DNA20 display issue

[Rickman6982]

I have been using an IGO-S on a DNA20 NES mod quite happily for about a month now and I have encountered an issue today. I use the word issue because it doesn't really seem to be a problem. I just find it odd. When wrapping my coils I shoot for 1 ohm and I am normally spot on, but today my coil came out to 0.9 ohm. No problem. It fired normally (aside from the initial flashing resistance reading which I assume was to warn me that I was sub-ohm). I locked my control then dripped and when I unlocked the control to fire...The display was upside down. WTH? Everything still functions properly, but I don't understand what may have happened to cause something so odd. Anybody ever experienced this or have the technical know how to explain to me what happened here?

 

[Technonut]

Click the fire button 5 times to lock it. Then, while locked, hold the fire button down while pressing one of the others. (mine is on the top) Hold it down, and you will see either "Left Mode" or "Right Mode" on the display. Choose which you want, and let the button go to set it.

 

[Rickman6982]

I am only getting Right Mode and Normal Mode. Both of them have my display upside down.

 

[Technonut]

I am only getting Right Mode and Normal Mode. Both of them have my display upside down.

You need to keep the button pressed down when it says Right Mode.. In about 5 seconds, it should change to Left Mode.. (will flip your screen back around)

 

[Rickman6982]

Huzzah! Thank you Technonut. That was driving me crazy.

 

[Technonut]

Huzzah! Thank you Technonut. That was driving me crazy.

NP.. The other button will take it from Normal Mode to Stealth Mode with no display showing at all.

 

[Rickman6982]

NP.. The other button will take it from Normal Mode to Stealth Mode with no display showing at all.

Good to know.

 

[dr g]

Just FYI it's the "up" button that does the left-right flip.