e cig holder idea

[nyabzns]

I have an idea for an e cig case, the thought occurred to me that a knife case might work perfectly for a mod or mod with a tank. I have an icon with a tank and I've been looking for the perfect thing to carry it around in. I've seen every kind of case imaginable but I haven't seen this idea brought up. Something like the ones at this link Case sales What do you think ?

 

[skyztheLynnit]

I like those. I use a hard shell eyeglass holder. They have large ones at walmart for 4 bucks outside the vision centers. I like the hard case in case my battery blows. Going to hot glue some elastic strips inside so my PV/juice doesn't slide around.

 

[volume control]

I have some orings around my mod rather than use a case, im sure its not as effective but it keeps it from getting banged up. Standard garden hose o rings fit the evic like a champ, but they sell plenty of other sizes at your Lowes or Home Depot or Ace or whatever you have in your area. Im happy with this configuration because for me, the tank+18350 literally lasts me the entire day. So no need to carry juice, other cartos, etc etc. I also replace my heads when they start to get a little iffy, rather than wait for them to completely fry.




Id also note for 18350s the only ones that last me all day are ICR 900mah's. I have some efest 800s and they only last half a day lol.

 

[degnr8]

Depending on the size of the mod, I generally either use a knife sheath or attach a belt clip to it

 

[GraceH]

A flash light belt holder might work too.

 

[xyanide]

A flash light belt holder might work too.

I was browsing around a flashlight shop one day to see what they had. There's so many different sizes for flashlight holsters I think you can buy these for anything from an ego to a vamo.

 

[Whosback]

A flash light belt holder might work too.

It's what I use. One of those multi size ones.

 

[mogium]

Go to walmart for 10 bucks they have a hard case medicine box in the diebetic aisle works well comes a small zipper pouch

 

[tcgenius]

I just brought this up in another thread. I haven't seen any quality cases or pouches anywhere for vaping hardware. I have a friend who is a leather smith. He can make anything out of leather. I have sent him measurements for custom holsters and pouches in the past. I was going to ask him to make me something. The last thing he made me was a custom leather belt pouch for my iPhone. He even put skulls on it for me. It will last longer than I do. The only thing that has been stopping me is that I am still kind of new to mods and haven't settled on a specific everyday vv yet. Evert time I am on this forum I lean closer and closer to a prover. I just don't have the money for one right now. As soon as I can afford it, I will have a case made. If anyone is interested in a project, you can give me some measurements for a provari and I will ask him to make a prototype. There is a huge market for it. If we can help him figure out a good design vapors all over would have a nice option. Just thinking out loud.

 

[ScottP]

I have the perfect PV holder. It was made by God and didn't cost me a dime. I hold it in my hand.

Seriously though I just put it in my front left pocket when not at home and it is usually laying near me when at home.

 

[tcgenius]

I used to do that, and still do sometimes with my ego, but I have broken 2 clearamizers, lost a couple of drip tips, and leaked juice in my pocket several times. I am not good with things in my pocket. Thats just me.

 

[Ken_A]

There is a Greek vendor that makes PV holders that can be attached to a laynard, or threaded through the belt. He has some that will hold a Tesla with an RBA attached and the cover flap will hold an extra battery and/or a bottle of juice.

 

[tcgenius]

I don't suppose you have a pic or a website do you? I would love to see it.

There is a Greek vendor that makes PV holders that can be attached to a laynard, or threaded through the belt. He has some that will hold a Tesla with an RBA attached and the cover flap will hold an extra battery and/or a bottle of juice.

 

[Ken_A]

I looked for the video... It was by Demetrius (thevapinggreek), but cannot find it right now... Maybe it was during one of the shows?

 

[tcgenius]

Thanks for the info, I will keep an eye out for it. If I find it I will post it.

 

[tcgenius]

Please forgive me, I didn't mean to hijack this thread. I am still new here and realized that what I did was kind of rude. I will start a new thread instead. Please accept my apologies, I am still learning the proper forum etiquette. I also don't know how to remove attachments from posts.

The new thread is here

 

[Ken_A]

still did not find the video, but Phil mentioned it in his latest review
they do not have a web page, but do have a facebook page.

https://www.facebook.com/3BHandmadeCases

 

[Heavyrocker]

I made this at work for a block of aluminium.

 

[tcgenius]

I saw something similar to that online but it had a built in ego style charger in the base.

a

View attachment 218573 View attachment 218571

I made this at work for a block of aluminium.

 

[Heavyrocker]

I saw something similar to that online but it had a built in ego style charger in the base

a

Thats where i got the idea too make this,it really helps with my Vamo and AGA tank,it will not fall over.I also have some strips of copper that slide in the holes as inserts for different sizes of mods.Actually these pieces of aluminum are off cuts from the milling machine,they come out round i just do the holes.