E2 R4 Cartomizers?

[intog]

I must be lacking in my research. After using a PV for a month and being a member of this forum for a month, I just learned about the E2 R4 cartomizers today!


I am using the small cigarette auto batteries, both 510 and 4081 (with a 510 adapter). I like these and don't intend on upgrading to the eGo (yet). What ohm range is best for these? The 2.4-2.6 or the 2.8-3.0? I thought I would buy a pack of each, but I keep spending more money than I need to so I thought I would ask for help first.

 

[antlion]

Heya dude, yea if you're looking for a good cartomizer. I recently got me some E2 Low resistance Cartomizers from Clouds of Vapor Clouds of Vapor . That was a recommendation from a guy (whose name I forget) from youtube. I believe his nick name was Truth. But anyways, hes been pretty helpful to me in other suggestions. And I was blown away with how much vape you will get from an E2 Low resistance Cartomizer. My only problem is that refilling these things isn't exactly correct in what the card says when you get your package. They say you should see 2 little holes beside the BIG hole just below the coil (which is where your vape hit comes from)... Well that isn't true. You won't see these little holes to the left and right inside the atomizer. So you'll have to take the syringe that they give you and either fill it from the battery end into it... Or the other way at the BIG hole. But it is worth the mess of juice... It just wastes a little extra juice... But they are still really really really amazing throat it.

 

[WomanOfHeart]

Vapor Junction has these for $9.95 for a 5 pack. Use the coupon code "blackfriday" and you'll get another 30% off your order! I just got 3 packs and I can't wait until they get here. I've been wanting to try these for a long time!

 

[TL1000RSquid]

2.5's would probably work best on the little batteries. the 3ohms seem to give best results on 3.7v devices and up they work fine at lower volts but the vapor is rather cool instead of being warm.

Antlion the holes can be very hard to see but they are there, you need to fill them next to a light, a trick I learned is when you first get them take a paperclip and stick it through the holes it'll make them a bit less tight when you goto stick the plastic needle in, when I first got these carto's I kinked every plastic needle tip in the refill kit within a week cause the holes were so tight. You can also pop out the cap with the 2 holes and fill it direct that way with no juice wastage, the newest R4's caps come out fairly easily.

 

[intog]

2.5's would probably work best on the little batteries. the 3ohms seem to give best results on 3.7v devices and up they work fine at lower volts but the vapor is rather cool instead of being warm.

Yeah, that's what I thought. I'll try those first. Thanks!

 

[intog]

Vapor Junction has these for $9.95 for a 5 pack. Use the coupon code "blackfriday" and you'll get another 30% off your order! I just got 3 packs and I can't wait until they get here. I've been wanting to try these for a long time!

ugg, I am so sick of ordering online... Where is vapor junction located? I'll probably order them from the closest place to me. So far Madvapes is the closest (2 states away), but still up to 5 days for delivery.

 

[TL1000RSquid]

ugg, I am so sick of ordering online... Where is vapor junction located? I'll probably order them from the closest place to me. So far Madvapes is the closest (2 states away), but still up to 5 days for delivery.

Alabama I've ordered from them a couple times, shipping to NY was pretty quick maybe 4 days from placing order to getting it.

 

[intog]

Do the e2s last longer as in number of refills compared to regular cartomizers?

 

[TL1000RSquid]

Do the e2s last longer as in number of refills compared to regular cartomizers?

I've only had one actually die of natural causes it was about 5 weeks old and I'd been using it pretty much every day, I've set aside a few that still work but after over a months use the vapor production has declined. With Boges and other carto's with filler material I usually tossed them after a couple weeks so personally they the e2's last longer for me.

 

[OldDragon]

They can last a lot longer than the old filler types, there is not filler in the r4's. Been using some of mine over 3 weeks.

 

[Hawkins]

I just ordered a pack of each resistance type of these cartomizers as well as a new 3.7 volt box mod. Can't wait to try them out after all the good reviews I've read.

Sent from my LG-P509 using Tapatalk

 

[Jetmec]

I have been using Royalsmokers E2 2.5 ohm both the reg size and the XL for about a month and I love them. I have not burned any out. The XL I use on my eGo and the regular size I use on a VV mod and rotate 4 of them through out the day. I fill them twice a day and I vap a lot. Filling is not a problem, the small holes are hard to see but they are in there. I just ordered a hard blunt needle for filling them because the plastic one that comes with them is not very good but it works.

 

[intog]

Oooh, I have some blunt tip needles that I use to refill my inkjet cartidges... I think they will work. Off to clean the ink out of them!

 

[kevbow]

I've had nothing but bad luck with these cartomizers. I got 2 packs of E-2 R4 2.5 ohm. All 5 that I have tried worked fine for about 15 minutes then gave me a horrible burnt taste. I've tried them on every 3.7 device I have as well as my riva, ego, inferno and my old school 901. I just can't get one to work. I wish they would work because I love the concept of them. Now they only way they work is if I drip in them every 5 minutes.

 

[intog]

I've had nothing but bad luck with these cartomizers. I got 2 packs of E-2 R4 2.5 ohm. All 5 that I have tried worked fine for about 15 minutes then gave me a horrible burnt taste. I've tried them on every 3.7 device I have as well as my riva, ego, inferno and my old school 901. I just can't get one to work. I wish they would work because I love the concept of them. Now they only way they work is if I drip in them every 5 minutes.

I ordered some today, but that's my concern too. I read a few people experienced this. Sounds like it's not wicking quick enough for you. I wonder if it has something to do with vaping style. My GF vapes fast and light (like smoking a cig) and I take slow deep hits.

 

[CloudBurst]

Are you guys cleaning them at all and have you tried a syringe mod?

Droid is not perfect until it reads my mind and spells it correct!

 

[intog]

Are you guys cleaning them at all and have you tried a syringe mod?

Droid is not perfect until it reads my mind and spells it correct!

what is a syringe mod?

 

[CloudBurst]

It's a larger tube on the carto and for some reason it works great!
http://www.e-cigarette-forum.com/forum/atomizer-mods/135579-disappointed-ce2-try.html

 

[intog]

It's a larger tube on the carto and for some reason it works great!
http://www.e-cigarette-forum.com/forum/atomizer-mods/135579-disappointed-ce2-try.html

I'm trying this when the e2s come in, I've always wanted to see how much liquid was left!

 

[chain_vaper]

2 days I've had mine and they are awesome! Luckily I had a syringe (from a seed and feed store) that I could use since the little plastic one that comes with them doesn't work very well. So far they are much better than the ones with soft filler. FWIW.