Digiflavor Z1 SBS 80W Siren V3 GTA Kit

[Frenkyou]

Digiflavor Z1 SBS Siren V3 GTA Kit
After a long wait Digiflavor returns to give news of itself and does so with a new entry level Kit which consists of an attractive mod SBS and the renewed Siren V3 tank MTL to continue the traditions of its lucky ancestor Siren V2.
Enjoy the reading.

The outer sleeve of the cardboard packaging has on the front; The name of the device (Z1 SBS Kit), its image and color indication (Black / Abalone Shell).
On the back we find an introduction on how the Digiflavor Z1 SBS Kit was made (aesthetically), but also a brief mention of the aromatic qualities of the MTL "expert" tank Siren3 GTA.
Also on the back of the box are all the main features, the packing list, a serial number, the scratch & check, logos / brands and the address of Shenzhen GEEKVAPE Technology Co, Ltd. in the form of an icon.

Package Included:
1 x Digiflavor Z1 SBS 80W Kit
1 x USB Type-C Cable
1 x Replacement straight glass
1 x Cotton Bag
4 x MTL 4-Core Fused Clapton Coil Ø2 NI80 1.2Ω
4 x MTL Fused Clapton Coil Ø2.5 SS316 1.0Ω
4 x MTL Fused Clapton Coil Ø2.5 SS316 0.65Ω
4 x MTL Clapton Coil Ø2.0 NI80 0.5Ω
1 x Spare part bag (Screws, O'ring and multifunctional screwdriver)
1 x User Manual

Kit features:
• Kit dimensions: 105.7x49x25mm
• Kit weight: 230g (18650 battery included)
• Powered by a single 18650 battery (not included)
• Power range: 5-80W
• VW / VV / Bypass mode
• Output voltage: 1-8.5V
• Resistance range: 0-1-3Ω
• Charging Port: Type C
• OLED screen
• Siren V3 GTA dimensions: 24x69mm (Drip-Tip included)
• Siren V3 GTA weight: 75g
• Siren V3 GTA capacity: 4.0ml
• Top filling system
• Postless High Stand rebuildable deck
• Adjustable bottom airflow

Available colours:
Black & Abalone Shell, Silver Gray & Stabwood, Black & Stabwood, Silver Gray & Scallop Shell.

First impressions:
I was immediately impressed to discover how well the packaging is particularly rich in spare parts and accessories, there are even 16 Coils to regenerate the new Siren V3 at will!
Wanting to nitpick, I would say that a replacement Drip-Tip is missing in the rich package, in fact the standard one is extremely large and in the overall compact line of the Device it appears out of place, luckily the Drip-Tip 510 is replaceable at will.

To learn more about this new Kit I took the Aspire Mixx (a very similar and equally captivating SBS) from the drawer to compare it directly to the new Digiflavor Z1. The first visual differences seem essentially relegated to different decorative choices.

To the touch both Mods instill an excellent feeling of quality and robustness, the corners of Digiflavor Z1 appear slightly smoother, while the dimensions are almost identical.
Wanting to investigate thoroughly, I exclude the atomizers (Siren V3 and Nautilus GT mini) and I go to weigh both Mods.
And here is the most relevant surprise, that is the weight ... The Z1 Digiflavor SBS wins big in this respect, in fact with a saving of about 50g it clearly improves what was perhaps the only limit of the beautiful Aspire Mixx SBS. So after a substantial draw, the best portability due to the significantly lower weight, earns Digiflavor Z1 SBS (in my personal ranking) a precious little point.

The lateral aspect of Digiflavor Z1 is characterized by the type of decorative insert which can be in stabilized wood or "multicolored shell", will the latter be a real shell? I am not given to know, it will probably be IML or something. In relief on both sides there is also a plate screwed with two torx screws that bears the words "Digiflavor".

 

[Frenkyou]

On the front half-height we find the square-shaped Fire key with red borders, the small screen with OLED display and the adjustment keys "+" and "-" , this keys have the same shape but are smaller.
On the back, the appearance is the classic one of SBS systems with much of the casing enclosing the cell that remains visible. At the top near the cap there are 3 large decorative slits.

The cup is screwed to the mod via two torx screws and the pin is floating, I noticed that compared to other SBS systems the atomizer is positioned rather low on the Z1, probably with very short TPD atomizers the long original Drip-Tip in this case could be useful and therefore have a practical sense.

The battery cap in the Z1 is full, i.e. the mod has no ventilation slots at the top but only at the bottom and in a safe position.
The cap has the "-" symbol inside, the compartment / battery on the bottom has the "+" symbol indicated, the pin is self-adjusting to facilitate the operation of tightening the cap when closing.

On the bottom of the Mod we find some words laser engraved and 3 vent holes .
Usb-C charging socket is located in this area * It is not recommended to use the built-in USB charging function on mods that use replaceable lithium-ion cells, lithium-ion batteries must be charged in a balanced way using a charger appropriate exterior to avoid unnecessary risks.

Siren V3 GTA tank MTL:

The Siren 3 GTA (except for the huge metal Drip-Tip), in the external appearance and in the volume has practically remained unchanged. The Tank is built in stainless steel with a diameter of 24mm and a height of 44mm, the capacity of 4.0ml is slightly less than that of the predecessor (4.5ml).

The air flow towards the Coil has not changed, under the Coil there is an insert with three holes, thanks to which the flow is uniformly directed, however the deck of the Siren 3 RTA has undergone some slight changes; that is, it has become much more convenient to tighten the screws after inserting the Coil, because the screws are now located on the top of the turrets and not on the side, furthermore the base itself is less raised than the bottom, this leads during the cutting of the cotton to a shorter length of the mustache.

The refill takes place by rotating the top-Cap which has the "bayonet" coupling, the refueling slots are quite large and are comfortable.
On the bottom are the usual laser engraved lettering and the slightly protruding gold-plated contact pin.

Externally on the bell you can see the modified logo and a different and more marked type of knurling on the Top-Cap. The bell inside maintains substantially the same volume as the previous one, but has a more flattened and compressed upper profile.

The supply of spare coils is particularly rich, in fact Digiflavor has inserted 16 pre-assembled coils in a beautiful package with 4 compartments, it is a pity that all the coils are rolled upside down.

As can be seen from the images below, regenerating the Tank Siren 3 is even easier thanks to the new position of the clamping screws / coil.
However, the supplied coils should be rewound so as not to find them too close to the bottom of the deck, in fact, due to how they have been rolled, the legs are facing downwards. To get the right distance (coil / deck) it is much better to keep the legs facing upwards, especially with the use of Ø2.5mm diameter coils.

Air is drawn in through a row of five holes on the AFC. The tightening of the Puff is regulated by two different air intakes; one oval and one round. With their help, it is possible to open both one and more air intake channels, this allows you to set a fairly precise draft for the MTL vape.

Z1 SBS Mod:
The small display (VW option) shows some information such as: Volts, ohms, graphic level of the residual charge and power, despite the small size the characters are quite visible and illuminated.
Let's now see the functions and instructions for use with the relative key combinations for setting.

- Power On / Off: Press the Fire button 5 times in quick succession.
- Power regulation: The increase / decrease is 0.5W at a time.
- Menu Mode: Press the Fire button three times to access VOLT, POWER AND BYPASS modes. Press the "+" and "-" buttons to move, press the
Fire button to confirm.
- Display Lock / Unlock: Press the "-" button and the "+" button simultaneously for 2 seconds.
- Delivery lock: With the screen locked, press the fire key 3 times in a row, do the reverse operation to unlock the fire key.
- FW version information display: When the device turns off, press the "-" button and the "+" button at the same time, the current FW version information will be displayed.
- Factory reset: When version information is displayed, press the buttons simultaneously; Up, Down and Fire, the screen will show "Config Reset!" The system will then restart.
- Screen standby: After 10s of inactivity, the device will enter standby mode.

Notifications and protections:
- Timeout of 10 seconds: The duration of the single Puff is greater than 10s.
- Low Battery: When the battery voltage is less than 3.2V.
- High Temperature: The temperature exceeds 65 ° C before use and the temperature exceeds 80 ° C during use, the device displays "Overheath".
- Resistance Prompt: When the device detects a new resistance it is necessary to press the "-" or "+" button to confirm.
- Locked Prompt: The device has been successfully locked, the screen displays Locked.
- Unlock Prompt: When the Fire button has been successfully unlocked, or all buttons are unlocked, the device will display Unlock.
- Open Circuit Prompt: When the atomizer is not connected or when the coil is disconnected, the device will display Unlock.
- Short Circuit or Low Resistance Prompt: When the atomizer is shorted or the resistance is too low, the device will display Atomizer Short.

Digiflavor Z1 SBS Siren V3 Kit worth buying? The changes to the Siren V3 MTL RTA are not so significant, in practice in use it seems to me to perceive a slightly higher amount of Hit, the excellent performance in MTL remains substantially unchanged as well as the good level of silence and the excellent reliability against the liquid leaks.
So in case you own the predecessor Tank, you will appreciate in the V3 a facilitated regeneration and a slightly different appearance, probably also a better feeding of the cotton which is now located closer to the bottom.
If, on the other hand, you are looking for a fairly light SBS Mod, very nice, economically interesting and equipped with essential operating modes, the Z1 SBS certainly could please you.

Thanks for reading.

On the sourcemore website it is possible to get this Kit at the price of $ 51.18 approximately € 43.01 by applying the coupon Code ： Z1SBS
Digiflavor Z1 SBS Kit 80W Box Mod with Siren3 GTA