Dripping

[moped.greg]

So since i have been vaping I have been using T2 or T3 Clearomizers. For trying different juices I just fill up the Clearomizer and give it a go, even if i dont like it i finish it because I payed for it.

I hear people talking about dripping and i would like to use that for trying different flavors. Can anyone recommend what i should get/use for dripping?

Im thinking about dabbing in some DIY and i dont want to use a whole clearo fill on something thats nasty.

 

[Uno mas]

I use a 510 bridgeless 2ohm atty, works like a champ,

 

[schlim66]

I use a 510 bridgeless 2ohm atty, works like a champ,

+1
I clean them out with hot water then a 15 minute vodka soak and a final water rinse. Blow them out with a can of compressed air and I'm good to try something else

Schlim66

 

[Stephen Cox]

Something like the Igo-l isn't to advanced of a rebuildable. Changing flavors is stupid easy. The vape is phenominal out of this world. The coil and wick last a lifetime through numerous dry burns. It's super cheap to use and you'll never have to buy another atomizer out of necessity for sure. Need I say more?

 

[TroyHoot]

Im using a smartvapes bridgeless dripping atomizer. Just got a second one today, so I have a spare in case. Looking into getting a Igo-l for a more permanent thing though. The smartvapes dripping attys work great. I clean with a little bit of Everclear(PGA) to switch flavors.

 

[Gr8Scott]

I was all crazy about clearos when I got into all this but I had the same concerns as you.

If you're still trying to decide what you want to vape, I personally wouldn't mess with clearos, for exactly the reasons you said.


Dripping is they best way, the way of true vaping connoiseurs. It's.... pure.


Now option one:

Here you'll find the absolute best dripping atty in the know universe:

Empiremods Bridge Free LR510 1.5ohm

I was totally changed after experiencing a bridgeless dripping atty from Empire Mods. When it comes to premanufactured atomizers Empire's LR attys are truly the finest. Anywhere.
That's why they are often out of stock.
Plus, The proprietor of Empire Mods, Keith, really works to help you if you have questions or concerns.

You just cannot go wrong with one of their attys. They're freakin' awesome. You taste all the flavor in your juice and the throat hit is immense at 1.5Ω .

I do rebuildable attys now, pretty much exclusively, but I would still buy one of those Empire attys!


Be careful buying attys billed as" bridgeless" from other sites. Too many times they have just replaced the bridge with a dripping pan and they totally completely SUCK.


Welcome to vaping

 

[ClippinWings]

You don't need a fancy Atty a good old 510 will work fine....

Bridgeless might be nice though.

I mean if its just for sampling flavors, cheaper seems to be better.

Sent from the ether using the power of my mind... and the Tapatalk app.

 

[TroyHoot]

My first one was a cheap 510. worked for like 3 puffs then blew out. I got the Smartvapes dipping atty and its been going great for couple weeks. I got the 2nd one just in case. Not expecting it to go bad anytime soon though.

So I would suggest if you get one. Dont get the cheapest you see. Like I did the first time.

 

[tj99959]

Here is all the atty you need for what you are trying to do, and at 3 bucks a pop you won't care all that much if you ruin one or two while learning how to drip.
http://www.reosmods.com/index.php?p...category_id=4&option=com_virtuemart&Itemid=10

 

[Cloud Wizard]

Best I've found are 1) HH.357 long barrel @2.0ohm 2)Cisco 306 @1.8ohm (both from Avid Vapor)

 

[tj99959]

There isn't a way in the world that I would suggest that someone spend $22 for a 357 to learn how to drip with, or just use to test flavors.
Yes they are a great atty, just not the one for learning how.

 

[dgslave]

I picked up one of these to test juices with: 510 LR 1.8ohm Atomizer (chrome) | Atomizers | iVAPE

Fast forward 2 weeks and it's now my primary mode of vaping. Works great. Just be sure to get rid of the awful plastic tip that comes with it.

 

[moped.greg]

Just put the order in for a 510 bridgeless from discountvaper. I feel well on my way to actually knowing my stuff.

thanks guys

 

[The Ocelot]

Hi! I'm a big fan of a LR306 with a Cannon drip tip. I find it puts out a lot more vapor than a 510 (which I also use since some came with my original kit).

 

[Quoiyaien]

You only have to press submit once... even if it doesnt load, your posts will usually still show up.

 

[eHuman]

Way to up your post count DGslave lol.

If you don't mind a rebuildable, I too recommend the SS IGO-L. I have mine set up with a 30g kanthal 4/5 wrap @ 1.5Ω, 400 mesh SS wick instead of silica and it is a pure, clean, flavorful vapor producing monster. SteamMonkey.com has a great price on them but you can get them at alot of locations.

I am out of pocket $23 + shipping:
$14 for the IGO-L, (Baring replacing o-rings, it will last longer than you will live)
$4 for 12ft of kanthal (will almost make 100 coils for the IGO-L)
$5 for a 6" x 12" piece of 400 mesh SS cloth, will make 72 wicks for the IGO-L and you don't need to change the wick on every coil change)
it will outlast quite a few hundred dripping attys.

 

[Quoiyaien]

Ive heard of accidental double posts, but 11.. geez man... lol

 

[Quoiyaien]

and hes still going...

 

[Gr8Scott]

Just put the order in for a 510 bridgeless from discountvaper. I feel well on my way to actually knowing my stuff.

thanks guys

Which one, and how many ohms? The ohm rating is crucial.

Lower ohm-age=hotter vapor which emulates the cigarette throat hit, IMHO.

For about a dollar more you could have one of the absolute best on the planet. No feces.

here:

LR Atomizers

And you've obviously got your connections down ie:510. (Whereas a 306 or other isn't going to fit If you stick with a 510 it frees up more space for learning. If you want to try different connections later, cool, but for now 510 is great)

Trust me, I usually don't get zealous about individual products like I do with these.

I am fond of discount vapers attention to customer service, but those look like the ones with pans instead of what you see here:

This is what you want to see when you look into the atty, this is a true bridgeless:




if you look down and see a little brassy "pan" with 4 holes in it, it's not going to provide the purest taste.

And yes it does matter as you will see. All I do anymore is drip. I have all the goodies, cartos, double barrel adapters, clearos of all sorts and Like I said rebuildables.

Trust me,
Just slappin' out 3 bucks for a cheapo boge/smoktech will just provide mediocre results.

But at least you will be able to know the difference

Vape on!

 

[JB721]

I wanted to try a bunch of new flavors so dripping seemed like the way to go. I was looking for a bridgeless atty my friend was looking at but the web site was sold out. I ended up with Joye 510 Atomizers and have been dripping with those. I got 2 but I've only used one of them so far. I've been kinda lazy on cleaning and pretty much just end up dripping a new flavor for a while til the old flavor is gone. The only vodka I have on hand is the good stuff...