Did someone tried new E2 R3 cartos in AVS/AFS?

[rusalka]

What you need is something to throttle the flow. IMHO

 

[Mauvemarauder]

They worked for about 30 mins then flooded really bad hot juice in mouth. Sorry for not updating.

Im really happy about Imeo's 510 adapter assembly. IM ordering 2 as soon as there available.

If 901's were the only atty to use ... I still would be happy with the best ecig in the world.. Nothing can touch it... the GGTS with AVS... FACT

Hi Mr. Mad,

I'm not familiar with the E2 Cartos, but I did see some design sketches. Since you are now feeding it from the bottom, maybe you should try plugging the two filler holes on top. If you can trap air in the carto where the liquid is stored, it may just help prevent overfill...

I forgot to mention you may have to partially fill the carto with some "primer" liquid before plugging the holes for it to work...

 

[HoPeFuLLL]

Got my revision 4's today. Ordered SS...they put SS stickers on them sigh...

Got the highest ohm ones they had, those run too hot at 6.4/7.4V for me but initial impression in AVS is they are nice on 3.7V...

See how they are in a few days.

 

[HoPeFuLLL]

E-liquid Web Shop CN 100 PCS 510 Empty C-E2 Cartomizers Is what I ordered. Was supposed to be 3 to 3.2 Ohms which were fine for me on HV with previous generations. Measured mine and they are 2.8 ohms and too hot even with 6.4V.

You have to vape these a little differently than previous Gens, more hold the power on for a sec and draw the vape in slowly. Trying it on my PT now and I think 5V may be the 2.8 ohm sweet spot.

 

[Mist_Of_Joye]

E-liquid Web Shop CN 100 PCS 510 Empty C-E2 Cartomizers Is what I ordered. Was supposed to be 3 to 3.2 Ohms which were fine for me on HV with previous generations. Measured mine and they are 2.8 ohms and too hot even with 6.4V.

You have to vape these a little differently than previous Gens, more hold the power on for a sec and draw the vape in slowly. Trying it on my PT now and I think 5V may be the 2.8 ohm sweet spot.

Gary, if you want something that almost replicates the 5V, try the 3V CR2 800Mah (green) like those you sent to me. After a long experience with these batteries, I find their output really suitable as is the mellow 5V vaping.

 

[HoPeFuLLL]

Well I think I need to settle for something and make it work for me (plus have 100 of these things). Asking them if it's possible to order 100 with split resistances. Lower would be great for 3.7V, higher for 6.4V..... Why am I stuck in the middle

 

[mwa102464]

I just got a shipment just this second of the latest CE2R4's 200pcs they resent me an order to replace the last batch of CE2R4's that where just bad, the ones to Get guys are the 2.8-3.0 ohm,,,, These also are just not made to perform at 5-7v because of how they are built they just dont work like a regular 3ohm carto your used to popping on your GGT and hitting it with 6v. Anyway I will be trying this newest batch today and will report back my findings, if they work like they should you should be able to put these in your tank and run them at 3.7 and with the new 510 connector as tall as the XL's are they should be fine and stick up plenty high enough or use the smaller one with the mouth piece.

 

[HoPeFuLLL]

They run very nice on 5V.......... Above that, yes they suck. But they would be better being a bit lower resistance for 3.7V.

 

[Thierry-P]

To use it in the AVS you make a hole?
Where?
Witch diameter?

 

[mwa102464]

I'm using a meter and a variable voltage Mod, and I cant agree that the taste is any good at 5v on any of the CE2's I have used, I have every ohm and the highest I can go with still having very good taste is only to 4.2-4.5 MAX and this is under a meter and on a VV mod so I just cant agree with 5v. you will get good vapor but the taste is bad at 5v in my opinion as these CE2's burn very hot even at 3.4-3.7, Hopefulll and I don't always agree anyways , right Hope

Thierry-P I'm not sure any hole is needed if you have the 510 connector that Imeo has just put out if your using the CE2 Cartos in the tank, I will be testing these newest ones I have later tonight and will report back using the new connector. I will try it many different ways as I have plenty of version of these CE2R4's, I will say the vapor seems to be much cleaner of a vape with these CE2's then the standard filler cartos.

 

[mwa102464]

I'm just gonna say it again these CE2 Carto's are not made for HV Vaping and the ohm rating on these is different because of how they are made, they do not run the same as a filler carto, so if you have a 3ohm CE2R4 carto it will not perform the same as a 3ohm filler standard carto because of the build difference and how all the fluid sits in these newer cartos also simply because they have a wire bridge up top wrapped around the silica compared to a wire running up the middle of the filler cartos so its just not the same and really no comparison to a filler carto its just completely different. The 2.8-3.0 CE2R4 I have found is also the best one made over the 3.0-3.2 & the lower resistance one that is around 2.4-2.6ohm ,,,,the 2.8-3.0 just seems to out perform the other ohm ratings in the XL series which is all I also use because the smaller ones I just dont like at all.

 

[HoPeFuLLL]

What resistance are the 2.8-3 given that the 3-3.2 is 2.8. If mine were 3.2 I can see no reason they wouldn't be fine at 6.4V but alas they are not.

I'm using a meter and a variable voltage Mod, and I cant agree that the taste is any good at 5v on any of the CE2's I have used, I have every ohm and the highest I can go with still having very good taste is only to 4.2-4.5 MAX and this is under a meter and on a VV mod so I just cant agree with 5v. you will get good vapor but the taste is bad at 5v in my opinion as these CE2's burn very hot even at 3.4-3.7, Hopefulll and I don't always agree anyways , right Hope

Thierry-P I'm not sure any hole is needed if you have the 510 connector that Imeo has just put out if your using the CE2 Cartos in the tank, I will be testing these newest ones I have later tonight and will report back using the new connector. I will try it many different ways as I have plenty of version of these CE2R4's, I will say the vapor seems to be much cleaner of a vape with these CE2's then the standard filler cartos.

And you do realize a 5V PT is probably around 4.5V under load?

 

[K24A3]

I have to agree that CE2 carto's dont like high voltage. My CE2 carto's measured at 3.2ohm easily burn using a 3.7v KR808 battery from V4L.

A phatt 3.7v battery in the GG may be ok. I'll give it a try in the GGTB when I receive 17650 batteries.

 

[mwa102464]

K24A3 glad you see it the same as me, the older ce2r3's where junk,, the latest revision just let out the newest CE2R4's in the 2.8-3.0 ohm are by far the best ones out on the market yet and I mean the latest released. I doubt you will ever get 6v-7v out of any of them, and as for hopeful yes I realize there is a difference from being under load and not being under, you said you where using them at 5v, even 5v under load is to high, at least for me and all the beta testers in the Tech talk thread for the CE2's it is, Trust me get the 2.8-3.0 ohm XL Cartos if you order more, I made the same mistake and ordered the lower resistance and the higher resistance ones a ways back, you might as well trash those you have there worthless in my opinion

 

[HoPeFuLLL]

What is the actual resistance of the 2.8 to 3 ohm MWA? Like I said 3 to 3.2 are 2.8. I'm aiming down to 3.7V and wonder if 2.8 or 2.6 be better in the normal 510's. At 2.8 I do not find them good enough for 3.7 but in spite of what you two say they are fine at 5V. They are good on fresh 3.7 batts but drop off too quick.

Do XL vape differently to a normal V4 510 ?

This is all in the AVS using cappys 510 mod.

 

[mwa102464]

What is the actual resistance of the 2.8 to 3 ohm MWA? Like I said 3 to 3.2 are 2.8. I'm aiming down to 3.7V and wonder if 2.8 or 2.6 be better in the normal 510's. At 2.8 I do not find them good enough for 3.7 but in spite of what you two say they are fine at 5V. They are good on fresh 3.7 batts but drop off too quick.

Do XL vape differently to a normal V4 510 ?

This is all in the AVS using cappys 510 mod.

Yes an XL seems to work better than the smaller regular size ones in my opinion, there is way more wicking material in an XL and more than double the liquid in the carto, for me the smaller one are worthless. Also if you go to the tips and tricks thread on these I beleive you will see the mod I made of an XL in a regular 6ml bottle of liquid and me running it like this on my Omega mod, what a crazy mod, take an XL CE2R4 out of the tube, cut a half inch of the tube and re install it then stick it in a bottle of juice with a drip tip on the other end and attach to a mod, it is crazy but works like a charm

Gary I don't know exactly what ones you have, however I only use the XL's the smaller ones are worthless to me especially only holding .8ml's of liquid compared to 1.8 of liquid in the XL version,,, I have had every single kind of these CE2' cartos and every single one of them has dialed in right in the stated ohm rating they should be 2.4-2.6, 2.6-2.8, 2.8-3.0 and 3.0-3.2 every single one has been with in its stated ohm rating. I also just yesterday received another big load of the latest released version of the CE2R4's and this load of them is a whole nother animal compared to the last load of CE2R4's I had, I had the 2.6-2.8 & 3.0-3.2 and all of those sucked, these newest ones are XL 2.8-3.0 ohm and are way way way better then the last batch of version R4,,,, From what I have seen, tested, dissected, and everything I have learned from my own test and some others, this latest batch, and of the 2.8-3.0 ohm are the ones to get and have, and I totally agree because they are just performing way better so far from me. I haven't had the time to test everything as I have wanted to yet, especially putting them in my tank, I am going to try to get one or two in the tank by tonight and I will report back my finding, I don't believe a hole will be necessary simply because of the new 510 connector should allow all the liquid I could want bottom feed right into these babies. I will report back tonight my findings.!

 

[HoPeFuLLL]

Well mine are new too... Resistance wrong..


Normals are fine in the AVS, just mine are the wrong reading for 3.7 (but fine on 5V). They do not need a hole.

Mathew, as a GG AVS owner these discussions are about using the Cartos in an AVS... Please read the topic.

You have now made 5 wall of text posts without actually trying them in your AVS...... I'm making these posts not to discuss things with you (who hasn't even tried them) but to pass info onto others. Please try them in an actual AVS for a few days...

 

[Thierry-P]

Thanks mwa, you use 510 XL E2R4 with the new connector in the AVS and it work without hole.
Best version for 3.7 v is 2.8 - 3.0 omh.
I was thinking you spoke about the KR808D version....
The 510 XL is not to long for the mouthpiece?

 

[HoPeFuLLL]

He hasn't tried it in his AVS....

 

[HoPeFuLLL]

Ordered the rest of their range in XL and normal today... Lets see how they go.