Drippings of Whats to come - A tease for all !!!
- Thread starter badkolo
- Start date
- th_trl_thread_readers 0
- Status
oh, and no thats not a 510 stick style, thats something special.
and yes, thats a xl ce2 with conversion kit.
and yes, thats a xl ce2 with conversion kit.
I can see how the new Vision style mouthpiece is a step up from the Microcig mouthpiece, but I don't understand how the cup seal is going to fit in a Fluxo without crushing the wicks... 
Will the new Visions come in colors like the Fluxos?
What the F is that thing? Did you design a battery specifically for the Vision? Is that a metal Vision? Is that a battery for a new Turbine?
So many questions...
Will the new Visions come in colors like the Fluxos?
What the F is that thing? Did you design a battery specifically for the Vision? Is that a metal Vision? Is that a battery for a new Turbine?
So many questions...
My take on the pics...
1. The new Vision Deux with unbreakable tubes like the fluxomizers.
2. Fairly obvious, the new mouthpiece that is a scaled down Vision Deux style.
3. A stainless Sapphire with see thru window???
@monarch, after just getting the Vision in the mail today and doing a little bit of tweaking, the wick cup seal can be adjusted to where you can adjust to properly get the wicks sufficiently wet for vaping. For the fluxos this will improve them tremendously. If you ever filled a Vision, this will be just as simple. When installing the fix for the fluxos, place the cup seal in the top then use the mouthpiece to slowly push the seal down over the cup, don't force it all the way down and you should be good to go. These are only my observations after having played with the Deux & it has been working great for me.
1. The new Vision Deux with unbreakable tubes like the fluxomizers.
2. Fairly obvious, the new mouthpiece that is a scaled down Vision Deux style.
3. A stainless Sapphire with see thru window???
@monarch, after just getting the Vision in the mail today and doing a little bit of tweaking, the wick cup seal can be adjusted to where you can adjust to properly get the wicks sufficiently wet for vaping. For the fluxos this will improve them tremendously. If you ever filled a Vision, this will be just as simple. When installing the fix for the fluxos, place the cup seal in the top then use the mouthpiece to slowly push the seal down over the cup, don't force it all the way down and you should be good to go. These are only my observations after having played with the Deux & it has been working great for me.
@monarch, after just getting the Vision in the mail today and doing a little bit of tweaking, the wick cup seal can be adjusted to where you can adjust to properly get the wicks sufficiently wet for vaping. For the fluxos this will improve them tremendously. If you ever filled a Vision, this will be just as simple. When installing the fix for the fluxos, place the cup seal in the top then use the mouthpiece to slowly push the seal down over the cup, don't force it all the way down and you should be good to go. These are only my observations after having played with the Deux & it has been working great for me.
Thanks Gman, the part where I get stuck is: the Vision and the Flux use the same size cup? The Vision seems to work better since it gives the wicks proper room to breathe, that's why the donut ring is better than the standard Flux cup seal. If the design of the Vision-style cup seal is the same, and the cup is the same size, but the tube is smaller, how is this going to work as well as in the Vision?
What I'm smelling... (all conjecture, based on very little evidence)
GV coming out with a replacement for the Vision -and- the Fluxo that will combine the best attributes of both... This Frankencarto will essentially be a Vision with a Fluxo's tube... One of those names will be applied to the Frankencarto, and it will be available in 4 sizes... Thin short, thin long (for standard 510), fat short, fat long (for eGo and mods)... All 4 will be made by the company that makes the Vision... Now the really far-fetched part... The new widget is an eGo like battery, without the middle inset (where the button is) so either the button is going to be shaped differently, or be in a different place altogether... I imagine a usb port, battery level indicator, and may also be available in VV... This will compliment the Vision and the new Pump Turbine very well... This will be the 'suggested' GV mod, and someday standard 510s will be phased out... GotVapes (along with whoever makes the Vision, and whoever makes the new GV mod) will take over the world!
Again, all conjecture, based on very little evidence... I don't even know if any of the crap I just wrote is actually possible, but I like it.
Aright Bad, you may now poop on this.
Last edited:
finally a fluxo base designed the way it should be lol. and the new seals look killer but is there really enough room to drip down through the little hole? thick juice might have a problem getting through there with the surface tension and all...
and the bottom thing? looks like a juice viewing window but i don't see any gaps or air holes where the seam is... maybe a metal sapphire or a fluxo cover or something...
and the bottom thing? looks like a juice viewing window but i don't see any gaps or air holes where the seam is... maybe a metal sapphire or a fluxo cover or something...
The 3rd one looks like it could be a metal vision (replacement to the maximizer?)
its not a f1, its not a ego of any kind, its not a 510 stick, and it uses a new vision that hasnt been seen yet and yes your right, there is 4 new visions coming and the tube isnt the only thing thats new, the base is as well and it doesnt leak.
launching soon. plus many other things are on their way and some new things already here.
launching soon. plus many other things are on their way and some new things already here.
- Status
Similar threads
