Easy 510 VV mod, help needed

[Vap3Designer]

First of all Hi everyone!
I'm new on this forum but before being allowed to post in the mod section I have to post a few threads here. That's why this post is in the wrong section but nevertheless:
I am looking for a easy VV mod that works preferably with a 510 connection and should be VERY cheap!

I have done some research and came across many things. None seemed really suitable because I don't want a box design and I don't want to have to solder things on a PCB. I currently have 1 working and 1 broken Ego-CE4. I was thingking of modding the broken one.

I found this part: stealthvape.co.uk/electronic-cigarette-mod-parts/variable-voltage-boards/EGO-VV-PCB
Will this allow me to change the voltage somewhere between 3-6 V? and which battery should I buy for it. I wan't to play safe as well because I am not that technical and don't want to risk blowing up a battery. I think soldering the wires to a battery and a connector should be no problem though.

I am looking forward to your answers and hope I will be able to show you guys A nice home made device soon!!

peace

 

[Vap3Designer]

I dodn't like dubble posting but since nobody replies,
Could anyone help me please? I am looking for (internal) parts to make a mod.
I was thinking about this presoldered PCB with voltage adjustment:
stealthvape.co.uk/electronic-cigarette-mod-parts/variable-voltage-boards/EGO-VV-PCB

But I still need to find a suitable battery, and I want to know if this will (probbably) give me enough power to vape for example dry herbs with my glass bulb attatchment. And if it will be suitable for a better tank then the standart EGO-CE4. I was thinking about something like a kanger protank or something of that sort. what do you guys suggest?

Thanks in advance

 

[ahop]

madvapes.com has the rev 2 pcb board only $17 goes up too 15 watts or 6 volts with a 4amp max switch or you could go and the wild goose chase for a dna chip or facebook cream city mods he sells the china version of the dna chip for 50 and has them in stock

 

[Vap3Designer]

Hey, thanks mate! It looks like that will give me a more serious power boost (A) Do you know if it uses 510 connector and if it comes with it? And I don't know how to find a suitable battery for my pcb, what do I have to look for? Voltages, watts, ampere?

thank you and peace!

EDIT:
Will the AW IMR 18650 battery work? I can't seem to find any 6V battery's so i guess that is not necessary?
plus is a 510 connection a good choice? and what good tanks should I get with it?

 

[ahop]

they dont come with the 510 but madvapes.com also sells them they have nice pre wired ones too. Get your self a 18650 with atleast a 10 amp max amps the mah rating is the battery life find your self one with around 2000 mah then pick up a 18650 battery holder amazon ebay has them cheap. All of the pcb's i listed above have a max input voltage of 3.7 volts which a 18650 is rated for. For tanks most tanks like your kanger protanks or iclear 30s or 30b really dont last over 9 watts they burn up quick only tank i have used that i can vape at 15 watts is smok cartomizer tank Gun Meatal Artemas Locking 510 DCT, Clear hope this helps

 

[klynnn]

Check out this site free worldwide shipping. https://www.fasttech.com/products/0/10006734/1541304-authentic-sigelei-zmax-v2-variable-volt-watt

 

[Vap3Designer]

Thanks for your replies guys!
I am now looking at this combination:

PCB- madvapes.com/zmax-rev-2-printed-circut-board.html
Battery- madvapes.com/imr-18650-limn-2000mah-battery.html
battery holder- dx.com/p/diy-charging-battery-case-w-protective-panel-for-18650-black-282385#.UyByNfl5Pw8
connector- madvapes.com/prewired-510-battery-connector-sealed-3692.html

Will this work? I think so. then i'll be able to start thinking about a design

peace!