As the title says, so I tried putting my 18650 35a 2500 mAh 3.7 V Purple Efest batteries in my nemesis mech mod and it seems to be a near tight fit on it, and I'm not sure if this is suppose to happen. Am I suppose to remove some parts or rings in order for it to fire correctly? I tried pushing the switch with the battery on the bottom to see if it moves, and it doesn't seem to be budging after pushing the firing ring :/? Any tips
Efest batteries tight fit on a Nemesis Clone from fasttech?
- Thread starter tommyng
- Start date
- th_trl_thread_readers 0
- Status
If you mean length, the Nemesis has lots & lots of threads on the switch to adjust for length. Then a beauty ring to add if that isn't enough.
If the battery is a button top, that adds length to the battery. Try a flat top battery.
BTW, there is a Samsung INR 18650 25r 20 amp battery under that pretty purple wrapper.
35a is the PULSE rating.
If the battery is a button top, that adds length to the battery. Try a flat top battery.
BTW, there is a Samsung INR 18650 25r 20 amp battery under that pretty purple wrapper.
35a is the PULSE rating.
Sigh, that's what I thought too, but people said button tops were okay, and I didn't have much choice since they were the only ones available :/
Try measuring your battery. They are not all built the same. I have 2 Efest purple 18350's and one gets stuck loading into my Stingray. Have to Top load that battery. The other slides right in.
It isn't The Mod.
It isn't The Mod.
They both seem to be relatively tight fit on my mod, and button tops if that matters with 2500 mAh. I've removed the smallest piece on the nemesis, and thinking about removing the 'beauty ring' and seeing if it fires then. I have the screw ( sorry I'm not sure the same ) that unscrews for the 510 connector for the atomizer, in still, would removing or keeping that change anything?
- Status
Similar threads
