Ego Booster Owners Thread

[Bdbodger]

I though maybe we the owners of the new ego booster needed a thread to discuss what atties or cartomizers we have used with our boosters and what not to use . I will start . I used an ego mega atomizer type B with a filler cartridge in it . 2 ohm . It wore my 1000 mah batteries down in 3 to 4 hours . Now the ego mega ( some times called the XL ) atomizer type B is one of my favourers and you can buy them on Jack's site . They really don't need boosting and work good but some of the claims I have heard about the booster are that even at full boost your supposed to only loose 25% vaping time on the batteries . I have tried the booster on an echo bottom coil cartomizer and I can say it works very well . I also tried it on a new G4 and it works pretty good on those . So what have you used and how did the booster do with it .

 

[zer0ith]

I use my boosters with my 900 mah eV Torch, 650 mah eGo pass through battery and 650 mah regular eGo.
I've used them with my ce2's (2.4-2.6ohm & 2.6-2.8ohm), Vision 3ml 3ohm ce2 clone, SMOKtech 2.0 ohm 306 Atomizer, SMOKtech Regular 510 Wide-bridge Atomizer - 2.5 ohm, Vortex/G4 bottom coil carts, Sapphire Bud Atomizer 1.5ml Tank System 510 2.2-2.4ohm
All of them have performed amazingly well. I find different juices in the different setups work at different settings well. Its a bit of a game, I start off low and then start to crank it up until it tastes funny then back it down to perfection.

 

[Bdbodger]

As it turned out the ego mega atomizer with cartridge uses a lot of power . 5 hours without a booster on it and 4 hours with . I used a 3 ohm boge cartomizer today and a 2 ohm boge cartomizer and they where both excellent on the booster . You think the boge 2 ohm hits well , well try it on the booster wow great throat hit at under 4 volts . Here is an idea if you want lots to power to run your booster . This picture was actually taken before I got my booster . It is a portable power supply used for charging cell phones or Ipods . It didn't work on my phone but it is 5 volts contains 4x18650 batteries and works with an ego charger and ego passthrough battery .

 

[cleansohc]

Ive been using smoktech dual coil cartos in mine. Seems I use the booster with the "thicker" juice. Im a newb though.... but its workin for me!

The presentation box has come in very handy!!



IMG_0648 by filthypino, on Flickr

IMG_0650 by filthypino, on Flickr

IMG_0649 by filthypino, on Flickr

 

[Bdbodger]

OMG what you did to that good looking box . Nice mod though .

 

[GiMante]

That's awesome! That's creative thinking!

 

[slimest]

I made this baby from the Happy Vapers booster: http://www.e-cigarette-forum.com/fo...ck-boost-stick-based-happy-vaper-booster.html
Works great! Very small and powerful with AW IMR 18650 battery. Everything on the board, even charger.

 

[Happy Jack]

Hey Slimest!

That's awesome! I am always amazed at what talented modders can do. Great skill and creativity.

Thanks for sharing!

Happy Holidays and Happy Vaping!
Jack

 

[Happy Domino38]

I'm not as nice as Jack is...frankly, I'm jealous and demand that someone make me somethin' purty....

 

[Toronto_Mike]

Just a heads up to those with the booster - don't bother using it with the eGo-C. At half to full throttle - the taste becomes burnt. My initial findings with the SR heads. There is no advantage I can see with the booster & eGo-C.

 

[F_Munson]

Just a heads up to those with the booster - don't bother using it with the eGo-C. At half to full throttle - the taste becomes burnt. My initial findings with the SR heads. There is no advantage I can see with the booster & eGo-C.

Damn, I was just about to add one to my 'C'. Not doubting you Mike but any one else with similiar results?

 

[Bdbodger]

At under 1/2 power it is ok to use the booster with SR heads but not at 1/2 or more . So a slight amount of voltage increase works OK maybe at 1/3 power or so . If the ego-C is all you use you maybe better off with LR heads although I have not tried them yet . Toronto_Mike is right , not worth it for the slight amount of increased voltage that you would be able to use .

 

[F_Munson]

I have some of the C LR attys on the way along with some Vision Starburst SR clearomizers. Any one using the Starbursts with the booster?