Dripping attys

[TheDishD]

Oops! I meant 0.7~0.8Ω... LOL!

Haha all good FD, i knew what u ment, humm a 7-8 ohm coil..wonder how much wire ud need for that.. (Goes to check Vapor Toolbox app)
Lol 828mm of 28g and 71-72 wraps at 3mm.. Bloody big atty u have there FD [emoji56][emoji41]

sent via a smartphone with a dumb operator XD

 

[TheDishD]

Oh for the love of all thats holy...

LMAO [emoji56]

sent via a smartphone with a dumb operator XD

 

[penguiness]

Oh for the love of all thats holy...

LMAO [emoji56]

sent via a smartphone with a dumb operator XD

That sucker would take all a 18650 could give... in one pull!

 

[renorat]

That sucker would take all a 18650 could give... in one pull!

Just to make it slightly warm.

 

[DasBluCig]

That sucker would take all a 18650 could give... in one pull!

That's why that particular coil is powered by a Sears Die Hard....!!!
Impedence -- ~623 ohms
Volts - 12.6 D
Amps - >550 ("cranking")!!
Happy (vaping) Trails!

 

[PersimmonNJ]

Oh for the love of all thats holy...

LMAO [emoji56]

sent via a smartphone with a dumb operator XD

Ok that just made me LOL and almost end up with drip tip up my nose.

Jumper cables needed for that sucker...

 

[zero7starz]

Last night I was bored so I decided to build my dripper. I bought this a few months ago from fasttech and was so enthralled with my KFL that I never built it.

My dripper is the IGO-M, made by UD. It came into existence around March as one of UD's new products. This is a great dripper, and was very easy to build. It has three posts, with leg holes, Phillips head screws (same size as the KFL's deck screws,) and can accommodate four micro coils. The IGO-M also has three HUGE air holes, with adjustable air flow (from closed off to wide open.)

From FT I paid less than $20 for it, from other retailers or eBay they seem to go for about $35.

Here are some pics of the device, my build, and some vapor.







This was my first dripper build, the first time I've ever Vaped more than one micro coil, and the first sub ohm build I ever made. Came out to .3ohms. I have to say, it's an impressive amount of vapor. Don't know if dripping will be something I do a lot. The build was easy enough, but tanks make me very lazy only filling them once every few days whilst dripping is more of a constant thing.

We will see! First USEABLE dripper in the house! Whoooo!!!

 

[TamiPac]

Last night I was bored so I decided to build my dripper. I bought this a few months ago from FastTech and was so enthralled with my KFL that I never built it.

My dripper is the IGO-M, made by UD. It came into existence around March as one of UD's new products. This is a great dripper, and was very easy to build. It has three posts, with leg holes, Phillips head screws (same size as the KFL's deck screws,) and can accommodate four micro coils. The IGO-M also has three HUGE air holes, with adjustable air flow (from closed off to wide open.)

From FT I paid less than $20 for it, from other retailers or eBay they seem to go for about $35.

Here are some pics of the device, my build, and some vapor.

View attachment 368882

View attachment 368883

View attachment 368884

This was my first dripper build, the first time I've ever Vaped more than one micro coil, and the first sub ohm build I ever made. Came out to .3ohms. I have to say, it's an impressive amount of vapor. Don't know if dripping will be something I do a lot. The build was easy enough, but tanks make me very lazy only filling them once every few days whilst dripping is more of a constant thing.

We will see! First USEABLE dripper in the house! Whoooo!!!

Congrats!!!! I drip at home only but find it is a totally different vape than the tanks so I have to have both. I can also only use about 6mg nicotine in my drippers as opposed to 18-24 in the tanks. First few times until I figured it out I almost choked myself to death.

That looks like a super build, nicely done!

 

[zero7starz]

Congrats!!!! I drip at home only but find it is a totally different vape than the tanks so I have to have both. I can also only use about 6mg nicotine in my drippers as opposed to 18-24 in the tanks. First few times until I figured it out I almost choked myself to death.

That looks like a super build, nicely done!

Thanks like I said, it was my first dripper build. Didn't even look at any guides or anything I just built me four kayfun coils and shoved them all in there. It's still working fantastic. Really can't recommend this dripper enough, the air holes and adjustable airflow are killer. My sweet spot for air seems to be 2 1/2 open holes, and clouds it does produce. It also brought out a flavor profile on Home Slice I'd never gotten before. On my kayfun it just tastes like wonder bread, but in the dripper I also got the peanut butter. A nice surprise too.
All my juice is 12mg and I could see how 6 would be enough in the dripper. It gave me a huge head rush!!

 

[TamiPac]

Thanks like I said, it was my first dripper build. Didn't even look at any guides or anything I just built me four kayfun coils and shoved them all in there. It's still working fantastic. Really can't recommend this dripper enough, the air holes and adjustable airflow are killer. My sweet spot for air seems to be 2 1/2 open holes, and clouds it does produce. It also brought out a flavor profile on Home Slice I'd never gotten before. On my kayfun it just tastes like wonder bread, but in the dripper I also got the peanut butter. A nice surprise too.
All my juice is 12mg and I could see how 6 would be enough in the dripper. It gave me a huge head rush!!

If you drop it down to 6 you will be amazed at the flavor profiles you can get. I ordered 0mg nicotine of juice I already had and made litte 6mg bottles just for my drippers.

 

[zero7starz]

If you drop it down to 6 you will be amazed at the flavor profiles you can get. I ordered 0mg nicotine of juice I already had and made litte 6mg bottles just for my drippers.

That's a great idea! I might just do that. I do have a lot of small empty bottles floating around.