it... I'll keep you posted on my progress...
Just stopping in for my checkup after your admonishment on the B&D Screwdriver thread. You'll be happy to know that this afternoon I just received a fresh batch of 510 connectors from Madvapes to replenish my stock (bonus, I ordered the regular ones, got the pre-wired ones instead... harder to keep intact in my pocket though). Now I'm actuvely on the hunt for items to mod that won't get me in TOO much trouble
Still trying to figure out how to work with FEMO clay well enough to be able to make a mod out of it... I'll keep you posted on my progress...
dear gummy
there is a serious problem on this thread. apparently there is an ecf member running around here with a pocketful of 510 connectors who joined over a year ago but only has 22 posts to his name. this cannot be allowed!
would you please notify nurse cratchet that some acute intervention is needed!
there is a serious problem on this thread. apparently there is an ecf member running around here with a pocketful of 510 connectors who joined over a year ago but only has 22 posts to his name. this cannot be allowed!
would you please notify nurse cratchet that some acute intervention is needed!
I'm on it,,,
Normally I would just excuse it as being to busy modding to post but, He repaired the potential mod instead of modding it.
Alright Hambone,
Get with it,,,,,,, either mod something or post something, and frankly we really don't care which.
"Do something, even if it wrong" (or not, it's up to you)
Normally I would just excuse it as being to busy modding to post but, He repaired the potential mod instead of modding it.
Alright Hambone,
Get with it,,,,,,, either mod something or post something, and frankly we really don't care which.
"Do something, even if it wrong" (or not, it's up to you)
LOL I'm working on both... managed to get up over the 25 post mark now, and am busy working on the plans for my next mod it's funny, I never knew about the ECF Veteran thing on the day of my anniversary (yesterday) and was sad to find I didn't quite qualify... I'll get there shortly though!
it's funny, I never knew about the ECF Veteran thing on the day of my anniversary (yesterday) and was sad to find I didn't quite qualify... I'll get there shortly though!
LOL I'm working on both... managed to get up over the 25 post mark now, and am busy working on the plans for my next mod
Just another ~50 posts
That's only, what.....200% more than you have now?
Or maybe I should've asserted that the problem will be rectified... now where did I put those diodes?
Oh and another thing, I was pumping gas into my car yesterday and looked down and noticed a 10 ohm 5 watt resistor just lying there on the ground... of course I immediately scooped it up... Is that find a sign? Oh wait this is the doctor's office, I'll have to go ask on the Gummy's Psychic Readings thread
Oh and another thing, I was pumping gas into my car yesterday and looked down and noticed a 10 ohm 5 watt resistor just lying there on the ground... of course I immediately scooped it up... Is that find a sign? Oh wait this is the doctor's office, I'll have to go ask on the Gummy's Psychic Readings thread
Dear Psychic Readings,
Yea you got it alright. I was wondering there for a while but, when you start looking on the ground at gas stations for mod parts,,,, well nuff said.
Yea you got it alright. I was wondering there for a while but, when you start looking on the ground at gas stations for mod parts,,,, well nuff said.
LOL I'm working on both... managed to get up over the 25 post mark now, and am busy working on the plans for my next mod
hambone, if you got a minute to spare pop in over here
http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/111512-pre-veteran-thread.html
we'll make sure to up your post count in a jiffy - then you can return to doc gummy's office as a bona fide veteran
Hold on Tibs, Nurse Cratchet has him hooked up to her peddle powered EV at the moment.
ha! glad to hear somebody is doing something - even if it's nurse cratchet - to get hambone up to par!
1/12th of a post per day - who ever heard of such a thing
1/12th of a post per day - who ever heard of such a thing
Mad modded her stationary Exercise Bike to a generator to run her pass through.
Now all my Patients get their check up and Exercise all in one visit.
(Except for Tomcatt, he refuses to peddle it)
Now all my Patients get their check up and Exercise all in one visit.
(Except for Tomcatt, he refuses to peddle it)
Wait!! She told?....she wasn't supposed to tell anyone....dangit!!
gonna be a lot of modders mad at me now....
at least I can outrun them after the excercise bike treatment...
Last edited:
I'm more of a double-bogey player
Oooh that gives me another idea... a combo PV/putter... or maybe a PV golf tee... hmmm, wonder if I'd have enough room for a booster in a tee?
I'm more of a double-bogey player
You could always mod your range finder.
- Status
Similar threads
