ECF contest winners, past, present & future!

[wvducklady]

Yeah, she's hired...but won't be starting til around the 25th. She "wanted to make sure her background check and potty test came back fine and all paperwork was done before she put in her 2 week notice at the place she's at".... For some reason that's raising a red flag for me, but she wasn't my pick anyways--it's all on the judges.

She probably wants to make sure she absolutely has the job first before quiting the job she has. I can understand that. I would do the same, and I have a completely clean background.

 

[GPC2012]

Yea, My replacement Frame sections came in for the Riding Mower.
I've had this 18h.p. 42in. Deck Rider(Montgomery Ward Signature) for about 20yrs. Most people would have gone through 3 by now
I've replaced a few small parts over the years, but it finally gave up last summer and Broke the rear Axle from the Frame. Both Frame sides cracked and broke away with the axle.(rough land)
Well, after much thought and research, I found all the parts for $110 shipped. Ordered those and found a Smaller Rider for $225(14.5hp/42in. cut)

If all goes right I will Rebuild the 18hp back to near new with the new frames, Clean up the 14.5hp and Sell it for everything invested in both.

Now all I need is some warm weather, room to work and my body to hold up.
Oh...............and a Really good vape to keep me calm .

And your hand to heal up.

 

[Kodak]

She probably wants to make sure she absolutely has the job first before quiting the job she has. I can understand that. I would do the same, and I have a completely clean background.

I know...it just kind of bums me out since it's already been 2 months without help around here--now I have to wait almost another full month. And then I have to train her as well!

 

[GPC2012]

I know...it just kind of bums me out since it's already been 2 months without help around here--now I have to wait almost another full month. And then I have to train her as well!

Fun Fun Fun

 

[crxess]

And your hand to heal up.

Pffft........... like I could be so lucky
I can straighten my fingers today, but it looks like a golf ball is where my knuckle should be Well a little smaller, but not much.
Noticed it was bright pink in the shower. Maybe inflammation?

Well, at least the project will be interesting and keep my mind occupied for a while.

 

[GPC2012]

Pffft........... like I could be so lucky
I can straighten my fingers today, but it looks like a golf ball is where my knuckle should be Well a little smaller, but not much.
Noticed it was bright pink in the shower. Maybe inflammation?

Well, at least the project will be interesting and keep my mind occupied for a while.

which knuckle first second third, first being the tip second middle...

 

[crxess]

which knuckle first second third, first being the tip second middle...

Middle
Swelling seems to be going down much faster today. Might be okay by tomorrow.

Decided to give myself DIY Break and placed an order with Yaeliq. 4 x 100 Mil.
3 on sale $11 and 1 at regular $18. Average $0.15 per mil. Not to bad.

Get to try a Few flavors I have not experienced and if liked, a reference for DIY.

Cheesecake
Banana Nut Bread
Saber Blood - A Complex Fruit flavor
Yellow Custard - to compare to my current Mix............Love Custard

* One of my favorite Vapes, creamy Hazelnut. I got a Free 15ml from a local B&M from a referral. 1/2 bottle later, I had duplicated and improved for my preference.

Still need to test my ReinDeer Poop before it goes into Rut Mixed it about a month ago. Guess I need to coil and wick a few rda's

 

[Rob Bacon]

Middle
Swelling seems to be going down much faster today. Might be okay by tomorrow.

Decided to give myself DIY Break and placed an order with Yaeliq. 4 x 100 Mil.
3 on sale $11 and 1 at regular $18. Average $0.15 per mil. Not to bad.

Get to try a Few flavors I have not experienced and if liked, a reference for DIY.

Cheesecake
Banana Nut Bread
Saber Blood - A Complex Fruit flavor
Yellow Custard - to compare to my current Mix............Love Custard

* One of my favorite Vapes, creamy Hazelnut. I got a Free 15ml from a local B&M from a referral. 1/2 bottle later, I had duplicated and improved for my preference.

Still need to test my ReinDeer Poop before it goes into Rut Mixed it about a month ago. Guess I need to coil and wick a few RDA's

How long does shipping normally take from Yaeliq
Sent from my SM-G930P using Tapatalk

 

[f1vefour]

How long does shipping normally take from Yaeliq
Sent from my SM-G930P using Tapatalk

Last I heard which was a good while back it was 7 to 10 days.

 

[wvducklady]

I know...it just kind of bums me out since it's already been 2 months without help around here--now I have to wait almost another full month. And then I have to train her as well!

Yea, that is tough. I feel for you. Your ready for some help, and I hope it comes soon

 

[gofishtx]

Yea, My replacement Frame sections came in for the Riding Mower.
I've had this 18h.p. 42in. Deck Rider(Montgomery Ward Signature) for about 20yrs. Most people would have gone through 3 by now
I've replaced a few small parts over the years, but it finally gave up last summer and Broke the rear Axle from the Frame. Both Frame sides cracked and broke away with the axle.(rough land)
Well, after much thought and research, I found all the parts for $110 shipped. Ordered those and found a Smaller Rider for $225(14.5hp/42in. cut)

If all goes right I will Rebuild the 18hp back to near new with the new frames, Clean up the 14.5hp and Sell it for everything invested in both.

Now all I need is some warm weather, room to work and my body to hold up.
Oh...............and a Really good Vape to keep me calm .

Juice that puppy up while you are at it. Lawnmower races

 

[gofishtx]

Middle
Swelling seems to be going down much faster today. Might be okay by tomorrow.

Decided to give myself DIY Break and placed an order with Yaeliq. 4 x 100 Mil.
3 on sale $11 and 1 at regular $18. Average $0.15 per mil. Not to bad.

Get to try a Few flavors I have not experienced and if liked, a reference for DIY.

Cheesecake
Banana Nut Bread
Saber Blood - A Complex Fruit flavor
Yellow Custard - to compare to my current Mix............Love Custard

* One of my favorite Vapes, creamy Hazelnut. I got a Free 15ml from a local B&M from a referral. 1/2 bottle later, I had duplicated and improved for my preference.

Still need to test my ReinDeer Poop before it goes into Rut Mixed it about a month ago. Guess I need to coil and wick a few RDA's

If it's pink it could be a touch of Gout. Get you a can of tart cherries from the grocery store pie baking section and drink the juice off of them, it should help, Gout or not.

 

[crxess]

How long does shipping normally take from Yaeliq
Sent from my SM-G930P using Tapatalk

Not sure.... Reading up seems like 10-14 days for most. Will probably need to steep a couple flavors longer.
I've also noticed since starting DIY, larger bottles can add a lot of extra time needed to mature. I just try and stay ahead of everything.

 

[Reddhott]

 

[crxess]

Juice that puppy up while you are at it. Lawnmower races

Daughter-n-law already says it is the Fastest mower she has ever seen.
The 18hp. is as fast in 3rd as the 14.5hp in top gear

Hand was just skin stretched tight. Color came back to normal as swelling reduced.

 

[Rob Bacon]

Yea, My replacement Frame sections came in for the Riding Mower.
I've had this 18h.p. 42in. Deck Rider(Montgomery Ward Signature) for about 20yrs. Most people would have gone through 3 by now[emoji38]I've replaced a few small parts over the years, but it finally gave up last summer and Broke the rear Axle from the Frame. Both Frame sides cracked and broke away with the axle.(rough land)
Well, after much thought and research, I found all the parts for $110 shipped. Ordered those and found a Smaller Rider for $225(14.5hp/42in. cut)

If all goes right I will Rebuild the 18hp back to near new with the new frames, Clean up the 14.5hp and Sell it for everything invested in both.

Now all I need is some warm weather, room to work and my body to hold up.
Oh...............and a Really good Vape to keep me calm .

I have an old 18 h.p. 42in craftsman I bought from my dad 5 yrs ago, and he had it for about 20 yrs. Only replace battery (several) and fuel filters and starter. It still runs like it was new. It's amazing how long stuff lasts when tou take care of it. Like L.O.F EVERY spring and just routine maintenance. Heck my 79 f150 runs great too.

Sent from my SM-G930P using Tapatalk

 

[f1vefour]

I've also noticed since starting DIY, larger bottles can add a lot of extra time needed to mature. I just try and stay ahead of everything.

Certainly does, a UC helps.

 

[crxess]

Certainly does, a UC helps.

Most definitely. Use mine every batch. I normally do 6hrs. on 100ml bottles.

 

[GPC2012]

@kad2371 You get any movement on your stuff coming out of San Diego, mine will be here today Fresno decided to hold onto it for an extra day out of laziness. Mine does say it's from VB though not the petstore.

 

[Sir Kadly]

@kad2371 You get any movement on your stuff coming out of San Diego, mine will be here today Fresno decided to hold onto it for an extra day out of laziness. Mine does say it's from VB though not the petstore.

Nope, no tracking updates since Monday, when it arrived in San Diego.