that's weird. it lasts much longer than single hg2 in dna40. plus it charges in about 2 hours. no clock just a guess but I have kept an eye on it. well I guess increased voltage does increase watt hours? I have no idea. however the voltage does not look higher in battery monitor. again, have no idea what I am looking at. I appreciate you answered the question.
DNA 200 Watt
- Thread starter MegaVap
- Start date
- th_trl_thread_readers 0
- Status
yer relo dna 200 charges in about 2 hours from completely dead? i tried that once and it took about 6-8 hours if i recall. that was a few days ago and i'm still on the same hg2 batts. i'm at 31% charge. pretty nice
yeah. not even kidding. I couldn't believe it myself. i did check the clock. it was weird charged quickly but last drop took longer than the first 95%. I have the meter in field 2. maybe they upped new ones to 2 amps? doubt that. these just came in a few days ago. he sold six in 5 minutes. in another thread they are talking about the end of vaping. one thing holds true these shopkeepers already made their money. this guy has lines outside for new stuff. 3 weeks ago it was the effusion. he sold 25 in less than an hour. plus constantly selling expensive juices. damn why didn't I do this? I heard one shop makes half a million a week! that is like getting to amazon levels. well no but still.
huh weird. ya better get real good real fast at DIY juice making. cause i think, but i hope im wrong, we are f@#$%d when it comes to the ban being enacted. sucks cause i love vaping every aspect of it, from the innovation coming from mod makers down to the cotton i put in my coils.
I take it you saw that. I was misinformed and I apologized.
me too buddy. me too. I am not addicted to nic. I just love this hobby. it is my favorite thing to do in many years. even visiting the shops. right now this is my livelihood. I am very old and this was just what I needed to perk up. not the nic at all. just love everything about this. just as you say you do. I will actually probably become quite depressed if they kill my joy.
me too buddy. me too. I am not addicted to nic. I just love this hobby. it is my favorite thing to do in many years. even visiting the shops. right now this is my livelihood. I am very old and this was just what I needed to perk up. not the nic at all. just love everything about this. just as you say you do. I will actually probably become quite depressed if they kill my joy.
And they (FT forum) are complaining that it's over priced. LOL $122
$122.90 Kangside KSD Panzer 200W 4500mAh TC VW APV Mod - 1-200W / 200-600'F / aluminum alloy at FastTech - Worldwide Free Shipping
Just wondering about the chip in that Kangside mod - no mention of Evolv and it's listed as a D-N-A 200.
I like the look of this mod but I think I'll wait because there's an SXK mod which sports a DNA interface but it's not Evolv...
I like the look of this mod but I think I'll wait because there's an SXK mod which sports a DNA interface but it's not Evolv...
I love my reuleaux but when I tried my first ti build on it, it tasted too hot or burnt, not sure. I put the file for sweet spot on it but I don't know. Maybe cuss I didn't clean the wire. But when I put it on my vapor flask sx on TI it worked fine, I'll try switching it back over and see what's up. But I also got SS wire from UD 28g would anyone know a good starting point for that for temp control? And where to find the info to plug into escribe for the wire? Thanks all.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
The only two problems when relieved where these two finish hiccups. ;(
Sent from my iPhone using Tapatalk
In eScribe take notice of your preheat.
If it is set to 200 start lowering that, then slowly raise to a level that is comfortable FOR YOU.
Say you comfortably vape at 40 watts on a particular atty, set the preheat to 50...60...75...and so on until you get the vape you want.
Some folks have hard and fast rules about this but getting a nasty hit as you did calls for the practical over the theoretical. [emoji18]
The VF SX, which I also own, does not have a preheat setting like the DNA 200. The Powerful & Powerful+ setting of the SX are tame compared to what the DNA 200 can do.
I have the preheat set between 50 and 100 watts in my four (4) Reuleaux profiles.
that panzer way to big for only a 1500 mah lipo. plain ugly, waste of space. was looking at sum size pics on a google image search...huge..yikes.
Ugly and clunky as well. Vent ports all over it? Got my reuleaux cheaper. Pass.
my reuleaux is nearly flawless to my naked eyes. I am very happy with the fit and finish. It is simply a great box. Now my favorite mod. It is big and heavy but lasts like no ones business and somehow charges faster than it is supposed to. perhaps the $100 charger I got. Doubt that but don't know. for the first time I feel I do not need another mod until it breaks or a new board comes out. even then this is everything I need and then some but I like the latest and greatest. very unfortunately this may be my last mod anyways if you know what I mean.
That is a sign of variable resistance in your atomizer (or less likely your mod). Some atomizers are not suitable for TC. I use Titanium and 20% of my atomizers are so poor at TC that they can't be used for it.
I checked mine in escribe and it was charging at 2amps. It was a DIY mod and I bought my DNA200 from an Irish vendor. Unfortunately it lost calibration and I sent it to evolv for repair, so I can't check it back. It took 10 days from greece to go there. As soon as they recieved the board they prossesed my rma and I'm waiting for the post services for 14 days to recive it back. Still no luck.
are the new relos' really charging at two amps??????? if i missed out on a hardware upgraded version.......man. i thought the double amp charging was exclusive to VS?
I understand some attys are not suitable for TC, isn't it weird though that they work fine on DNA 40 and don't fluctuate? I have tons of attys what do you find works best with titanium?
I don't know if they are the best RTA'S for Ti1 (I don't have them all), but my Billow V2's and UD Bellus are working just fine with Ti1 on my DNA200 mods.
Cheers,
Steve
Cheers,
Steve
- Status
Similar threads
