DNA30 by cloupor

[sumiquatchim]

How can you get the most flavor and vapor out of this device. What ohm will give you the maximum settings ?

 

[anumber1]

I am currently enjoying mine with a Magma RDA built with dual 28g micro coils for 0.7 ohms, wicked with rayon.

Jerry's juice @ 30w.

Delicious!

 

[sumiquatchim]

How do you get the most vapor out of it ? What ohms should it be running at ?

 

[sumiquatchim]

So i used the steam engine and it tells me the median resistance is where i would get the most possible vapor and flavor out of my device, am i right ?
So on, the median resistance was 0.83 = 6 wraps of 32 gauge kanthal (dual). What drill bit size tho ?

 

[anumber1]

How do you get the most vapor out of it ? What ohms should it be running at ?

All of that is going to depend on your atomizer.

I build my RDA's for use on my hana clone with 28 gauge kanthal. usually for around 1 ohm. That will give a good range of up/down wattage range.

Maximum vapor production is more about airflow and overal atomizer design as the hana clone is going to give a max of 30 watts regardless.

 

[sumiquatchim]

All of that is going to depend on your atomizer.

I build my RDA's for use on my hana clone with 28 gauge kanthal. usually for around 1 ohm. That will give a good range of up/down wattage range.

Maximum vapor production is more about airflow and overal atomizer design as the hana clone is going to give a max of 30 watts regardless.

so will i be good on my plume veil at 0.8 ohms ?

 

[anumber1]

so will i be good on my plume veil at 0.8 ohms ?

Yep, the plume veil is a nice, airy rda.

I wouldnt build it with 32 gauge kanthal however.

You will not have a lot of wraps with that.

Not much surface area.

Go with some 28. 2mm dia coil.

Jmho anyway

 

[sumiquatchim]

Yep, the plume veil is a nice, airy rda.

I wouldnt build it with 32 gauge kanthal however.

You will not have a lot of wraps with that.

Not much surface area.

Go with some 28. 2mm dia coil.

Jmho anyway

Saw a video on the veritas, maybe go for that. i dont know yet. I have a limited ejuice supply 510ml and the veritas seems to have all that. leak proof, flavor is topnotch, you can go to about 35 pulls + at 30 watts and not get a dry hit. it seems that it might be the most convenient one for me. still i repeat i dont know yet. And btw is 80%vg 20%pg have a good flavor ?

 

[Newportlocal]

You can have great flavor with any PG/VG ratio. Depends on the flavors that are added to it and people's personal flavor preferences. Some even prefer no flavor added. I am not one of them, but there are some on here that prefer unflavored.

 

[roflwaffles]

.6 with the Plumeveil at 30 watts is awesome.

 

[Blackboar]

What's been working for me has been a single coil in my Magma. It's 9 (or 10, I forget) wraps of 26 gauge wire around a 3/32 drill bit, giving me 1.3 ohms. For my fruit flavors, I tend to vape it at 24 watts. It gives me the best flavor, IMO. For my dessert flavors, I'll vape it at 30 watts, because I want the warmer vape. It's not a cloud chasing set up, but it blows out decent vapor. I prefer the 26 gauge wire because it gives me the surface area on my coil to heat up enough juice (enough wraps), while still able to heat the juice up instantly (not so many wraps, who wants to have to wait for a coil to heat up!).

 

[herb]

How do you get the most vapor out of it ? What ohms should it be running at ?

Want more vapor use more VG , i get the best vapor and flavor with builds above 1 ohm on the Kayfun's and even the Magma , no need to go real low on these devices .