received the red mega today. Man, I wish I had noticed that white base, don't know what they were thinking with that. One of these days I'll find a way to hold on to it so I can spin it and sand the finish off of it, and make it an all silver.
eGo ONE tank series – CLR coil
- Thread starter pufZeppelin
- Start date
- th_trl_thread_readers 0
- Status
All those people who poo poo stocking up and tell us the sky is not falling....they were wrong:
ProVape is now closed.
Due to upcoming FDA regulations and restrictions, we have made the decision to cease production and close operations.
We want to send out a HUGE Thank You to all of our customers, dealers and vendors around the world for your support and for sharing your stories and photos with us over the years.
This has really been an amazing experience and we were privileged to have you as our customer. It's been humbling to hear all the success stories and we are truly blessed to be a part of your lives. Thank you!
ProVape is now closed.
Due to upcoming FDA regulations and restrictions, we have made the decision to cease production and close operations.
We want to send out a HUGE Thank You to all of our customers, dealers and vendors around the world for your support and for sharing your stories and photos with us over the years.
This has really been an amazing experience and we were privileged to have you as our customer. It's been humbling to hear all the success stories and we are truly blessed to be a part of your lives. Thank you!
Well, there it is. A sad day, is all I can say right now.
Devastating.
Sent from my LGLS992 using Tapatalk
Sent from my LGLS992 using Tapatalk
HUGE sigh......
On my black mega V2, I'm getting some seepage at the seam where the base and the tank meet. I wonder if this is causing my occasional dry hits?
I occasionally have the same problem! I don't know the answer though as I've only had mine for 2 weeks
Hey 1.8! That's what I used to build in my PT2s. Don't unnershtan how PT2s could be called a PITA But that's neither here nor there.
Congrats on yer 1st CLR build hope you enjoy many many more!
Last edited:
check this out:
•this part can & will separate if you say, drop it or put sideways pressure on it (ask me how I know :wife)
you need to push the " threading base " back into the air flow base -- a LIGHT squeeze with pliers will do the trick *click*
not saying that is your problem NOW, but have a look...
•another is the COIL !
be sure your coil is seated COMPLETELY into the cavity
and be sure your coil CAP is on COMPLETELY
this is a dimension need / / if you don't assemble properly the tank won't close tight ONTO the O-ring that seals the juice chamber
only the coil needs to be TIGHT / the coil-cap will STOP without having to be super tight, and the tank to base only need to be snug...
•one more cause of " leak " can/could be condensation INSIDE the base UNDER the coil - nearly impossible to stop (condensation happens)
condensation pools inside the base (under the coil) and leaks/seeps out the air flow slot
when I experience this, I just wipe off ONE side and blow thru it (any excess comes out other side) DONE, about 3.4seconds...
Last edited:
Okay time for good news,
I just rebuilt my first clr with a 1.8 ohm coil!!!
This is big for me because I have only rebuilt pt2 heads and that was a PITA!
These things are simple!
I have to wait to vape on it cause my tank is being dried out today.
But so far it looks promising!
hey now ! that's GREAT !!!!!!!!
you are on your way - make some custom coils for your own pleasure...
- - -
OK, what you mean your waiting for a tank to DRY ?????????????
give it a whip, then a shake, burst a couple blows into it and be done with it (waiting to dry ??)
a little water never hurt anything... there is just NO NEED (silly boy)
if you really are concerned get a can of "CANNED-AIR"
check this out:
View attachment 634507
•this part can & will separate if you say, drop it or put sideways pressure on it (ask me how I know :wife)
you need to push the " threading base " back into the air flow base -- a LIGHT squeeze with pliers will do the trick *click*
not saying that is your problem NOW, but have a look...
•another is the COIL !
be sure your coil is seated COMPLETELY into the cavity
and be sure your coil CAP is on COMPLETELY
this is a dimension need / / if you don't assemble properly the tank won't close tight ONTO the O-ring that seals the juice chamber
only the coil needs to be TIGHT / the coil-cap will STOP without having to be super tight, and the tank to base only need to be snug...
•one more cause of " leak " can/could be condensation INSIDE the base UNDER the coil - nearly impossible to stop (condensation happens)
Great info! Do they sell replacement o rings? I didn't get any with my new tank
when I need o-rings, I just go to a big box store or a ACE hardware -- I have lots of o-rings around, don't knows sizes or material made of...
- O-Ring Replacements
- O-Rings
- O-Ring Seals - Hardware - Grainger Industrial Supply
- O-Ring Replacements
- O-Rings
- O-Ring Seals - Hardware - Grainger Industrial Supply
when I need o-rings, I just go to a big box store or a ACE hardware -- I have lots of o-rings around, don't knows sizes or material made of...
- O-Ring Replacements
- O-Rings
- O-Ring Seals - Hardware - Grainger Industrial Supply
Thanks, puf!![emoji106]
- Status
Similar threads
- Locked
