DIY juice. I need help Please.

[Mr.Self_Destruct]

Hi, I just received some DIY supplies today. I have 36mg PG and some VG. I only have 3ml of seedmans Virginia Fire cured.

I can't figure out these calculators and I'm not sure how much flavoring to add or how to get it to 12mg/ml.

I want to make my own tobacco flavors. I don't know how to get the info I need. I would appreciate any suggestions on tobacco flavors and how to use them. I want to place an order in a few days.

I'm very excited to make my own juices.
Thank you in advance.

 

[Springbird]

Do you have a preference concerning the PG to VG ratio you vape? I use Scubabatdan's calculator and am not really familiar with any other. I don't use Seedmans so I don't know how much to add. But you should check out this thread.
http://www.e-cigarette-forum.com/forum/diy-e-liquid/42135-tobacco-flavors-u-s.html
Once you know what PG/VG ratio you want and what percentage of flavoring you should use, download Scubabatdans calculator from the stickie at the top of the DIY subforum. If it still doesn't make sense repost specific questions and I can try to answer.

 

[Mr.Self_Destruct]

Do you have a preference concerning the PG to VG ratio you vape? I use Scubabatdan's calculator and am not really familiar with any other. I don't use Seedmans so I don't know how much to add. But you should check out this thread.
http://www.e-cigarette-forum.com/forum/diy-e-liquid/42135-tobacco-flavors-u-s.html
Once you know what PG/VG ratio you want and what percentage of flavoring you should use, download Scubabatdans calculator from the stickie at the top of the DIY subforum. If it still doesn't make sense repost specific questions and I can try to answer.

Thank you for the link.
I have that calc downloaded and I don't fully understand it.
Ideally I would like a 70PG/30VG or 50/50 mix but right now I don't have any PG without nic.

 

[Springbird]

How many mg/mL is your nic base?

 

[Mr.Self_Destruct]

How many mg/mL is your nic base?

My base is 36mg

 

[Lee1111]

You want to pay attention to section 4 and section 5. Section 5 should be all you need. just put in 0 mg for one of them and the other one put in 36 mg and it should fix you up.

 

[Springbird]

You can get really close to a 60 PG/40 VG mix with what you have if you have some no nic VG. Go to the PG calculator tab on the bottom of Dan's workbook.
In base nic put 36
In target PG nic put 12
In amount to be made put 5 (always start out with small batches)
In water/pga put what you want. Try 6%
In flavor put what ever percent you are using

Now In section 2 you should have a list of what needs to be put in the juice.
You don't have the .13 of PG but is such a small amount it won't change things much you can add .1 of VG to keep the nic at 12%.

 

[Mr.Self_Destruct]

You can get really close to a 60 PG/40 VG mix with what you have if you have some no nic VG. Go to the PG calculator tab on the bottom of Dan's workbook.
In base nic put 36
In target PG nic put 12
In amount to be made put 5 (always start out with small batches)
In water/pga put what you want. Try 6%
In flavor put what ever percent you are using

Now In section 2 you should have a list of what needs to be put in the juice.
You don't have the .13 of PG but is such a small amount it won't change things much you can add .1 of VG to keep the nic at 12%.

So can I use regular filtered water?
Any tips for measuring?
I have a 5ml syringe.

@Lee1111, thank you too.

 

[Springbird]

You should use distilled water unless your filter removes minerals. You can get distilled water at the grocery store or pharmacy. I use a 14 gauge blunt tip needle on a 12 mL syringe. 5ml will do just fine.