Dropped my iTaste MVP 3.0. Something weird happening

[daveyp]

So I dropped by brand new MVP. I had the eleaf Melo tank installed when it hit the ground. Didn't see how it landed or anything. But when I picked it up and tried to vape the resistance reads "-.-". The device seemed to be fine, so I thought maybe the coil or tank fell out of wack and tried it on my iStick 50w. It worked fine!

So obviously it must be the MVP then?? I installed another Melo that I bought and it works fine on the MVP. But after disassembling the older Melo (that was originally on the MVP) and putting back together it still will not fire on the MVP, just the iStick. I tried playing with the center pin on the Melo but have had no luck.

So what the heck is going on?

 

[the wind]

what I'm reading makes no sense.So going with the MVP wants no part of that tank and blames it for the drop.

 

[r77r7r]

Raise the post in the MVP?

Are the OHMs still within range for the MVP?

 

[GrandSam]

"-.-" is a face often used to depict annoyance. Your device is annoyed that you dropped it. Stop dropping it.

 

[daveyp]

Raise the post in the MVP?

Are the OHMs still within range for the MVP?

Ohms are still the same, as reported by the istick (0.6). The second melo, for whatever reason, is reading 0.7 on both devices with a supposed .5 coil.

what I'm reading makes no sense.So going with the MVP wants no part of that tank and blames it for the drop.

lol yes, i feel the same way.

 

[Bunnykiller]

have you tried installing a new coil and retesting?

 

[Cloudmann]

The 510 connector on your tank and the mvp might have both bent slightly during the drop. Just enough to short each other out but not with other mods or tanks that have good threading and connectors. That's my best guess.

 

[daveyp]

have you tried installing a new coil and retesting?

It did start working fine again with a new coil, until about an hour ago. It was reading as 3.1 ohms. Then it went to 2.5, then 0.7, then 1.2...

 

[Cloudmann]

Sounds more and more like a bad 510 connection. If the tank works fine elsewhere and the mod works fine with other tanks and you've swapped coils, that's all that's left, really.