dna 30, dna 20, Groove, or zmax PCB board to make my mod?

[Doug_xx2]

I am thinking of building a battery box and I am wondering if I should use a dna 30, dna 20, Groove, or zmax PCB board to make my mod? Should I try to build one myself? (I don't think I can build anything as good as those)

I can't find a distributer that even has a dna 20 in stock let alone a DNA 30 so that choice may not be possible anyway.

What do you all think?

BTW I am thinking of using this for a box seems to be a nice fit. What do you think?

 

[rob33]

I think it would be a cool build check your inbox

 

[Doug_xx2]

well I decided to bite the bullet and buy the dna 30 kit from a third party vendor site even though it was marked up a lot.

Hope it gets here fast

Vape on guys

 

[bapgood]

Where did you get the DNA30 and what comes in the kit?

 

[SupplyDaddy]

dna30, 20 other bits and pieces @ Evolv LLC - Shop Now
zmax board ZMax Rev 2 Printed Circut Board

 

[Doug_xx2]

dna30, 20 other bits and pieces @ Evolv LLC - Shop Now
zmax board ZMax Rev 2 Printed Circut Board

OUT OF STOCK AT MANUFACTURER'S WEBSITE. suckiemoto for me.

 

[Doug_xx2]

Where did you get the DNA30 and what comes in the kit?

DIY PARTS / KITS - A to Z Vapor World

dna 30 controller usb charging board switch buttons atomizer connector etc.

I opted for the 30 and the chrome tactile switches and paid through the nose. You know I want + they have + nobody else does= I pay. LOL!!!
Free enterprise gotta love it....

 

[jmarkus]

holy crap, they want almost $100 for the board!!!

 

[bapgood]

holy crap, they want almost $100 for the board!!!

No they are selling the board for $65 and charger for $13

 

[T1lVl]

No. That's for dna20 if you drop down box to dna30 its 64.99 plua 30.00

Insane

Sent from my SGH-T999 using Tapatalk

 

[bapgood]

No. That's for dna20 if you drop down box to dna30 its 64.99 plua 30.00

Insane

Sent from my SGH-T999 using Tapatalk

I stand corrected

 

[Doug_xx2]

yeah for a $45 board. now go find one

 

[bapgood]

yeah for a $45 board. now go find one

No doubt they are hard to find right now.

 

[Doug_xx2]

does anyone have any thoughts on batteries to go with a dna 30 mod?

 

[Visus]

Batteries & Accessories>Li-Poly (All brands)

 

[Visus]

I saw a dna30 board on ebay for $125

 

[Doug_xx2]

Batteries & Accessories>Li-Poly (All brands)

nice place to get batteries but I was thinking more like how many volts can the board handle what kind of batteries can handle the output required to run that board at max output etc. High drain I would assume but then what about battery life to. I don't want to have to charge avery third vape lol. The kit I got also comes with their usb charging board so I am going to have to take into account the stats for that to. Man I am going to have to get the specs for both of them I hope that it comes with em or else I am going to have to start digging. research is a pain in the ....

 

[bapgood]

Evolv has the DNA30 data sheet on their website and it covers most of your questions

 

[retird]

Here is the link to the dna30 data sheet:

http://www.evolvapor.com/datasheet/dna30.pdf

And here is the info on the charger board:

Our Micro-USB charging module lets you add the functionality of onboard charging to your DNA 12 and DNA20D projects or can be used as a standalone charger for non-DNA projects. It is designed for charging 3.7V 1S Li-Ion and Li-Poly cells. An onboard status LED illuminates red when charging, green when fully charged, and orange when no battery is present. Mounting holes for #2 screws are provided for easy attachment.

$7.50

Input Voltage:
4.5-5.5VDC
Charge Current:
500mA
Charge Voltage:
4.2V
Input Interface:
Micro-USB

Dimensions:
0.5" x 0.6" x 0.14"
Mounting:
#2 screws 0.30" apart on center
Purpose:
charger for 3.7V 1S Li-Ion & Li-Poly Cells (can be used with the DNA 12 or as a standalone charger)



Research is not such a pain...took all of 45 seconds to get this for ya....enjoy reading....

 

[Doug_xx2]

Here is the link to the dna30 data sheet:

http://www.evolvapor.com/datasheet/dna30.pdf

And here is the info on the charger board:

Our Micro-USB charging module lets you add the functionality of onboard charging to your DNA 12 and DNA20D projects or can be used as a standalone charger for non-DNA projects. It is designed for charging 3.7V 1S Li-Ion and Li-Poly cells. An onboard status LED illuminates red when charging, green when fully charged, and orange when no battery is present. Mounting holes for #2 screws are provided for easy attachment.

$7.50

Input Voltage:
4.5-5.5VDC
Charge Current:
500mA
Charge Voltage:
4.2V
Input Interface:
Micro-USB

Dimensions:
0.5" x 0.6" x 0.14"
Mounting:
#2 screws 0.30" apart on center
Purpose:
charger for 3.7V 1S Li-Ion & Li-Poly Cells (can be used with the DNA 12 or as a standalone charger)



Research is not such a pain...took all of 45 seconds to get this for ya....enjoy reading....

now I have to check out the different brands of batteries you know c rate safety record etc. that is the first half yes. I hadn't even started yet lol. Right at the moment I am mixing mixing mixing and reading about that. Just got a gallon of vg a gallon of pg 14 4oz bottles from tfa and a liter of 100 mg nic juice. I also ordered a nimbus dripper. and this mod kit. gonna be some juicy goodness up in here!!!!!!!!!!!!